标准光模块
1000BASE-T SFP电口模块
Description
1000BASE-T SFP电口模块
设计用于通过Cat5铜缆的千兆以太网1000BASE-T链路。
特征:
• 热插拔SFP封装
• 符合SFP MSA标准
• 符合IEEE 802.3ab标准
• 支持1000Mb / s数据速率
• TX禁用和RX Los /无Los功能
• 具有SerDes接口的主机系统中的1000BASE-T操作
• 紧凑型RJ-45连接器组件
• 通过2线串行总线访问物理层IC
• 单3.3V电源
• 符合RoHS-6（无铅）
应用:
• 1000BASE-T
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
0-10Mb/s 多模双纤光收发一体模块
0-10Mb/s 多模双纤光收发一体模块
0-10M/S TTL MULTI-MODE DUPLEX FIBERS OPTICAL TRANSCEIVER
特点:
● SC/FC/ST 或尾纤型光接口,多模双纤收发一体光模块
● +3.3V /+5V 供电
● 接口电平兼容标准 TTL 电平和 CMOS 电平
● 标准 1×9 管脚封装
● 发射器件为 1310nm MQW FP LD 或 850nm VCSEL LD
● 极低功耗设计,满足特殊要求
● 传输速率低至直流,上限速率可选,最高可达 10Mb/s
0-10Mb/s Duplex Fibers SFP Optical Transceiver
0-10Mb/s Duplex Fibers SFP Optical Transceiver
Applications
● Applied to RS232、RS485 optical-electrical converter for electric power control and industrial control with bit rate up to 10Mbps
波长可调SFP+万兆光模块
波长可调SFP+万兆光模块
设计用于10G以太网,OTN OTU2e,10G光纤通道,SONET OC-192和SDH STM-64通过双工单模光纤链路,使用50GHz间隔的C波段可调谐DWDM波长。
波长可调XFP万兆光模块
波长可调XFP万兆光模块
设计用于10G以太网,OTN OTU2e,10G光纤通道,SONET OC-192和SDH STM-64通过双工单模光纤链路,使用50GHz间隔的C波段可调谐DWDM波长。
