标准光模块
100G CFP2 ER4
Description
ER4 CFP2 transceiver modules are designed for use in 100 Gigabit Ethernet links on up to 40km of single mode fiber. They are compliant with the CFP MSA, IEEE 802.3ba.The optical transceiver is RoHS compliant.
Features
● Hot-pluggable CFP MSA form factor
● Supports up to 111.8Gb/s aggregate bit rate
● Power dissipation <9w
● Commercial case temperature range of 0°C to 70°C
● Single 3.3V power supply
● Maximum link length of 40km on Single Mode Fiber (SMF)
● Aligned with IEEE 802.3ba
● 4x25G EML LAN-WDM transmitter
● 4x25G NRZ retimed CAUI-4 electrical interface
● Duplex LC receptacles
● MIDO management interface
● RoHS compliant
Application
● 100GBASE-ER4
Specifications
Data Rate：103.125Gb/s，111.8Gb/s
Distance：40km
Case Temperature：0~70℃
Voltage Supply：3.3V
Transmitter：4x LWDM DFB Laser
Receiver：PIN
Wavelength：1310nm BandTx 1310nm/Rx 1310nm
Connector：LC
Power consumption（Max）：9W
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
100G-CFP4-40
100G-CFP4-40
100G-CFP4-40 is Multi-Vendor MSA Compatible CFP4 (C = 100 in Roman numerals; Centum F = Form Factor; P = Pluggable; 4th generation) optical transceiver, designed to support 100G Ethernet (100GBASE-ER4) and 112G OTN according ITU-T G.959.1 ap¬plications using four parallel LAN WDM separated data lanes on each direction .
100G-CFP2-10
100G-CFP2-10
100G-CFP2-10 is Multi-Vendor MSA Compatible CFP2 (C (centum) Form Factor Pluggable 2) Transceiver, operating over 4 Parallel Lanes of Double Fiber Single-Mode Fiber (SMF) optical cable. It has minimum guaranteed optical budget of 6.3 dB, with in most cases is enough to reach about 10 km distance.
100G-CFP2-100
100G-CFP2-100
100G-CFP2-100 is Multi-Vendor MSA Compatible CFP2 (C (centum) Form Factor Pluggable 2) Transceiver, operating over 10 Parallel Lanes of Double Fiber Multi-Mode Fiber (MMF) optical cable. It has minimum guaranteed optical budget of 1.9 dB, with in most cases is enough to reach about 100m distance.
400G ZR+ QSFP-DD DCO
400G ZR+ QSFP-DD DCO
100G CFP LR4
100G CFP LR4
LR4 CFP transceiver modules are designed for use in 100 Gigabit Ethernet links on up to 10km of single mode fiber. They are compliant with the CFP MSA and IEEE 802.3ba 100GBASE-LR4.The optical transceiver is RoHS compliant.
100G CFP ZR4
100G CFP ZR4
ZR4 CFP transceiver modules are designed for use in 100 Gigabit Ethernet links on up to 80km of single mode fiber. They are compliant with the CFP MSA, IEEE 802.3ba.The optical transceiver is RoHS compliant.