标准光模块
100G CFP2 LR4 Rx单收光模块（10km）
Description
100G CFP2 LR4 Rx单收光模块（10km）
100GBASE-LR4和OTU4 10km CFP2光接收器设计用于100-Gigabit以太网和OTN链路，用于单模光纤（SMF）上长达10km的深度包检测（DPI）应用。
特征:
● 可热插拔的CFP2封装
● 接收器仅光模块,不带TOSA
● 支持111.8Gb/s的聚合速率
● 4通道PIN ROSA
● 3W功耗
● SMF的最大链路长度为10km
● 双工LC插座
● 工作温度范围:0至70°C
● 单3.3V电源
● 符合RoHS-6（无铅）
应用:
● 100GBASE-LR4 100G以太网
● OTN OTU4应用程序
● DPI应用程序
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
波长可调SFP+万兆光模块
波长可调SFP+万兆光模块
设计用于10G以太网,OTN OTU2e,10G光纤通道,SONET OC-192和SDH STM-64通过双工单模光纤链路,使用50GHz间隔的C波段可调谐DWDM波长。
波长可调XFP万兆光模块
波长可调XFP万兆光模块
设计用于10G以太网,OTN OTU2e,10G光纤通道,SONET OC-192和SDH STM-64通过双工单模光纤链路,使用50GHz间隔的C波段可调谐DWDM波长。
XGSPON ONU SFP+ 20km
XGSPON ONU SFP+ 20km
XGSPON ONU,20km,Tx 1270nm 9.953G,Rx 1577nm 9.953G,SFP +外形,SC / UPC或SC / APC插座连接器。 XGSPON标准,SFP +型ONU收发器模块（GNUP-2555S-R3CDH,GNUP-2555S-R3TDH,GNUP-2555S-S3CDH和GNUP-2555S-S3TDH）。
GEPON OLT SFP 30km
GEPON OLT SFP 30km
EPON OLT PX20 ++双工器,30km,Tx 1490nm 1.25G,Rx 1310nm 1.25G,SFP形状因数,SC / UPC插座连接器,GEPON OLT收发器模块（GETP-4311S-E3CDC）。