标准光模块
100G CFP4 SR4光模块（100m）
Description
100G CFP4 SR4光模块（100m）
北亿纤通（F-tone Networks）100G CFP4 SR4光模块专为通过双工多模光纤设计的100G以太网100GBASE-SR4,OTN OTU4和128G光纤通道链路而设计,支持使用850nm波长的OM4 MMF传输距离达100米。
特征:
● 可热插拔的CFP4外形
● 符合CFP MSA标准
● 符合IEEE 802.3bm 100GBASE-SR4标准
● 符合OTN OTU4
● 符合128GFC或4x32GFC
● 4通道全双工收发模块
● 支持112Gb / s的聚合比特率
● 基于4×28Gb / s 850mm VCSEL的变送器
● 4x28G电气串行接口（CEI-28G-VSR）
● 最大功耗2.5W
● OM4 MMF的最大链路长度为100米
● 采用标准的12/8通道光纤和MPO连接器
● 工作温度范围:0至70°C
● 单3.3V电源
● 符合RoHS-6（无铅）
应用:
● IEEE 802.3bm 100GBASE-SR4
● OTN OTU4
● 128GFC or 4x32GFC
Performance figures, data and any illustrative materialprovided in this data sheet are typical and must bespecifically confirmed in writing by F-tone beforethey become applicable to any particular order or
contract. In accordance with the F-tone policy ofcontinuous improvement specifications may change
without notice.
The publication of information in thisdata sheet does not imply freedom from patent or otherprotective rights of F-tone or others. Further detailsare available from any F-tone sales representative.
Related Products
100G CFP2 LR4
CFP2 LR4,100G CFP2 LR4:The CFP2-1310-LR4 is a fully integrated 100Gbit/s optical transceiver module that consists of a 1310 nm wavelength cooled EA-DFB LD, Driver IC, PIN photo-diode, pre-amplifier, dual clock and data recovery (CDR) ICs with 25 Gbit/s electrical interface which complies with CFP2 Multiple Source Agreement (MSA) specifications.
CFP4-100G-LR4-1310NM
CFP4 LR4,CFP4-100G-LR4-1310NM is a fully integrated 100Gbit/s optical transceiver module that consists of a 1310 nm wavelength cooled EA-DFB LD, Driver IC, PIN photo-diode, pre-amplifier, dual clock and data recovery (CDR) ICs with 25 Gbit/s electrical interface which complies with CFP2 Multiple Source Agreement (MSA) specifications. This compact size transceiver module is 50% smaller than F-tone Networks’s first generation CFP solution.
100GBASE-LR4 10km CFP4 Optical Transceiver
100GBASE-LR4 10km CFP4 Optical Transceiver：F-tone Networks's CFP4-100G-LR4 100G CFP4 optical transceiver modules are designed for use in 100 Gigabit Ethernet interfaces over single mode fiber. They are compliant with the CFP MSA and IEEE 802.3ba 100GBASE-LR4. Digital diagnostics functions are available via the MDIO interface, as specified by the CFP MSA and F-tone Networks Application Note FTAN-2015xx. The transceiver is RoHS-6 compliant and lead-free per Directive 2002/95/EC, and F-tone Networks Application Note FTAN-201538.
OTN Multirate 10km CFP4 Optical Transceiver
OTN Multirate 10km CFP4 Optical Transceiver：F-tone Netsworks’s Fiber 100G CFP4 transceiver modules are designed for use in 100 Gigabit Ethernet and 4x28G OTN client interfaces over single mode fiber. They are compliant with the CFP MSA, IEEE 802.3ba 100GBASE-LR4 and OTU4 4I1-9D1F requirements specified in ITU-T Recommendations G.959.1/G.709 and Supplement 39 (G.sup39). Digital diagnostics functions are available via the MDIO interface, as specified by the CFP MSA and F-tone Netsworks Application Note FTAN2015xx. The transceiver is RoHS-6 compliant and lead-free per Directive 2002/95/EC, and F-tone Netsworks Application Note FTAN201538.
100G CFP to QSFP28 Adapter
100G CFP to QSFP28 Adapter：北亿纤通100G CFP to 100G QSFP28 Adapter转接器实现CFP接口（10X10Gbps）与QSFP28接口（4X25Gbps）双向转换，满足IEEE 802.3ba 100GBASE-LR4和IEEE 802.3bm 100GBASE-SR4协议，最大功耗低于4W，支持前向纠错编码（FEC）、数字诊断（DDM）功能。为100G以太网和电信网提供高性能、热插拔互联方案。 经验证，采用100m OM4多模光纤进行传输，该模块实测功耗低于2.3W，并成功实现4小时连续工作零误码。
100G QSFP28 ER4 Lite光模块（40km）
100G QSFP28 ER4 Lite光模块（40km）
北亿纤通（F-tone Networks）的100G QSFP28 ER4 Lite光收发模块用于数据中心100GBASE-ER4以太网和5G中回传OTN OTU4光传送网链路,在设备不开启前向纠错（FEC）功能的条件下,通过单模光纤（SMF）传输距离最高可达30千米;在设备开启前向纠错功能的条件下,通过单模光纤传输距离最高可达40千米。