标准光模块
100G QSFP28 SR4 Active Optical Cable
Description
Description
The F-tone NetworksFT-MTRQ-4L101 QSFP28 transceiver modules are designed for use in 100 Gigabit Ethernet links over single mode fiber. They are compliant with the QSFP28 MSA , CWDM4 MSA and IEEE 802.3bm . Digital diagnostics functions are available via an I2C interface, as specified by the QSFP28 MSA.
Features
● Hot-pluggable QSFP28 form factor
● Supports 103.1 Gb/s aggregate bit rates
● Power dissipation < 3.5W RoHS-6 compliant (lead-free)
● Commercial case temperature range 0°C to 70°C
● Single 3.3V power supply
● Maximum link length of 2km on Single Mode Fiber (SMF) with KR4 FEC
● Duplex LC receptacles
● I2C management interface 4x25G retimed electrical interface
● 4x25Gb/s CWDM transmitter
Applications
● 100G CWDM4 applications with FEC
● Other Optical Links.
Standards
● Compliant with QSFP+ MSA.
● Compliant with SFF-8636.
● Compliant with IEEE802.3bm
● Compliant with RoHS6.
Absolute Maximum Ratings
|
Parameter |
Symbol |
Unit |
Min |
Max |
|
Storage Temperature Range |
Ts |
o C |
-40 |
85 |
|
Relative Humidity |
RH |
% |
0 |
85 |
|
Power Supply Voltage |
Vcc |
V |
-0.5 |
4 |
|
Receiver Damage Threshold, per Lane |
PT |
dBm |
5.5 |
|
Recommended Operating Conditions
|
Operating Case Temperature Range |
Tc |
o C |
0 |
- |
70 |
|
Power Supply Voltage |
Vcc |
V |
3.135 |
3.3 |
3.465 |
|
Total Data Rate |
|
Gbps |
- |
103.1 |
|
|
Maximum Data Rate per Lane |
|
Gbps |
|
25.78125 |
|
Specifications
Tested under recommended operating conditions, unless otherwise noted
|
Optical Transmitter Characteristics |
||||||
|
PARAMETER |
SYMBOL |
MIN |
TYPE |
MAX |
UNITS |
|
|
Bit Rate per Lane |
|
25.78125 ± 100 ppm |
GBd |
|||
|
Lane center wavelengths (range) |
CH0 |
λ0 |
1264.5 |
|
1277.5 |
nm |
|
CH1 |
λ1 |
1284.5 |
|
1297.5 |
nm |
|
|
CH2 |
λ2 |
1304.5 |
|
1317.5 |
nm |
|
|
CH3 |
λ3 |
1324.5 |
|
1337.5 |
nm |
|
|
Average Launch Power per Lane |
TXPx |
|
|
2.5 |
dBm |
|
|
Side-Mode Suppression Ratio |
SMSR |
30 |
|
|
dB |
|
|
Transmit OMA per Lane |
OMA |
-4 |
|
2.5 |
dBm |
|
|
Launch Power (OMA-TDP) |
|
-5 |
|
|
dBm |
|
|
Extinction Ratio |
ER |
3.5 |
|
|
dB |
|
|
Transmitter and Dispersion Penalty per Lane |
TDP |
|
|
3 |
dB |
|
|
Average launch power of OFF transmitter, per lane |
|
|
|
-30 |
dBm |
|
|
TTransmitter eye mask definition {X1, X2, X3, Y1, Y2, Y3} |
|
{0.31, 0.4, 0.45, 0.34, 0.38, 0.4} |
||||
|
Transmitter Reflectance |
|
|
|
-12 |
dB |
|
|
Optical Receiver Characteristics |
|
|||||
|
PARAMETER |
SYMBOL |
MIN |
TYPE |
MAX |
UNITS |
|
|
Bit Rate per Lane |
|
25.78125 ± 100 ppm |
GBd |
|||
|
Lane center wavelengths (range) |
CH0 |
λ0 |
1264.5 |
|
1277.5 |
nm |
|
CH1 |
λ1 |
1284.5 |
|
1297.5 |
nm |
|
|
CH2 |
λ2 |
1304.5 |
|
1317.5 |
nm |
|
|
CH3 |
λ3 |
1324.5 |
|
1337.5 |
nm |
|
|
Receive Saturation (OMA) per Lane |
|
2.5 |
|
|
dBm |
|
|
Damage threshold per Lane |
|
3.5 |
|
|
dBm |
|
|
Unstressed Receiver Sensitivity (OMA) per Lane |
|
|
|
-10 |
dBm |
|
|
Stressed Receiver Sensitivity (OMA) per Lane |
|
|
|
-7.3 |
dBm |
|
|
Conditions of stressed receiver sensitivity test: |
|
|||||
|
Vertical Eye Closure Penalty |
VECP |
|
|
1.9 |
dB |
|
|
Stressed J2 Jitter |
J2 |
0.33 |
|
|
UI |
|
|
Stressed J4 Jitter |
J4 |
0.48 |
|
- |
UI |
|
|
LOS De-Assert |
LOSD |
|
|
-11 |
dBm |
|
|
LOS Assert |
LOSA |
-25 |
|
|
dBm |
|
|
LOS Hysteresis |
|
0.5 |
|
|
dB |
|
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
OSFP 400G 10km光模块
OSFP 400G 10km光模块
北亿纤通推出的OSFP是一种新型的可插拔形式，拥有8条高速电子通道，最初支持400gbps(8×50g)。它比QSFP稍宽稍深，但仍然IU面板可以支持32个OSFP接口，每1U可支持12.8 Tbps。400G光学器件需要比100G光学器件更多的功耗，其中许多光器件不适合现有的QSFP封装。
10G SFP+ BIDI
10G SFP+ BIDI
北亿纤通 10G SFP + BIDI光收发模块是用于双向光数据通信的小型可插拔模块，例如由IEEE 802.3ae，OBSAI和CPRI光链路定义的10GBASE-LR / LW。 它采用SFP+20针连接器，可实现热插拔功能。收发器设计用于发送/接收8.5Gbps至10.3Gbps的数据速率。
400G QSFP-DD AOC
400G QSFP-DD AOC
北亿纤通400G有源光缆产品是一对8对并行有源光缆，用于存储，数据和高性能计算连接。该产品通过多模光纤提供8个独立的数据传输通道和8个数据接收通道，每个通道的运行速度可达50Gb / s。因此，该产品可以实现100米传输的400Gb / s的总数据速率。该产品符合SFF8436, 8432, 8472和IEEE802.3bm的QSFP规范。
100G QSFP28 AOC有源光缆
100G QSFP28 AOC
北亿纤通的100G有源光缆产品是4对并行有源光缆，用于存储，数据和高性能计算连接。 该产品通过多模光纤提供4个独立的数据传输通道和4个数据接收通道，每个通道能够以25Gb/s的速度运行，因此该产品可以实现70米/OM3传输的总数据速率为100Gb/s。 该产品符合SFF8665和IEEE802.3bm的QSFP28规范。
6G 10km SFP+ Transceiver
6G 10km SFP+ Transceiver
FT-MTRS-6E31-01is a high performance, cost effective modules, which is supporting Multi Rate 1.25-6.25Gbps, and transmission distance up to 10km on SM fiber. The transceiver consists of two sections: The transmitter section incorporates a 1310nm DFB Laser and a driver.
50G QSFP28 ER
50G QSFP28 ER
The F-tone NetworksFT-MTRQ-1EA42 QSFP28 transceiver modules is a high performance, cost effective module for 50 Gigabit Ethernet links up to 40km over single mode fiber. They are compliant with the QSFP28 MSA, and IEEE 802.3cd.