标准光模块
100G QSFP28 to (2) 50G QSFP28 Y Cable Passive 0.5~3 meter
Description
Description
F-tone Networks's 100G QSFP28 to 2x 50G QSFP28 Copper Breakout Cable application is a "Y" assembly which is a hybrid transition from a QSFP on one terminal to two individual QSFP on the other. The QSFP28 to 2x 50G QSFP Break-out DAC Cable, the terminal of 50G QSFP28 offers channel 1 and channel 2, each operating at up to 28Gbps.
- 100G to 2x 50G
- Length: 0.5~3 meters
- 4ch QSFP28 to（2）2ch QSFP28 Y Cable
- Passive
- MCU
- 30/28/26AWG
- Low power consumption
- Excellent EMI performance
- Temp. Range(℃): 0~70
- Ethernet 100G, 40G
- InfiniBand 4X SDR, DDR, QDR, EDR, FDR
- Fiber Channel 10G, 40G, 100G
- Rack-to-Rack, Shelf-to-Shelf Interconnect
- TOR (Top of Rack)
- 100G Ethernet (IEEE 802.3bj)
- InfiniBand EDR
- SFF-8665
- RoHS compliant
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
100GBase-SR4 QSFP28 Transceiver for MMF, 70/100 meters (MPO/MTP)
100GBase-SR4 QSFP28 Transceiver for MMF, 70/100 meters (MPO/MTP)
F-tone Networks's QSFP28 SR4 is a parallel 100Gb/s Quad Small Form-factor Pluggable (QSFP28) optical module. It provides increased port density and total system cost savings.
100GBase-LR4 QSFP28 Transceiver for SMF, 10 km
100GBase-LR4 QSFP28 Transceiver for SMF, 10 km
F-tone Networks's QSFP28 LR4 is a 100Gb/s transceiver module designed for optical communication applications compliant to 100GBASE-LR4 of the IEEE P802.3ba standard.
100GBase-PSM4 QSFP28 (Parallel Single Mode 4 lanes) for MPO/MTP SMF, 1.4 km
100GBase-PSM4 QSFP28 (Parallel Single Mode 4 lanes) for MPO/MTP SMF, 1.4 km
F-tone Networks’s FT-77-AMQ28-IR4-02 is a pluggable, four-channel QSFP28 optical transceiver with bi-directional signal transmission and aggregate 100-Gbps bandwidth for 100G Ethernet. It features the Parallel Single Mode 4 Lane (PSM4) and transmission range of up to 2 km over SMF.
40 G QSFP+ to (4) SFP+ AOC Cable, OM3 MMF
40 G QSFP+ to (4) SFP+ AOC Cable, OM3 MMF
F-tone Networks’s QSFP+ to 4x SFP+ AOC cable is a 40GBase QSFP+ hybrid optical cable. A side is a QSFP+ optical connector, B side is 4 SFP+ optical connectors. It’s an application for the link with QSFP+ port on 40Gb/s rate switch or host and feeds up to 4 upstream 10Gb/s switch or host.
100 G QSFP28 to QSFP28 Twinax Copper Passive DAC Cable 0.5~5 meter
100 G QSFP28 to QSFP28 Twinax Copper Passive DAC Cable 0.5~5 meter
100Gb/s QSFP28 DAC, 8 pair differential copper pairs providing four data transmission channels at speeds up to 28Gbps per channel, and meets 100G Ethernet (4 x 25Gb/s) and InfiniBand EDR (Enhanced Data Rate) requirements.
100 G QSFP28 to (4) SFP28 Twinax Copper Passive DAC Cable 0.5~3 meter
100 G QSFP28 to (4) SFP28 Twinax Copper Passive DAC Cable 0.5~3 meter
100G QSFP28 to 4x 25G SFP28 Copper Breakout Cable application is "break-out" DAC assembly which is a hybrid transition from a QSFP28 on one terminal to four individual SFP28 on the other. The QSFP28 to four parallel bi-directional channels each operating at up to 25Gbps.