标准光模块
10Gb/s 40km Datacom SFP+ Transceiver
Specifications
- 产品型号: SFP-10G-40KM
- 兼容品牌: 全系列
- 封装类型: SFP+
- 传输速率: 9.95 to 10.3Gb/s and 8.5Gb/s
- 传输距离: Maximum link length of 40km
- 发射波长: 1510nm
- 接收波长: 1510nm
- 工作温度: 商业级0℃～+70℃/工业级-40℃～+85℃ 可选
- 数字诊断: 带DDM
- 接收灵敏度: Maximum link length of 40km
- 接收灵敏度: Maximum link length of 40km
Description
10Gb/s 40km Datacom SFP+ Transceiver
F-tone's 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 40km over single mode fiber. They are compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-ER/EW, and will also support 8.5Gb/s Fibre Channel data rate traffic without requiring rate-select. The SFP-10G-40KM incorporates advanced CMLTM technology, and is a "limiting module", i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer's recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC, and F-tone Application Note AN-2018.
Key Features
Hot-pluggable SFP+ footprint
Supports 9.95 to 10.3Gb/s and 8.5Gb/s bit rates
Power dissipation < 1.5W; Typical <1W
RoHS-6 compliant (lead-free)
Commercial temperature range 0°C to 70°C
Single 3.3V power supply
Maximum link length of 40km
1550nm cooled CMLTM technology
Receiver limiting electrical interface
Duplex LC connector
Built-in digital diagnostic functions
Applications
10GBASE-ER/EW 10G Ethernet
8G Fibre Channel Rate Support
Specifications
Form Factor SFP+
Distance 40 km
Protocol 10 Gigabit Ethernet Compliant
8 Gb/s Fibre Channel Compatible
Data Rate (max) 10.3 Gb/s
Low End Case Temperature 0°C to 70°C/-40°C to 85°C
High End Case Temperature 0°C to 70°C/-40°C to 85°C
Diagnostics Digital
Transmitter CML(TM)
Receiver PIN
Voltage Supply 3.3
Connector LC
Related Products
6G 850nm SFP+ Transceiver
F-tone's FTCS-8561-02X SFP+ transceivers are designed for use in wireless application of links up to 6.1 Gb/s data rate over multimode fiber. The product is RoHS compliant and lead-free per Directive 2002/95/EC.
8GFC 850nm SFP+ Transceiver
F-tone's FTCS-8585-02X SFP+ transceivers are designed for use in Fibre Channel links up to 8.5 Gb/s data rate over multimode fiber. They are compliant with FC-PI-4 Rev. 8.00 and SFF-8472 Rev 11.0, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 4.1. The product is RoHS compliant and lead-free per Directive 2002/95/EC and F-tone Application Note FN-2038.
16GFC 850nm SFP+ Transceiver
F-tone's FTCS-85FX-02X SFP+ transceivers are designed for use in Fibre Channel links up to 14.025 Gb/s data rate over multimode fiber. They are compliant with FC-PI-5 Rev. 6.00, SFF-8472 Rev 11.0 and SFF-8081, and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 4.1. The product is RoHS compliant and lead-free per Directive 2002/95/EC and F-tone Application Note FN-2038.
10Gb/s 220m Datacom SFP+ Transceiver
F-tone's FTCS-131X-02X 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 220m over Multi Mode fiber. They are compliant with SFF-8431, SFF-8432 and IEEE 802.3 aq 10GBASE-LRM. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTCS-131X-02X is a "linear module" i.e. it employs a linear receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer's recommended settings for interoperating the host board EDC PHY with a linear receiver SFP+ module. The transceiver is RoHS compliant and lead-free per Directive 2002/95/EC, and F-tone Application Note FN-2032.
10Gb/s 10km Datacom SFP+ Transceiver
F-tone's FTCS-131X-10X 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 10km over Single Mode fiber. They are compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-LR/LW and 10G Fibre Channel 1200-SM-LL-L. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTCS-131X-10X is a "limiting module", i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer's recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC, and F-tone Application Note AN-2034
2/10km Multi-Rate SFP+ Transceiver
F-tone's SFP 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit, multi-rate links up to maximum 10km over G.652 single mode fiber. They are compliant with SFF-8431, SFF-8432, ITU-T G.693 VSR2000-2R1, SDH I-64.1 and OTN P1I1-2D1 (up to 2km), IEEE 802.3ae 10GBASE-LR/LW and 10G Fibre Channel 1200-SM-LL-L (up to 10km). Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.