高速线缆

标准协议光模块

兼容协议光模块

其它种类光器件

技术支持

10G SFP+有源电缆

0.0/5 rating (0 votes)

Description

F- tone公司专业研发制造10G SFP+有源电缆、10G SFP+ Active Cable,符合MSA SFF-8431, 应用于10G以太网等数据中心互联场景。100%完美兼容全系列品牌服务器,交换机,路由器,PDH/SDH传输设备,EPON,GPON,10G EPON,10G GPON,WDM PON基站等等全系列设备

10G SFP+有源电缆


SFP+ Direct Attach Active Copper Cables ,5m、7m、10m、12m Reach

Features

  1. Support for multi-gigabit data rates up to 10.5Gbps
  2. Data rates backward compatible to 1Gbps
  3. Hot-pluggable SFP 20PIN footprint
  4. I/O Connector designed for high speed differential signal applications
  5. Improved Pluggable Form Factor(IPF) compliant for enhanced EMI/EMC performance
  6. Low Power Consumption < 0.5W
  7. Power Supply :+3.3V
  8. Compatible to SFP+
  9. Temperature Range: 0~ 70 °C
  10. RoHS Compatible

Applications

  1. High capacity I/O in Storage Area Networks, Network Attached Storage, and Storage Servers
  2. Switched fabric I/O such as ultra high bandwidth switches and routers
  3. Data center cabling infrastructure
  4. High density connections between networking equipment

Product Description

The SFP+ active cable assemblies are high performance, cost effective I/O solutions for 10Gb Ethernet and 10G Fiber Channel applications. SFP+ copper modules allow hardware manufactures to achieve high port density, configurability and utilization at a very low cast and reduced power budget. The high speed cable assemblies meet and exceed Gigabit Ethernet and Fiber Channel industry standard requirements for performance and reliability.

Recommended Operating Conditions

Parameter

Symbol

Min

Typical

Max

Unit

Storage Ambient Temperature

 

-40

 

+85

°C

Operating Case Temperature

Tc

0

 

+70

°C

Power Supply Voltage

VCC3

3.14

3.3

3.47

V

Power Dissipation

PD

   

0.5

W

Systems

Performance

Media

Operating parameters

10.5Gbps line speed, full duplex

Bit error rate: better than 10E-12

Hot-pluggable, industry-standard Small Form-Factor

Pluggable(SFP+) copper cable, available max 10m

Supply voltage: 3.3V

Power consumption(per end): max 0.5W

Pin Descriptions

Pin

Logic

Symbol

Name/Description

Notes

1

 
VeeT
Transmitter Ground
 

2

LV-TTL-O

TX_Fault

N/A

1

3

LV-TTL-I

TX_DIS

Transmitter Disable

 

4

LV-TTL-I/O

SDA

Tow Wire Serial Data

 

5

LV-TTL-I

SCL

Tow Wire Serial Clock

 

6

 

MOD_DEF0

Module present, connect to VeeT

 

7

LV-TTL-I

RS0

N/A

1

8

LV-TTL-O

LOS

LOS of Signal

 

9

LV-TTL-I

RS1

N/A

1

10

 

VeeR

Reciever Ground

 

11

 

VeeR

Reciever Ground

 

12

CML-O

RD-

Reciever Data Inverted

 

13

CML-O

RD+

Reciever Data Non-Inverted

 

14

 

VeeR

Reciever Ground

 

15

 

VccR

Reciever Supply 3.3V

 

16

 

VccT

Transmitter Supply 3.3V

 

17

 

VeeT

Transmitter Ground

 

18

CML-I

TD+

Transmitter Data Non-Inverted

 

19

CML_I

TD-

Transmitter Data Inverted

 

20

 

VeeT

Transmitter Ground

 

1. Signals not supported in SFP+ Copper pulled-down   to VeeT with 30K ohms resistor

Ordering information

Part Number

Product Description

SFP-10GAC-5

SFP+ Direct Attach Active Cable(10GSFP+Cu), 5m, AWG:26, 0ºC ~ +70ºC

SFP-10GAC-7

SFP+ Direct Attach Active Cable(10GSFP+Cu), 7m, AWG:24, 0ºC ~ +70ºC

SFP-10GAC-10

SFP+ Direct Attach Active Cable(10GSFP+Cu), 10m, AWG:24, 0ºC ~ +70ºC

SFP-10GAC-12

SFP+ Direct Attach Active Cable(10GSFP+Cu), 12m, AWG:24, 0ºC ~ +70ºC

Note: You can be customized diameter and distance.

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be

specifically confirmed in writing by F-tone before they become applicable to any particular order or

contract. In accordance with the F-tone policy of continuous improvement specifications may change

without notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone or others. Further details are available from any F-tone sales representative.

 

Search