10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 10km over a single-strand Single Mode fiber. This capability doubles the capacity of installed legacy single mode fiber links. They are compliant with SFF-8431 and IEEE 802.3ae 10GBASE-LR/LW, and 10G Fibre Channel 1200-SM-LL-L. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.
This is a “limiting module”, i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer’s recommended settings for interoperating the host-board EDC PHY with a limiting receiver SFP+ module. The optical transceiver is RoHS compliant as described in Application Note AN-2038.

Features
● Hot-pluggable SFP+ footprint
● Bidirectional 10G over single strand single mode fiber
● Supports 1.0 to 11.3 Gb/s bit rates
● Power dissipation <1W
● RoHS compliant
● Industrial temperature range -40°C to 85°C
● Single 3.3V power supply
● Maximum link length of 10km
● Uncooled DFB
● Receiver limiting electrical interface
● Single LC connector
● Built-in digital diagnostic functions

Applications
● 10GBASE-LR/LW 10G Ethernet
● 1000BASE-LX10 Gigabit Ethernet
● 1200-SM-LL-L 10G Fibre Channel
● 2.457 Gb/s CPRI
● 3.072 Gb/s CPRI/LTE
● 4.915 Gb/s CPRI/LTE
● 6.144 Gb/s CPRI/OBSAI/LTE
● 9.8304 Gb/s CPRI/LTE

注：本产品有全国产化型号可选
Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.