标准光模块
10GBASE-ER/OC-192 IR-2 Multirate 40km SFP+ Optical Transceiver
Description
Theoptical transceivers are Enhanced Small Form Factor Pluggable (SFP+) transceivers designed for use in 10-Gigabit multi-rate links up to 40km of G.652 single mode fiber. They are compliant with SFF-8431, SFF-8432, SONET OC-192 IR-2R/3R, SDH STM-64.2b/3b, OTN P1S1-2D2b, 10GBASE-ER/EW and support 8.5G and 10G Fibre Channel. The FTLX1672M3BCL transceivers use internal clock and data recovery (CDR) IC’s for the transmitter and receiver. This guarantees compliance with the SONET/SDH jitter requirements and it can be used to set the electrical interface to be XFI-compliant.
Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The optical transceiver is RoHS compliant as described in Application Note AN-2038.
Features
● Hot-pluggable SFP+ footprint
● Supports 8.5 and 9.95 to 11.3 Gb/s
● 40km link length (800ps/nm)
● Internal transmitter/receiver CDR
● Low power consumption
● Cooled 1550nm EML laser
● Limiting electrical interface receiver
● Duplex LC connector
● Built-in digital diagnostic functions
● RoHS compliant
● Case temperature range: -5°C to 70°C
Applications
● SONET OC-192 IR-2/-3
● SDH STM-64.2b/3b
● OTN G959.1 P1S1-2D2b
● OTN G.709 OTU1e/2/2e FEC bit rates
● 10GBASE-ER/EW
● 8.5/10G Fibre Channel
注：本产品有全国产化型号可选
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
10G 10km 1310nm Extended Temperature Single Mode Datacom SFP+ Optical Transceiver
10G 10km 1310nm Extended Temperature Single Mode Datacom SFP+ Optical Transceiver
Extended Temperature 10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 10km over Single Mode fiber. They are compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-LR/LW and 10G Fibre Channel 1200-SM-LL-L.
10G 10km 1310nm Industrial Temperature Single Mode Datacom SFP+ Optical Transceiver
10G 10km 1310nm Industrial Temperature Single Mode Datacom SFP+ Optical Transceiver
10Gb/s Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 10km over Single Mode fiber. They are compliant with SFF-8431, SFF-8432 and IEEE 802.3ae 10GBASE-LR/LW and 10G Fibre Channel 1200-SM-LL-L, and can support CPRI options 7 (9.83Gb/s) and 8 (10.137Gb/s) over 10km links.
10GBASE-ER 40km SFP+ Optical Transceiver
10GBASE-ER 40km SFP+ Optical Transceiver
The optical transceivers are Enhanced Small Form Factor Pluggable (SFP+) transceivers designed for use in 10-Gigabit multi-rate links up to 40km of G.652 single mode fiber. They are compliant with SFF-8431, SFF-8432 and 10GBASE-ER, and support 10G Fibre Channel, as well as CPRI option 2 through 8, over 40km links.
10GBASE-ER/EW 40km SFP+ Optical Transceiver
10GBASE-ER/EW 40km SFP+ Optical Transceiver
The optical transceivers are Enhanced Small Form Factor Pluggable (SFP+) transceivers designed for use in 10-Gigabit multi-rate links up to 40km of G.652 single mode fiber. They are compliant with SFF-8431, SFF-8432 and 10GBASE-ER/EW; support 4x, 8x, and 10x Fibre Channel, as well as CPRI option 2 through 8, over 40km links.
1.2G-11.3G 40km Industrial Temperature DWDM SFP+ Optical Transceiver
1.2G-11.3G 40km Industrial Temperature DWDM SFP+ Optical Transceiver
The optical transceivers are Enhanced Small Form Factor Pluggable SFP+ transceivers designed for use in DWDM links up to 40km of G.652 single mode fiber, for multirate applications from 1.2 through 11.3 Gb/s, carrying 1G-10G Ethernet, 2x-10x Fibre Channel, 10G OTN traffic or CPRI options 2 through 8 traffic. The transceivers are compliant with SFF-8431 and SFF-8432.
10G Multirate 40km Industrial Temperature DWDM SFP+ Optical Transceiver
10G Multirate 40km Industrial Temperature DWDM SFP+ Optical Transceiver
The optical transceivers are Enhanced Small Form Factor Pluggable SFP+ transceivers designed for use in DWDM links up to 40km of G.652 single mode fiber, for multirate applications from 1.2 through 11.3 Gb/s, carrying 1-10G Ethernet, 1-10G Fibre Channel, 10G OTN traffic or CPRI options 2 through 8 traffic. The transceivers are compliant with SFF-8431 and SFF-8432.