标准光模块
10Gb/s SFP+ 850nm 光收发模块（定制款工业级）
Description
10Gb/s SFP+ 850nm 光收发模块（定制款工业级）
产品描述
FTCS-C85xx1X-DZxx SFP+光模块设计用于多模光纤上300米以内的万兆以太网链路。该模块由高度集成的光学子组件中的850nm VCSEL激光器、1310nm PIN和前置放大器组成。数字诊断功能可通过SFF-8472中规定的2线串行接口获得。
FTCS-C85xx1X-DZxx光模块提供了独特的增强型数字诊断监测接口，可实时访问设备操作参数，如光模块温度、激光偏置电流、传输光功率、接收光功率和光模块电源电压。它还定义了一个复杂的警报和警告标志系统，当特定的操作参数超出工厂设定的正常范围时，该系统会向最终用户发出警报。
SFP+MSA在EEPROM中定义了一个256字节的内存映射，可通过8位地址1010000X（A0h）的2线串行接口进行访问。数字诊断监控接口使用8位地址1010001X（A2h），因此最初定义的序列号存储器映射保持不变。
产品特征
● 高达11.3Gb/s的数据链路
● 850nm VCSEL激光器和1310nm PIN接收器
● 50/125µm MMF上可达300米
● 可热插拔SFP+占地面积
● 双工LC/UPC型可插拔光接口
● 符合RoHS-10标准且无铅
● 支持数字诊断监测接口
● 符合SFF+MSA和SFF-8472
● 单路+3.3V电源
● 金属外壳，用于降低EMI
● 满足ESD要求，抗8KV直接接触电压
● 外壳工作温度
工业级：-40～+85℃
应用
● 10GBASE-SR/SW和10G以太网
● SDH STM64
● 其他光链路
机械尺寸
订购信息
|
产品型号 |
速率(Gb/s) |
波长 (nm) |
传输距离(m) |
温度范围（级别） |
|
FTCS-C85xx1X-DZxxI |
10.3125 |
850 |
300m MMF |
-40~85 Industrial |
备注：LOS脚是OMA LOS模式，有信号加载的时候低电压，有光无信号加载或者无光的时候高电压。
注：本产品有全国产化型号可选
本产品为SFP+系列光模块，仅展示部分参数，如有需要，请您联系我们。
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
4G Fibre Channel (4GFC) 150m SFP Optical Transceiver
4G Fibre Channel (4GFC) 150m SFP Optical Transceiver
4G Fibre Channel (4GFC) 150m SFP Optical Transceiver is a Small Form Factor (SFP) transceivers are compatible with the SFP Multi-Sourcing Agreement (MSA). They are compatible with Fibre Channel FC-PI-2 Rev. 7.0. Rate selectable versions are also compatible with Gigabit Ethernet as specified in IEEE Std 802.3.
2.5Gb/s SFP DWDM 160km Optical Transceiver Module
2.5Gb/s SFP DWDM 160km Optical Transceiver Module
Description
F-tone Networks’FTCS-Dxx24-H6Dxx transceivers include an APD photo-detector diode and temperature stabilized DWDM EML transmitter. Digital diagnostic functions are available via an I2C.This module is designed for single mode fiber and operates at a nominal wavelength of 100GHz ITU Grid, C Band DWDM wavelength.
3.125Gb/s SFP 1550nm 80km Optical Transceiver Module
3.125Gb/s SFP 1550nm 80km Optical Transceiver Module
Description
FTCS-1531-80Dxx Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA), The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the DFB laser and the APD photo-detector .
3.125Gb/s SFP+ 850nm Optical Transceiver Module
3.125Gb/s SFP+ 850nm Optical Transceiver Module
Description
FTCS-8531-02Dxx SFP+ transceiver is designed for use in Gigabit Ethernet links up to 300m over Multi-mode fiber. The module consists of 850nm VCSEL Laser, PIN and Preamplifier in a high-integrated optical sub-assembly. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.
4.25Gb/s SFP+ 1550nm 80km Optical Transceiver Module
4.25Gb/s SFP+ 1550nm 80km Optical Transceiver Module
Description
FTCS-1542-80Dxx SFP+ transceiver is designed for use in 4.25-Gigabit Ethernet links up to 80km over single mode fiber. The module consists of 1550 EML Laser, APD and Preamplifier in a high-integrated optical sub-assembly. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.
10Gb/s SFP+ 850nm 光收发模块（定制款军品级）
10Gb/s SFP+ 850nm 光收发模块（定制款军品级）
产品描述
FTCS-851X-DZM-210726 SFP+光模块设计用于多模光纤上300米以内的万兆以太网链路。该模块由高度集成的光学子组件中的850nm VCSEL激光器、1310nm PIN和前置放大器组成。数字诊断功能可通过SFF-8472中规定的2线串行接口获得。