标准光模块
16G Fiber Channel 14.025Gb/s 850nm 100m SFP+ Optical Transceiver
Description
The FT-BE-F8504 SFP+ transceiver is designed for using in Fiber Channel up to 14.025Gb/s over multimode fiber. It is compliant with FC-PI-5 Rev.6.01,SFF-8431 and SFF-8432. It consumes low power, operates from a 3.3V DC power supply and is offered in the commercial temperature range.
| Part Number | Package | Interface | Reach | Temp | Fiber Type | Wavelength | Rate | Tx Output | Rx Input |
|---|---|---|---|---|---|---|---|---|---|
| FT-BE-F8504-BC+ | SFP+ | LC | 100m | C | Multi-mode | 850nm | 16Gb/s | -7.8~0dBm | -10.5dBm |
Features
● LC Duplex optical interface
● +3.3V power supply
● Bail latch
● Hot swappable
● High performance 850nm VCSEL laser
● High sensitivity PIN/TIA optical receiver
● Multi Mode operation
● BER < 1X10-12(PRBS 231-1 NRZ test pattern)
● Internally AC coupled and terminated
● RoHS compliance
注：本产品有全国产化型号可选
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
SFP+ XGSPON ONU Transceiver
SFP+ XGSPON ONU Transceiver
The FT-BE-F7225 is a XGSPON ONU duplex optical transceiver designed for low cost point-to-multipoint (P2MP) Fiber to the Home (FTTH), Business or Curb (FTTx) applications. It employs a 1577nm CW mode downlink ADP/TIA receiver operating at 9.95328Gb/s and a 1270nm DFB burst mode uplink transmiter operating at 9.95328Gb/s.
Four Lambda 10G / 1G Symmetrical Quadplexer SFP+ 10G EPON OLT Transceiver
Four Lambda 10G / 1G Symmetrical Quadplexer SFP+ 10G EPON OLT Transceiver
The FT-BE-F5302 is a combination of 10G EPON OLT and 1G EPON OLT optical transceivers in a SFP+ housing.The 10G bidirectional link is configured with 1270nm/1577nm optics and the 1G link is configured with 1310nm/1490nm optics.
CLASS C++ 2488/1244Mb/s With Digital RSSI SFP GPON OLT Transceiver
CLASS C++ 2488/1244Mb/s With Digital RSSI SFP GPON OLT Transceiver
It is based on the ITU-T G.984.2 Class C+ specifications for bidirectional communications over a single fiber and incorporates a high performance 1310nm Burst Mode APD/TIA receiver and 1490nm CW mode DFB transmitter with internal optical isolator.
25Gb/s 40km SFP28 Optical Transceiver
25Gb/s 40km SFP28 Optical Transceiver
850nm SFP28 Optical Transceiver
850nm SFP28 Optical Transceiver
Fiber Chanel 850nm 2.125/4.25/8.5Gb/s 50m-500m SFP+ Optiaca Transceiver
Fiber Chanel 850nm 2.125/4.25/8.5Gb/s 50m-500m SFP+ Optiaca Transceiver
The FT-BE-F8503 SFP+ triple rate transceiver is intended for up to 500m reach service in 2.125Gb/s to 8.5Gb/s 850nm multi mode, high-speed LAN and SAN data communications equipment where low-cost, extraordinary performance and reliability are essential.