标准光模块
1x9 2~84Mbps 850nm 多模光模块
Specifications
- 产品型号: 1x9 2~84Mbps 850nm 多模光模块
- 兼容品牌: 全系列
- 封装类型: 1x9
- 传输速率: 2~84Mbps
- 传输距离: 0~160KM可选
- 发射波长: 850nm
- 接收波长: 850nm
- 工作温度: 商业级0℃～+70℃/工业级-40℃～+85℃ 可选
- 数字诊断: 不带DDM
- 接收灵敏度: 1x9 2~84Mbps 850nm 多模光模块
- 接收灵敏度: 1x9 2~84Mbps 850nm 多模光模块
Description
Product Description
F-tone’sFLTR-8502H-02X series of transceiver modules are the perfect solution for Low-speed communication networks. The transceiver modules support data rates up 2 to 52 Mbps. These modules are fully compliant with the Multi-sourced 1×9 protocol.The transceiver modules suppliesthe TTL interface of 5.0 Voltage and provide the system designer with products to implement arange of low-speed data and digital video transmission designs at the 2 to 52 Mbps rate for fiber communications.
Product Features
- Multi-sourced 1 x 9 pin packaged
- 850nm VCSEL Laser Transmitter
- ST/SC/FCreceptacle
- Up to 0.5Km with 62.5/125μm MMF
- Single 3.3V/5V power supply
- TTL signal input and output
- TTL logic level signal detect output
- Wave Solderable and washable with process plug inserted
- Two temperature ranges:
— 0°C to +70°C
— -40°C to +85°C for industry level
Application
- Fiber System
- Digital Video
Absolute Maximum Ratings
Operating of the transceiver beyond the Absolute Conditions Listed in Table 1 will degrade or damage the product. It’s not implied that the product would function above the recommended operating environment, it’s possible to reduce the reliability and lifetime of device if Recommended Operating Environment is exceeded (Refer to table 2)
Table 1-- Absolute Maximum Conditions
|
Parameter |
Symbol |
Min |
Max |
Units |
|
Storage Temperature |
TST |
-40 |
+85 |
℃ |
|
Operating Temperature |
TOP |
0 |
+70 |
℃ |
|
Supply Voltage |
VCC |
0 |
+6 |
V |
|
Relative Humidity |
RH |
5 |
95 |
% |
|
Lead Soldering Temperature & Time |
- |
- |
260/10 |
℃/S |
Table 2-- Recommended Operating Environment
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Supply Voltage |
VCC |
4.75 |
5.0 |
5.25 |
V |
|
Ambient operating Temperature |
TOP |
0 |
- |
+70 |
℃ |
|
Supply Current |
ITX+IRX |
- |
100 |
150 |
mA |
Optical Parameters
Table 3 FLTR-8502H-02X Transceiver Optical and Electrical Characteristics
(Ambient Operating Temperature Ta=0°C to +70°C, VCC =4.75V to 5.25V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
- |
- |
52 |
Mb/s |
|
Output Center Wavelength |
λC |
830 |
850 |
860 |
nm |
|
Output Spectral width (RMS) |
λ |
- |
- |
0.85 |
nm |
|
Average Optical Output Power |
PO |
-15 |
-8 |
-5 |
dBm |
|
Extinction Ratio |
EXT |
10 |
- |
- |
dB |
|
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
|
Receiver |
|||||
|
Receiver Sensitivity |
PMIN |
- |
- |
-30 |
dBm |
|
Maximum Input Power |
PMAX |
-3 |
- |
- |
dBm |
|
Signal Detect -- Asserted |
PA |
- |
- |
-30 |
dBm |
|
Signal Detect -- Deasserted |
PD |
-42 |
- |
- |
dBm |
|
Signal Detect - Hysteresis |
PHYS |
1.0 |
- |
4.0 |
dB |
Electrical Parameters
Table 4 (Ambient Operating Temperature Ta=0°C to +70°C, VCC = 4.75V to 5.25V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Power Supply Current |
ICC |
- |
- |
50 |
mA |
|
Data Input Current - Low |
IIL |
-350 |
- |
- |
μA |
|
Data Input Current - High |
IIL |
- |
- |
350 |
μA |
|
Data Input Voltage - Low |
VIL |
- |
- |
0.7 |
V |
|
Data Input Voltage - High |
VIH |
2.0 |
- |
- |
V |
|
Receiver |
|||||
|
Power Supply Current |
ICC |
- |
- |
100 |
mA |
|
Data Output Voltage – Low |
VOL |
- |
- |
0.7 |
V |
|
Data Output Voltage – High |
VOH |
2.0 |
- |
- |
V |
|
Signal Detect Output Voltage-Low |
VOL |
- |
- |
0.7 |
V |
|
Signal Detect Output Voltage-High |
VOH |
2.0 |
- |
V |
|
Pin Assignment & Signal Definition
|
Pin # |
Pin Name |
Description |
|
1 |
Rx VEE |
Receiver Signal Ground |
|
2 |
RD+ |
Receiver Data Out |
|
3 |
N/C |
N/C |
|
4 |
SD |
Signal Detect |
|
5 |
Rx VCC |
Receiver Power Supply |
|
6 |
Tx VCC |
Transmitter Power Supply |
|
7 |
N/C |
N/C |
|
8 |
TD+ |
Transmitter Data In |
|
9 |
Tx VEE |
Transmitter Ground |
Order Information
Table 1: 3.3V Order Information
|
FLTR-8502-02 |
1X9,2~84Mbps rate,850(VCSEL),0.5KM,SC, 0°C to +70°C |
|
FLTR-8502-02I |
1X9,2~84Mbps rate,850(VCSEL),0.5KM,SC, -40°C to +85°C |
|
FLTR-8502-02F |
1X9,2~84Mbps rate,850(VCSEL),0.5KM,FC, 0°C to +70°C |
|
FLTR-8502-02FI |
1X9,2~84Mbps rate,850(VCSEL),0.5KM,FC, -40°C to +85°C |
|
FLTR-8502-02T |
1X9,2~84Mbps rate,850(VCSEL),0.5KM,ST, 0°C to +70°C |
|
FLTR-8502-02TI |
1X9,2~84Mbps rate,850(VCSEL),0.5KM,ST, -40°C to +85°C |
Table 2: 5V Order Information
|
FLTR-8502H-02 |
1X9,2~84Mbps rate,850(VCSEL),0.5KM,SC, 0°C to +70°C |
|
FLTR-8502H-02I |
1X9,2~84Mbps rate,850(VCSEL),0.5KM,SC, -40°C to +85°C |
|
FLTR-8502H-02F |
1X9,2~84Mbps rate,850(VCSEL),0.5KM,FC, 0°C to +70°C |
|
FLTR-8502H-02FI |
1X9,2~84Mbps rate,850(VCSEL),0.5KM,FC, -40°C to +85°C |
|
FLTR-8502H-02T |
1X9,2~84Mbps rate,850(VCSEL),0.5KM,ST, 0°C to +70°C |
|
FLTR-8502H-02TI |
1X9,2~84Mbps rate,850(VCSEL),0.5KM,ST, -40°C to +85°C |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must bespecifically confirmed in writing by F-tone Networks before they become applicable to any particular order orcontract. In accordance with the F-tone Networks policy of continuous improvement specifications may changewithout notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
SFP-1.25G-1550NM
Up to 1.25Gb/s bi-directional data links
Hot-pluggable SFP footprint
Using 9/125 μm SMF 40KM~160KM transmission distance
Optional with digital diagnostic functions
1550nm Laser transmitter
Duplex LC connector
RoHS compliant and lead-free
Metal enclosure, for lower EMI
Single 3.3V power supply
Operating temperature: 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
0~10Mbps SFF2x5低速率光模块
多端柔性直流输电系统专用， 0~10Mbps SFF2x5低速率光模块完美解决方案：FLAF-1300-02X series of transceiver modules are the perfect solution for Low-speed communication networks. Comply with the SFF (MSA). The transceivers are RoHS compliant and lead-free per Directive 2002/95/EC5. Support data rates up to 10Mbps.It provide good immunity to RF electromagnetic fields and excellent EMC/EMI performance.
SFF单模双纤光模块选型表
SFF单模双纤光模块选型表：
SFF DC0~10Mbps SM Transceiver Module
SFF 155Mbps SM Transceiver Module
SFF 622Mbps SM Transceiver Module
SFF 1250Mbps SM Transceiver Module
SFF 2488Mbps SM Transceiver Module
SFF单模单纤光模块选型表
SFF单模双纤光模块选型表：
SFF DC0~10Mbps BIDI Transceiver Module
SFF 155Mbps BIDI Transceiver Module
SFF 622Mbps BIDI Transceiver Module
SFF 1250Mbps BIDI Transceiver Module
SFF 2488Mbps BIDI Transceiver Module
SFF2x5 4.25Gbps光模块
SFF光模块-2x5封装 4.25Gbps速率：
- Up to 4.25Gbps/4GFC or other data links
- Standard 2x5 PIN SFF footprint (MSA compliant)
- Duplex LC connector
- Very low jitter
- Metal enclosure, for lower EMI
- Single 3.3V power supply
- 1310nm or 1550nm wavelength Laser Transmitter
- Up to 120 Km on 9/125μm SMF
- LVPECL/CML Signal Input and Output
- LVTTL Signal Detect
- Low power dissipation
- Excellent EMI and ESD protection
- Compliant with Small Form Factor (SFF) Transceivers Multi-Sourcing Agreement (MSA)
- Two temperature ranges:
0°C to +70°C
-40°C to +85°C for industry level
1x9 DC0~2Mbps光模块
F-tone’sFLTR-1X01H-XX series of transceiver modules are the perfect solution for Low-speed communication networks. The transceiver modules support data rates up to 500Kbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The transceiver modules supplies the TTL interface of 5.0 Voltage and provide the system designer with products to implement a range of low speed data and fiber MODEM designs at the DC~500Kbps rate for fiber communications.Commerce level transceiver module which operating at 0℃ to 70℃ and Industry level which operating extended temperature as -40℃ to +85℃ for available.