标准光模块
2.5G SFP光模块
Description
2.5G SFP光模块
北亿纤通2.5G SFP光模块专为单模单模光纤上的SONET OC-48和SDH STM-16链路而设计,采用850nm,1310nm或1550nm波长。
特征:
•可热插拔的SFP封装
•符合SFP MSA标准
•单通道全双工收发模块
•支持高达2.67Gb/s的数据速率
•双LC接口
•单3.3V电源
•符合RoHS-6（无铅）
应用:
• 快速以太网
• 千兆以太网
• 1GFC / 2GFC
• OC-3 / STM-1
• OC-24 / STM-8
• OC-48 / STM-16
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
0-10Mb/s 多模双纤光收发一体模块
0-10Mb/s 多模双纤光收发一体模块
0-10M/S TTL MULTI-MODE DUPLEX FIBERS OPTICAL TRANSCEIVER
特点:
● SC/FC/ST 或尾纤型光接口,多模双纤收发一体光模块
● +3.3V /+5V 供电
● 接口电平兼容标准 TTL 电平和 CMOS 电平
● 标准 1×9 管脚封装
● 发射器件为 1310nm MQW FP LD 或 850nm VCSEL LD
● 极低功耗设计,满足特殊要求
● 传输速率低至直流,上限速率可选,最高可达 10Mb/s
0-10Mb/s 多模双纤光收发一体模块
0-10Mb/s 多模双纤光收发一体模块
0-10M/S TTL MULTI-MODE DUPLEX FIBERS OPTICAL TRANSCEIVER
特点:
● SC/FC/ST 或尾纤型光接口,多模双纤收发一体光模块
● +3.3V /+5V 供电
● 接口电平兼容标准 TTL 电平和 CMOS 电平
● 标准 1×9 管脚封装
● 发射器件为 1310nm MQW FP LD 或 850nm VCSEL LD
● 极低功耗设计,满足特殊要求
● 传输速率低至直流,上限速率可选,最高可达 10Mb/s
0-10Mb/s 多模双纤光收发一体模块
0-10Mb/s 多模双纤光收发一体模块
0-10M/S TTL MULTI-MODE DUPLEX FIBERS OPTICAL TRANSCEIVER
特点:
● SC/FC/ST 或尾纤型光接口,多模双纤收发一体光模块
● +3.3V /+5V 供电
● 接口电平兼容标准 TTL 电平和 CMOS 电平
● 标准 1×9 管脚封装
● 发射器件为 1310nm MQW FP LD 或 850nm VCSEL LD
● 极低功耗设计,满足特殊要求
● 传输速率低至直流,上限速率可选,最高可达 10Mb/s
0-10Mb/s 多模双纤光收发一体模块
0-10Mb/s 多模双纤光收发一体模块
0-10M/S TTL MULTI-MODE DUPLEX FIBERS OPTICAL TRANSCEIVER
特点:
● SC/FC/ST 或尾纤型光接口,多模双纤收发一体光模块
● +3.3V /+5V 供电
● 接口电平兼容标准 TTL 电平和 CMOS 电平
● 标准 1×9 管脚封装
● 发射器件为 1310nm MQW FP LD 或 850nm VCSEL LD
● 极低功耗设计,满足特殊要求
● 传输速率低至直流,上限速率可选,最高可达 10Mb/s
0-10Mb/s Duplex Fibers SFP Optical Transceiver
0-10Mb/s Duplex Fibers SFP Optical Transceiver
Applications
● Applied to RS232、RS485 optical-electrical converter for electric power control and industrial control with bit rate up to 10Mbps
