2x100GBASE-SR4 QSFP-DD Active Optical Cable
Features
ü 8 channels full-duplex transceiver modules
ü Transmission data rate up to 26Gbps per channel
ü Compliant with QSFP-DD MSA V5.0 and CMIS V4.0
ü 8 channels 850nm VCSEL array
ü 8 channels PIN photo detector array
ü Internal CDR circuits on both receiver and transmitter channels
ü Support CDR bypass
ü Low power consumption <4W
ü Hot Pluggable QSFP DD form factor
ü Maximum link length of 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF
ü MPO24 connector receptacle
ü Built-in digital diagnostic functions
ü 3.3V power supply voltage
ü RoHS 6 compliant(lead free)
ü Case operating temperature
Commercial:0 ~ +70℃
Industrial:-40 ~ +85℃
Applications
ü IEEE 802.3bm 100GBASESR4
Description
The F-tone NetworksTechnologiesFTQD-2H-SR4-QD-Oxxx is anEight-Channels, Pluggable, Parallel, Fiber-Optic QSFP Double Density for 2x100Gigabit Ethernet Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnection applications. It integrates eight data lanes in each direction with 8x25.78125Gbps bandwidth. Each lane can operates at 25.78125Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber.These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 76 contact edge type connector. The optical interface uses a 24 fiber MTP (MPO) connector. This module incorporates F-tone Networks Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
Ordering Information
Part Number |
Product Description |
FTQD-2H-SR4-QD-Oxxx |
2x100GBASE-SR4 QSFP-DD Active Optical Cable,xxx is length of fiber cable, up to 70m on OM3 Multimode Fiber (MMF)and up to 100m on OM4MMF,0 ~ +70℃ |
FTQD-2H-SR4-QD-OxxxI |
2x100GBASE-SR4 QSFP-DD Active Optical Cable,xxx is length of fiber cable, up to 70m on OM3 Multimode Fiber (MMF)and up to 100m on OM4MMF, -40 ~ +85℃ |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must bespecifically confirmed in writing by F-tone before they become applicable to any particular order or contract. In accordance with the F-tone policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone or others. Further details are available from any F-tone sales representative.