标准光模块
40G Ethernet 100m CFP Optical Transceiver Module
Specifications
- 产品型号: CFP-40G-100M
- 兼容品牌: 全系列
- 封装类型: CFP
- 传输速率: Supports 41.2 Gb/s aggregate bit rate
- 传输距离: 100m on OM3 Multimode Fiber (MMF)
- 发射波长: SR4
- 接收波长: SR4
- 工作温度: 商业级0℃～+70℃/工业级-40℃～+85℃ 可选
- 数字诊断: 带DDM
- 接收灵敏度: 100m on OM3 Multimode Fiber (MMF)
- 接收灵敏度: 100m on OM3 Multimode Fiber (MMF)
Description
40G Ethernet 100m CFP Optical Transceiver Module
F-tone’s CFP-40G-100M 40G CFP transceiver modules are designed for use in 40 Gigabit Ethernet links over multimode fiber. They are compliant with the CFP MSA and IEEE 802.3ba 40GBASE-SR4. Digital diagnostics functions are available via an MDIO interface, as specified by the CFP MSA and F-tone Application Note AN-2078. The transceiver is RoHS-6 compliant and lead-free per Directive 2002/95/EC, and F-tone Application Note AN-2012.
Key Features
- Hot-pluggable CFP form factor
- Supports 41.2 Gb/s aggregate bit rate
- Power dissipation < 6W
- RoHS-6 compliant (lead-free)
- Commercial temperature range 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- Single 3.3V power supply
- Maximum link length of 100m on OM3 Multimode Fiber (MMF)
- Uncooled 4x10Gb/s 850nm transmitter
- XLAUI electrical interface
- Single MPO receptacle
- Built-in digital diagnostic functions
- Applications
- 40GBASE-SR4 40G Ethernet
Specifications
- Form Factor CFP
- Distance 100 m
- Protocol 40 Gigabit Ethernet Compliant
- Data Rate (max) 41.2 Gb/s
- Low End Case Temperature (°C) 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- High End Case Temperature (°C) 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- Diagnostics Digital
- Transmitter VCSEL
- Receiver PIN
- Voltage Supply 3.3
- Connector N/A
Related Products
QSFP-40G-SR4
- 4 independent full-duplex channels
- Up to 11.2Gbps data rate per channel
- MTP/MPO optical connector
- QSFP+ MSA compliant
- Digital diagnostic capabilities
- Capable of over 100m transmission on OM3 multi-mode ribbon fiber
- CML compatible electrical I/O
- Single +3.3V power supply
- Operating case temperature: 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- XLPPI electric interface (with 1.5W Max power)
- RoHS-6 compliant
QSFP-40G-LR4
- Compliant with 40G Ethernet IEEE802.3ba and
- 40GBASE-LR4 Standard
- QSFP+ MSA compliant
- Compliant with QDR/DDR Infiniband data rates
- Up to 11.2Gbps data rate per wavelength
- 4 CWDM lanes MUX/DEMUX design
- Up to 10km transmission
- Operating case temperature: 0~70C
- Maximum 3.5W operation power
- RoHS compliant
CFP2-100G-SR10
CFP2-100G-SR10 CFP2, 850 nm, 3.3 V, 100GBASE-SR10 Compliant Pluggable Ethernet Optical Transceiver
CFP-100G-SR10
- Transmission data rate up to 11.2Gbit/s per channel
- CFP MSA compliant
- Compliant to IEEE 802.3ba specification for 100GBASE-SR10 links
- Up to 11.2 Gbps per channel bandwidth,
- OTU4 compatible
- 10 channels 850nm VCSEL array
- 10 channels PIN photo detector array
- OM3 Multimode Fiber cable of up to 300m and OM4 Multimode Fiber cable of up to 400m
- MDIO digital diagnostic and control capabilities.
- compliant to CFP MSA Management Interface Specification, Draft 1.4
- TX input and RX output CDR retiming
- Hot pluggable electrical interface
- Power class 1 (<8W max)
- Operating case temperature 0°C to +70°C
- 3.3V power supply
- RoHS 6 compliant(lead free)
CFP-40G-SR4
- Transmission data rate up to 11.2Gbit/s per channel
- CFP MSA compliant
- Compliant to IEEE 802.3ba specification for 40GBASE-SR4 links
- Up to 11.2 Gbps per channel bandwidth,
- OTU3 compatible
- 4 channels 850nm VCSEL array
- 4 channels PIN photo detector array
- OM3 Multimode Fiber cable of up to 300m and OM4 Multimode Fiber cable of up to 400m
- MDIO digital diagnostic and control capabilities.
- compliant to CFP MSA Management Interface Specification, Draft 1.4
- TX input and RX output CDR retiming
- Hot pluggable electrical interface
- Power class 1 (<8W max)
- Operating case temperature 0°C to +70°C
- 3.3V power supply
- RoHS 6 compliant（lead free）
100G Ethernet 10km CFP Optical Transceiver Module
F-tone’s CFP-100G-LR4 100GE CFP transceiver modules are designed for use in 100 Gigabit Ethernet links over single mode fiber. They are compliant with the CFP MSA and IEEE 802.3ba 100GBASE-LR4. Digital diagnostics functions are available via an MDIO interface, as specified by the CFP MSA and F-tone Application Note AN-2080. The transceiver is RoHS-6 compliant and lead-free per Directive 2002/95/EC, and F-tone Application Note AN-2033.