其它产品
795nm DFB Light Source
Description
Description
F-tone Networks’stabilized DFB lasers are high output power, narrow linewidth light sources with high side mode suppression ratios. They are available at any customer-specified wavelengths and any ITU wavelength in the S, C, L bands at for optical sensing applications. DFB Laser are available in benchtop or OEM module. In the benchtop unit, the output power , alarms and driving current values are shown on the LCD display. Output power can be adjusted by tuning the front panel control knob. Also active emission button is used to enhance operation safety. 1MHz intensity modulation is also available. The OEM module version is an ideal building block for OEM system integrators, especially in fiber optic sensing applications. It requires only a single +5V power supply with low power consumption.
Feathure
Wide wavelength coverage
High output power
Good wavelength stability
Compact size
Good performance cost ratio
Two year warranty
Application
Optical component testing
Gas analysis
Biomedical analysis
Spectroscopy
Research & development
Specification
|
Parameters |
Unit |
Specification |
||
|
Min |
Typ |
Max |
||
|
Part NO. |
|
FT-93-795-B-DFB |
||
|
Output power |
mW |
- |
40 |
- |
|
Central Wavelength |
nm |
794 |
795 |
796 |
|
Spectrual width（FWHM）with FBG |
MHz |
- |
10 |
- |
|
SMSR |
dB |
35 |
45 |
55 |
|
Polarization Extinction Ratio(PER) |
dB |
20 |
- |
- |
|
Output power stability（15min）2 |
% |
- |
±0.1 |
±0.5 |
|
Output power stability（8hours）2 |
% |
- |
±0.5 |
±1.0 |
|
Output power adjustable range |
% |
0 |
- |
100 |
|
Output power Adjustable Mode |
|
Coarse/Fitness |
||
|
Power supply |
VAC |
170 |
220 |
260 |
|
Power consumption3 |
W |
- |
- |
5 |
|
Operation temperature |
℃ |
0 |
- |
50 |
|
Storage temperature |
℃ |
-40 |
- |
85 |
|
Output fiber type |
|
Panda 5/125um NA=0.13 |
||
|
Lengh of the output type |
m |
> 1 |
||
|
Optical connectors |
|
FC/APC |
||
|
Dimension |
mm |
270(L)×235(W)×105(H) |
||
1.The central wavelength can be Customized；
2.The test condition of the power stability is 25℃，30mins Warming up；
3.The bigest power consumption tested under the extreme condition.
Ordering information
FT-93-795-B-DFB-PW-SP
B：Benchtop
PW：output power,unit:mW.eg：10-10mW，50-50Mw
SP：Output isolator 0-without, 1-with
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
1310nm SLD Light Source
1310nm SLD Light Source
F-tone Networks offers different equipments to the optical communication industry. Our main products include both optical source and transmitter for converting an electrical signal into an optical signal, followed by passing through optical fiber and multiple kinds of amplifiers for signal modification, and finally optical receivers to recover the signal to electrical signal.
1064nm SLD Light Source
1064nm SLD Light Source
F-tone Networks offers different equipments to the optical communication industry. Our main products include both optical source and transmitter for converting an electrical signal into an optical signal, followed by passing through optical fiber and multiple kinds of amplifiers for signal modification, and finally optical receivers to recover the signal to electrical signal.
760nm DFB Light Source
760nm DFB Light Source
F-tone Networks’stabilized DFB lasers are high output power, narrow linewidth light sources with high side mode suppression ratios. They are available at any ITU wavelength in the S, C, L bands and at any customer-specified wavelengths for optical sensing applications. DFB Laser are available in benchtop or OEM module. In the benchtop unit, the output power , alarms and driving current values are shown on the LCD display. Output power can be adjusted by tuning the front panel control knob.
1083nm DFB Light Source
1083nm DFB Light Source
F-tone Networks’stabilized DFB lasers are high output power, narrow linewidth light sources with high side mode suppression ratios. They are available at any customer-specified wavelengths and any ITU wavelength in the S, C, L bands at for optical sensing applications.
1064nm DFB Light Source
1064nm DFB Light Source
F-tone Networks’stabilized DFB lasers are high output power, narrow linewidth light sources with high side mode suppression ratios. They are available at any customer-specified wavelengths and any ITU wavelength in the S, C, L bands at for optical sensing applications.
852nm DFB Light Source
852nm DFB Light Source
F-tone Networks’stabilized DFB lasers are high output power, narrow linewidth light sources with high side mode suppression ratios. They are available at any customer-specified wavelengths and any ITU wavelength in the S, C, L bands at for optical sensing applications.