Description
产品型号:(Avago:AFBR-5903EZ(替换型号:FTAF-M1303-02xx))
产品描述:SFF2x5-1300nm-155M-3.3V-Data:LVPECL-SD:LVPECL-LC
兼容品牌:Avago
原厂描述:SFF2x5-1300nm-155M-3.3V-Data:LVPECL-SD:LVPECL-LC
Features
• Multisourced 2 x 5 package style with MT-RJ receptacle
• Single +3.3 V power supply
• Wave solder and aqueous wash process compatible
• Full compliance with the optical performance requirements of the FDDI PMD standard
• Full compliance with the FDDI LCF-PMD standard
• Full compliance with the optical performance requirements of the ATM 100 Mb/s physical layer
• Full compliance with the optical performance requirements of 100 Base-FX version of IEEE802.3u
• “RoHS”compliance
• Receiver output squelch function enabled
Applications
• Multimode fber backbone links
• Multimode fber wiring closet to desktop links
Ordering Information
The AFBR-5903Z 1300 nm product is available for pro duction orders through the Avago Technologies Component Field Sales Ofces and Authorized Distributors world wide.
AFBR-5903Z = 0°C to +70°C
No Shield
AFBR-5903EZ = 0°C to +70°C
Extended Shield
AFBR-5903AZ = -40°C to +85°C
No Shield.
Description
The AFBR-5903Z family of transceivers from Avago Technologies provide the system designer with products to implement a range of FDDI and ATM (Asynchronous
Transfer Mode) designs at the 100 Mb/s-125 MBd rate.The transceivers are all supplied in the new industry standard 2 x 5 DIP style with a MT-RJ fber connector interface.
FDDI PMD, ATM and Fast Ethernet 2 km Backbone Links The AFBR-5903Z is a 1300 nm product with optical performance compliant with the FDDI PMD standard. The FDDI PMD standard is ISO/IEC 9314-3: 1990 and ANSI X3.166 - 1990.
These transceivers for 2 km multimode fber backbones are supplied in the small 2 x 5 MT-RJ package style for those designers who want to avoid the larger MIC/R (Media Interface Connector/Receptacle) defned in the FDDI PMD standard.
Avago Technologies also provides several other FDDI productscompliantwiththePMDandSM-PMDstandards.These products are available with MIC/R, ST©, SC and FC connector styles.They are available in the 1 x 9, 1 x 13 and 2 x 11 transceiver and 16 pin transmitter/receiver pack
age styles for those designs that require these alternate confgurations. The AFBR-5903Z is also useful for both ATM 100 Mb/s interfaces and Fast Ethernet 100 Base-FX interfaces. The ATMForumUser-NetworkInterface(UNI)Standard,Version 3.0, defnes the Physical Layer for 100 Mb/s Multimode Fiber Interface for ATM in Section 2.3 to be the FDDI PMD Standard. Likewise, the Fast Ethernet Alliance defnes the Physical Layer for 100 Base-FX for Fast Ethernet to be the FDDI PMD Standard.ATM applications for physical layers other than 100Mb/s Multimode Fiber Interface are supported by Avago Technologies. Products are available for both the single-mode and the multimode fber SONET OC-3c (STS-3c), SDH (STM-1) ATM interfaces and the 155 Mb/s- 194 MBd multimode fber ATM interface as specifed in the ATM Forum UNI.
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.