兼容光模块
AFBR-5922ALZ
Description
AFBR-5922ALZ
The Avago AFBR-5922ALZ is a high performance, cost-effective SFF optical transceiver for serial optical data communication applications supporting 2.125 and 1.0625 Gb/s data rates. This module is designed for multimode fiber and operates at a nominal wavelength of 850 nm. The transceiver incorporates 3.3VDC compatible technology including an 850nm VCSEL transmitter. The AFBR-5922ALZ offers maximum design flexibilty enabling Fibre Channel designers and system integrators to implement a wide range of solutions for multimode Fibre Channel applications. This product is fully compliant with all equipments meeting the Fibre Channel FC-PI 200-M5-SN-I and 200-M6-SN-I 2.125 GBd specifications, and is compliant with the Fibre Channel FC-PI 100-M5-SN-I, FC-PI 100-M6-SN-I, FC-PH2 100-M5-SN and FC-PH2 100-M6-SN-I 1.0625 GBd specifications. The AFBR-5922ALZ is also compliant with the SFF Multi Source Agreement (MSA).
特征描述：
- 完全符合 RoHS 标准要求
- 数据率：
- FC-PI 200-M5-SN-I 和 FC-PI 200-M6-SN-I 时为 2.125GBd
- FC-PI 100-M5-SN-I 和 FC-PI 100-M6-SN-I 时为 1.0625GBd
- 2.125GBd 时链路连接距离：
- 0.5 至 300 米 - 50/125 μm MMF
- 0.5 至 150 米 - 62.5/125 μm MMF
- 1.0625GBd 时链路连接距离：
- 0.5 至 300 米 - 50/125 μm MMF
- 0.5 至 150 米 - 62.5/125 μm MMF
- 采用 850nm 垂直腔面发射激光器 (VCSEL)
- 符合以下激光 AEL Class I 护眼要求：
- US 21 CFR (J)
- EN-60825-1 (All)
- -40ºC 到 +85ºC 工业
- 级温度和 3.3V ± 1% 电源电压
- 采用产业标准 2 x 5 SFF 封装
- 兼容波峰焊和水洗工序
规格：
| 产品类别： | LC |
|---|---|
| 光纤样式： | Multimode Glass |
| 最远距离(M)： | 500 |
| 标称光波长 (nm)： | 850 |
| 发射器： | VCSEL |
Related Products
AFBR-83EDxxZ
AFBR-83EDxxZ
The Avago AFBR-83EDxxZ is a pluggable 10-channel, parallel optics CXP Active Optical Cable (AOC) for multi-channel 10Gbps proprietary interconnect and 100 Gigabit Ethernet (100GbE) applications.
The AFBR-83EDxxZ is designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. The electrical interface uses an 84-contact edge type connector. The AOC incorporates Avago Technologies' proven integrated circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
AFBR-83CDxxZ
AFBR-83CDxxZ
AFBR-79Q2EKZ
AFBR-8420EVK
AFBR-8420EVK
The Avago AFBR-8420EVK evaluation kit is designed to provide designers with a convenient means of evaluating Avago 100G CFP2 SR10 module. The evaluation kit supports the Avago AFBR-8420Z, a 10-channel pluggable, multi-mode parallel optic transceiver module for high-density 100G Ethernet and Optical Transport Network (OTN) applications.
SFP Extender Board
SFP Extender Board
The SFP extender board was designed to access SFP low speed control signals while a DUT SFP compliant to SFF-8074 is plugged into the target application system such as a network switch and router.