AFBR-812VxyZ

北亿纤通专业研发生产兼容安华高AFBR-812VxyZ,Avago AFBR-812VxyZ,安华高AFBR-812VxyZ光模块,Avago AFBR-812VxyZ光模块,安华高AFBR-812VxyZ光纤模块,Avago AFBR-812VxyZ光纤模块,安华高Avago AFBR-812VxyZ光模块,安华高Avago AFBR-812VxyZ光纤模块，100%完美兼容安华高Avago AFBR-812VxyZ光模块:电气参数兼容，光学参数兼容。

The AFBR-812VxyZ and AFBR-822VxyZ are a set of 12-channel, pluggable, parallel fiber optics transmitter and receiver modules optimized for short-range parallel multi-lane data communication and interconnect applications. These high-speed, high density optical modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm.

Avago's MiniPOD solution offers system designers two module package options to optimize their cable management and board layout. AFBR-812RxyZ Tx/AFBR-822RxyZ Rx is used with round multi-lane cable assemblies for applications requiring multiple turns of the jumper cable inside the chassis. AFBR-812FxyZ Tx/AFBR-822FxyZ Rx is used with flat ribbon cable assemblies, allowing dense tiling of the modules as the jumper cables can be thread under the dust-cap of the next module. This top mounted optical connection maximizes board layout density by eliminating board space lost to the optical connector and strain relief.

The electrical interface uses a 9×9 MEG-Array connector with 1.27 mm pitch

The optical interface requires the user to provide a custom designed optical turn 1×12 ribbon cable PRIZM® LightTurn® connector.

The thermal interface provided can require either a user provided heat sink or use of the Avago general purpose clip on heat sink, to maintain the module case temperature to be between 0°C to 70°C during continuous operation.

MiniPOD Transmitter Part Numbers

• AFBR-812FxyZ Flat Ribbon Jumper Cable, Transmitter Base Part Number
• AFBR-822FxyZ Flat Ribbon Jumper Cable, Receiver Base Part Number
• AFBR-812RxyZ Round Jumper Cable, Transmitter Base Part Number
• AFBR-822RxyZ Round Jumper Cable, Receiver Base Part Number

Features

• 12.5 Gbps with 64b/66b encoded data
• Compliant to IEEE 802.3ba 100GbE (100GBASE-SR10 and nPPI) per lane
• Compatible with 12×QDR InfiniBand
• Operates at 10 Gbps per channel with 8b/10b encoded data for IB-QDR application, and at 10.3125 Gbps and up to 12.5 Gbps with 64b/66b encoded data, for 100GbE and proprietary applications
• High Aggregate bandwidth: 150 Gbps per module
• High density footprint: 21.95 mm × 18.62 mm size
• Two package options to optimize internal cable management and system layout
• Separate transmitter and receiver modules
• 850 nm VCSEL array in transmitter; PIN array in receiver
• Links up to 150 m, from 10.3125 Gbps to 11.5 Gbps, and 100 m at 12.5 Gbps with OM4 4700 MHz•km fiber
• Optical Interface: PRIZM® LightTurn® optical turn 1×12 ribbon fiber connector
• Pluggable electrical interface: 9×9 MEG-Array for ease of design and manufacturability
• Low Power consumption: 3.7 W Max per Transmitter/Receiver pair (0°C to 70°C operating range)
• Dedicated signals for module address, module reset and host interrupt
• Two Wire Serial (TWS) interface with maskable interrupt for expanded functionality including:
  • Individual channel functions: disable, squelch disable, lane polarity inversion, TX eye margin enable
  • A/D read back: module temperature and supply voltages, per channel laser current and laser power, or received power
  • Status: per channel Tx fault, electrical (transmitter) or optical (receiver) LOS, and alarm flags
  • Programmable equalization integrated with DC blocking caps at transmitter data input
  • Programmable receiver output swing and deemphasis level
  • Field Upgradable Firmware capability
• 0°C to 70°C case temperature continuous operating range. 85°C supported for short durations

Important Notice

Performance figures,data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone before they become applicable to any particular order or contract. In accordance with the F-tone policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone or others. Further details are available from any F-tone sales representative.