AFBR-824VxyZ
The AFBR-824VxyZ are a set of 12-channel, pluggable, parallel fiber optics transmitter and receiver modules optimized for short-range parallel multi-lane data communication and interconnect applications. These high-speed, high density optical modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm.
Avago’s MiniPOD solution offers system designers two module package options to optimize their cable management and board layout. AFBR-814RxyZ Tx/AFBR-824RxyZ Rx is used with round multi-lane cable assemblies for applications requiring multiple turns of the jumper cable inside the chassis. AFBR-814FxyZ Tx/AFBR-824FxyZ Rx is used with flat ribbon cable assemblies, allowing dense tiling of the modules as the jumper cables can be thread under the dust-cap of the next module. This top mounted optical connection maximizes board layout density by eliminating board space lost to the optical connector and strain relief.
The electrical interface uses a 9×9 MEG-Array connector with 1.27 mm pitch
The optical interface requires the user to provide a custom designed optical turn 1×12 ribbon cable PRIZM® LightTurn® connector.
The thermal interface provided can require either a user provided heat sink or use of the Avago general purpose clip on heat sink, to maintain the module case temperature to be between 0°C to 70°C during continuous operation.
规格:
操作电压:2.5V & 3.3V | |
---|---|
逻辑介面:TWS | |
电源(瓦数):3.7W | |
资料速率:12x12.5 GBd | |
产品类别:MTPR/MPO | |
光纤样式:Multimode Glass | |
最远距离(M):150 | |
标称光波长 (nm):850 | |
发射器:VCSEL |