兼容光模块
AFBR-83PDZ
Description
AFBR-83PDZ
The Avago Technologies AFBR-83PDZ is a Twelve-Channel, Pluggable, Parallel, Fiber-Optic CXP Transceiver for 100 Gigabit Ethernet (100GbE) and 12 x 10G InfiniBand (IB) quadruple data rate (IB-QDR) applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications. It integrates twelve data lanes in each direction with greater than 120 Gbps aggregate bandwidth. Each lane can operate at 10.3125 Gbps up to 100 m using OM3 fiber and 150m using OM4 fiber. These modules are backward compatible to the 12 x 5G IB dual data rate (IB-DDR) and 12 x 2.5G IB single data rate (IB-SDR) applications.
These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. The electrical interface uses an 84-contact edge type connector. The optical interface uses a 24-fiber MTP (MPO) connector. This module incorporates Avago Technologies proven integrated circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
特征描述：
符合 SFF-8642 迷你多通道系列带遮蔽集成连接器和 IBTA Annex A6 CXP 接口标准要求
- 12 个通道的每一个都符合 IEEE 802.3ba 100GbE (100GBASE-SR10 和 CPPI) 标准电气和光学规格要求并支持 InfiniBand QBR/DDR/SDR 应用
- 1Gbps 到 10.5Gbps 多速率工作
- 高通道容量：单一模块超过 120Gbps，双向，12 个独立发射器和接收器
- 使用 64b/66b 编码每通道速度 10.3125Gbps 适合 100GbE 应用，使用 8b/10b 编码每通道速度 10Gbps 适合 IBQDR 应用
- 可热插拔
- 使用 OM3 光纤连接距离达到 100 米，OM4 光纤达到 150 米
- 0 ~ 70°C 外壳操作温度范围
- 仅需 3.3V 电源电压
- < 3W 低功耗
- 经证实高可靠 850nm 技术：使用 Avago VCSEL 阵列发射器和 PIN 阵列接收器
- 带可屏蔽中断的双线串行 (TWS, Two Wire Serial) 接口提供功能扩展包括：单独通道功能：通道禁用、静噪禁用以及通道极性反转
- A/D 读回：模块温度和电源电压、单通道激光电流和激光功率以及输入接收功率
- 通道状态：Tx 错误、电气 (发射器) 或光学 (接收器) LOS 以及警示标
- 使用标准 24 通道光纤搭配 MTP (MPO) 光学连接器带来高密度和轻薄光缆管理
| 操作电压： | 2.5V & 3.3V |
|---|---|
| 资料速率： | 12x10 GBd |
| 产品类别： | MTPR/MPO |
| 光纤样式： | Multimode Glass |
| 最远距离(M)： | 100 |
| 标称光波长 (nm)： | 850 |
| 发射器： | VCSEL Array |
Related Products
AFBR-83EDxxZ
AFBR-83EDxxZ
The Avago AFBR-83EDxxZ is a pluggable 10-channel, parallel optics CXP Active Optical Cable (AOC) for multi-channel 10Gbps proprietary interconnect and 100 Gigabit Ethernet (100GbE) applications.
The AFBR-83EDxxZ is designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. The electrical interface uses an 84-contact edge type connector. The AOC incorporates Avago Technologies' proven integrated circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
AFBR-83CDxxZ
AFBR-83CDxxZ
AFBR-79Q2EKZ
AFBR-8420EVK
AFBR-8420EVK
The Avago AFBR-8420EVK evaluation kit is designed to provide designers with a convenient means of evaluating Avago 100G CFP2 SR10 module. The evaluation kit supports the Avago AFBR-8420Z, a 10-channel pluggable, multi-mode parallel optic transceiver module for high-density 100G Ethernet and Optical Transport Network (OTN) applications.
SFP Extender Board
SFP Extender Board
The SFP extender board was designed to access SFP low speed control signals while a DUT SFP compliant to SFF-8074 is plugged into the target application system such as a network switch and router.