标准光模块
BIDI-1.25G-SFP-10-BD
Description
Product Description
BIDI-1.25G-SFP-10-BD is Multi-Vendor MSA Compatible SFP (Small Form factor Pluggable) Transceiver, operating over Single Fiber Single-Mode Fiber (SMF) optical cable. It has minimum guaranteed optical budget of 12 dB, with in most cases is enough to reach about 10 km distance. However, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. This transceiver use top quality DFB Laser transmitter with operating at nominal wavelength 1550 nm. and 1310 nm. PIN Photodiode receiver. It support DDM/DOM optical diagnostics, with provide diagnostic information about the present operating conditions. BIDI-1.25G-SFP-10-BD operates in Standard 0°-70°C temperature range and has Single LC interface. SFP support 1.063-1.25Gbps data rate and such applications as Gigabit Ethernet (1.25 Gbps)|1G Fiber Channel (1.0625 Gbps). BIDI-1.25G-SFP-10-BD SFP Single Fiber optical transceiver is multi-purpose module used in number of different places of today’s networking. Consequently, most popular applications are Internet Service Provider (ISP) Gigabit Ethernet communication links, Enterprice LAN & SAN Networks, Data Center LAN & SAN Networks and other optical links.
Transceiver is CE/RoHS certified and it is Compliant with product safety standards. BIDI-1.25G-SFP-10-BD SFP Transceiver is fully compliant to SFP Multi Source Agreement INF-8074i. Consequently, it means that module is compatible with 80% of networking equipment, where is not implemented a special algorithm for protection against third party modules. However – we can provide SFP transceiver with custom-encoded firmware in order to make it work almost in any equipment. Therefore, we will be glad to know what your requirement is. Because our focus is providing top quality service, we are performing serious quality checks before delivery of our products. As a result, we do optical parameter measurements, connector cleanness tests and SFP transceiver EEPROM memory data validation tests.
| Media Type: |
Single-Mode Fiber (SMF) |
|---|---|
| TX Wavelength: |
1550 nm. |
| RX Wavelenght: |
1310 nm. |
| Minimum Optical Budget: |
12 dB |
| Maximum Distance: |
10km |
| Supported Data Rate: |
1.063-1.25Gbps |
| Supported Applications: |
Gigabit Ethernet (1.25 Gbps), 1G Fiber Channel (1.0625 Gbps) |
| DDM/DOM: |
Support |
| Temperature Range: |
Standard 0°-70°C |
| Connectors: |
Single LC |
| Tx Wavelength Bandwidth: |
40 nm (1530-1570 nm) |
| Rx Wavelength Bandwidth: |
40 nm (1290-1330 nm) |
| Minimum Transmitting Power: |
-10 dB |
| Maximum Transmitting Power: |
3 dB |
| Receiver Sensitivity: |
-22 dBm |
| Receiver Overload: |
-3 dBm |
| Dispersion: |
200-300 ps/nm |
| Transmitter Type: |
DFB Laser |
| Receiver Type: |
PIN photodiode |
| Power: |
+3.3V single power supply |
| Chipset: |
MAXIM, MINDSPEED, SEMTECH |
| Compliance: |
CE, Class 1 FDA and IEC60825-1 Laser Safety Compliant, INF-8074i, RoHS, SFP MSA |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
2.67G-SFP-2D
2.67G-SFP-2D
2.67G-SFP-2D is Multi-Vendor MSA Compatible SFP (Small Form factor Pluggable) Transceiver, operating over Double Fiber Single-Mode Fiber (SMF) optical cable. It has minimum guaranteed optical budget of 8.5 dB, with in most cases is enough to reach about 2 km distance. However, distance is just indicative parameter calculated for comfort of identification.
2.67G-SFP-300D
2.67G-SFP-300D
2.67G-SFP-300D is Multi-Vendor MSA Compatible SFP (Small Form factor Pluggable) Transceiver, operating over Double Fiber Multi-Mode Fiber (MMF) optical cable. It has minimum guaranteed optical budget of 7.5 dB, with in most cases is enough to reach about 300 m distance. However, distance is just indicative parameter calculated for comfort of identification.
2.67G-SFP-40D
2.67G-SFP-40D
2.67G-SFP-40D is Multi-Vendor MSA Compatible SFP (Small Form factor Pluggable) Transceiver, operating over Double Fiber Single-Mode Fiber (SMF) optical cable. It has minimum guaranteed optical budget of 18 dB, with in most cases is enough to reach about 40 km distance.
2.67G-SFP-41D
2.67G-SFP-41D
2.67G-SFP-41D is Multi-Vendor MSA Compatible SFP (Small Form factor Pluggable) Transceiver, operating over Double Fiber Single-Mode Fiber (SMF) optical cable. It has minimum guaranteed optical budget of 18 dB, with in most cases is enough to reach about 40 km distance.
2.67G-SFP-80D
2.67G-SFP-80D
2.67G-SFP-80D is Multi-Vendor MSA Compatible SFP (Small Form factor Pluggable) Transceiver, operating over Double Fiber Single-Mode Fiber (SMF) optical cable. It has minimum guaranteed optical budget of 26 dB, with in most cases is enough to reach about 80 km distance.
BIDI-1.25G-SFP-10-AD
BIDI-1.25G-SFP-10-AD
BIDI-1.25G-SFP-10-AD is Multi-Vendor MSA Compatible SFP (Small Form factor Pluggable) Transceiver, operating over Single Fiber Single-Mode Fiber (SMF) optical cable. It has minimum guaranteed optical budget of 12 dB, with in most cases is enough to reach about 10 km distance.