标准光模块
CFP4-100G-SR4
Specifications
- 产品型号: CFP4-100G-SR4
- 兼容品牌: 全系列
- 封装类型: CFP4
- 传输速率: 100G SR4 OM3 70m, OM4 100m CFP4 Optical Transceiver
- 传输距离: Maximum link length of 100m on OM4 Multimode Fiber (MMF)
- 发射波长: 4x25Gb/s 850mm VCSEL-based transmitter
- 接收波长: PIN Photo detector
- 工作温度: 商业级0℃～+70℃/工业级-40℃～+85℃ 可选
- 数字诊断: 带DDM
- 接收灵敏度: 100G SR4 OM3 70m, OM4 100m CFP4 Optical Transceiver
- 接收灵敏度: 100G SR4 OM3 70m, OM4 100m CFP4 Optical Transceiver
Description
CFP4-100G-SR4 Optical Transceiver
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
CFP2-100G-LR4
10km OTU4/100G Ethernet CFP2 Optical Transceiver Module (CFP2-100G-LR4),F-tone’s CFP2-100G-LR4 100G CFP2 transceiver modules are designed for use in 100 Gigabit Ethernet and 4x28G OTN client interfaces over single mode fiber. They are compliant with the CFP MSA, IEEE 802.3ba 100GBASE-LR4 and OTU4 4I1-9D1F requirements specified in ITU-T Recommendations G.959.1/G.709 and Supplement 39 (G.sup39).
100G CFP2 LR4
CFP2 LR4,100G CFP2 LR4:The CFP2-1310-LR4 is a fully integrated 100Gbit/s optical transceiver module that consists of a 1310 nm wavelength cooled EA-DFB LD, Driver IC, PIN photo-diode, pre-amplifier, dual clock and data recovery (CDR) ICs with 25 Gbit/s electrical interface which complies with CFP2 Multiple Source Agreement (MSA) specifications.
CFP4-100G-LR4-1310NM
CFP4 LR4,CFP4-100G-LR4-1310NM is a fully integrated 100Gbit/s optical transceiver module that consists of a 1310 nm wavelength cooled EA-DFB LD, Driver IC, PIN photo-diode, pre-amplifier, dual clock and data recovery (CDR) ICs with 25 Gbit/s electrical interface which complies with CFP2 Multiple Source Agreement (MSA) specifications. This compact size transceiver module is 50% smaller than F-tone Networks’s first generation CFP solution.
100GBASE-LR4 10km CFP4 Optical Transceiver
100GBASE-LR4 10km CFP4 Optical Transceiver：F-tone Networks's CFP4-100G-LR4 100G CFP4 optical transceiver modules are designed for use in 100 Gigabit Ethernet interfaces over single mode fiber. They are compliant with the CFP MSA and IEEE 802.3ba 100GBASE-LR4. Digital diagnostics functions are available via the MDIO interface, as specified by the CFP MSA and F-tone Networks Application Note FTAN-2015xx. The transceiver is RoHS-6 compliant and lead-free per Directive 2002/95/EC, and F-tone Networks Application Note FTAN-201538.
OTN Multirate 10km CFP4 Optical Transceiver
OTN Multirate 10km CFP4 Optical Transceiver：F-tone Netsworks’s Fiber 100G CFP4 transceiver modules are designed for use in 100 Gigabit Ethernet and 4x28G OTN client interfaces over single mode fiber. They are compliant with the CFP MSA, IEEE 802.3ba 100GBASE-LR4 and OTU4 4I1-9D1F requirements specified in ITU-T Recommendations G.959.1/G.709 and Supplement 39 (G.sup39). Digital diagnostics functions are available via the MDIO interface, as specified by the CFP MSA and F-tone Netsworks Application Note FTAN2015xx. The transceiver is RoHS-6 compliant and lead-free per Directive 2002/95/EC, and F-tone Netsworks Application Note FTAN201538.
100G CFP to QSFP28 Adapter
100G CFP to QSFP28 Adapter：北亿纤通100G CFP to 100G QSFP28 Adapter转接器实现CFP接口（10X10Gbps）与QSFP28接口（4X25Gbps）双向转换，满足IEEE 802.3ba 100GBASE-LR4和IEEE 802.3bm 100GBASE-SR4协议，最大功耗低于4W，支持前向纠错编码（FEC）、数字诊断（DDM）功能。为100G以太网和电信网提供高性能、热插拔互联方案。 经验证，采用100m OM4多模光纤进行传输，该模块实测功耗低于2.3W，并成功实现4小时连续工作零误码。