Product Description
DWDM-16GFC-SFP-20-18 is Multi-Vendor MSA Compatible SFP+ (Small Form factor Pluggable) Transceiver, operating over Double Fiber DWDM Single-Mode Fiber (SMF) optical cable. It has minimum guaranteed optical budget of 11 dB, with in most cases is enough to reach about 20 km distance. However, distance is just indicative parameter calculated for comfort of identification. Eventually we calculate distance taking in account minimal optical budget and average attenuation of optical cabling in industry. This transceiver use top quality EML Laser transmitter with operating at nominal wavelength Ch. 18 (1563.05 nm) and ITU-T DWDM Grid 100 GHz C-Band PIN Photodiode receiver. It support DDM/DOM optical diagnostics, with provide diagnostic information about the present operating conditions. DWDM-16GFC-SFP-20-18 operates in Standard 0°-70°C temperature range and has Double LC interface. SFP+ support 4.25-14.025 Gbps data rate and such applications as 16G FC (14.025Gbps)|8G FC (8.5 Gbps)|4G FC (4.25 Gbps). DWDM-16GFC-SFP-20-18 SFP+ Double Fiber DWDM optical transceiver is multi-purpose module used in number of different places of today’s networking. Consequently, most popular applications are T11 Fibre Channel infrastructure, SAN Networking backwards compatible with 8G and 4G Fibre Channel, and other optical links.
Transceiver is CE/RoHS certified and it is Compliant with product safety standards. DWDM-16GFC-SFP-20-18 SFP+ Transceiver is fully compliant to SFP+ Multi Source Agreement SFF-8431. Consequently, it means that module is compatible with 80% of networking equipment, where is not implemented a special algorithm for protection against third party modules.
Media Type: |
Single-Mode Fiber (SMF) |
---|---|
TX Wavelength: |
Ch. 18 (1563.05 nm) |
RX Wavelenght: |
ITU-T DWDM Grid 100 GHz C-Band |
Minimum Optical Budget: |
11 dB |
Maximum Distance: |
20km |
Supported Data Rate: |
4.25-14.025 Gbps |
Supported Applications: |
16G Fiber Channel (14.025Gbps), 8G Fiber Channel (8.5 Gbps), 4G Fiber Channel (4.25 Gbps) |
DDM/DOM: |
Support |
Temperature Range: |
Standard 0°-70°C |
Connectors: |
Double LC |
Tx Wavelength Bandwidth: |
100GHz (0.8nm) |
Rx Wavelength Bandwidth: |
1260 – 1620 nm |
Minimum Transmitting Power: |
-2 dB |
Maximum Transmitting Power: |
2 dB |
Receiver Sensitivity: |
-13 dBm |
Receiver Overload: |
2 dBm |
Dispersion: |
To Be Updated |
Transmitter Type: |
EML Laser |
Receiver Type: |
PIN photodiode |
Power: |
+3.3V single power supply |
Chipset: |
Sumitomo |
Compliance: |
CE, Class 1 FDA and IEC60825-1 Laser Safety Compliant, FC-PI-5 Rev 6.00, RoHS, SFF-8431, SFP MSA |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.