标准光模块
DWDM XFP 120KM
Specifications
- 产品型号: FTCX-DXX1X-120X
- 兼容品牌: 全系列
- 封装类型: XFP
- 传输速率: 10G
- 传输距离: 120KM
- 发射波长: DWDM
- 接收波长: DWDM
- 工作温度: 商业级0℃～+70℃/工业级-40℃～+85℃ 可选
- 数字诊断: 带DDM
- 接收灵敏度: 120KM
- 接收灵敏度: 120KM
Description
120km DWDM XFP Optical Transceiver
Features
- Wavelength selectable to C-band ITU-T grid wavelengths
- Suitable for use in 100GHz channel spacing DWDM systems
- XFP MSA Rev 4.5 Compliant
- Data rate from 9.95Gbps to 11.3Gbps
- Cooled EML and APD receiver
- link length up to 120km (with amplifier)
- Low Power Dissipation 3.5W Maximum
- XFI and lineside loopback Mode Supported
- Operating Case Temperature 0°C to 70°C(Standard), -40°C to 85°C
- Diagnostic Performance Monitoring of module temperature,Supply Voltages, laser bias current, transmit optical power, and receive optical power
- RoHS compliant (lead free)
Applications
- SONET OC-192&SDH STM 64
- Ethernet (10GBASE and 10GBASE with FEC)
- DWDM Networks
Description
F-tone 120km XFP Transceiver exhibits excellent wavelength stability, supporting operation at 100 GHz channel, cost effective module. It is designed for 10G SDH/SONET and 10G Ethernet applications.
The transmitter section incorporates a colded EML laser, and the receiver section consists of a APD photodiode integrated with a TIA, Integrated low power dual CDR with Electronic Dispersion Compensation
(EDC). This module can be used to compensate channel impairments caused by either single mode fiber up to 120 km .All modules satisfy class I laser safety requirements. F-tone XFP transceiver provides an enhanced monitoring interface, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage.
Transmitter Specifications – Optical
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
|
Center Wavelength-Start of Life [1] |
lc |
lc -25 |
lc |
lc +25 |
pm |
|
Center Wavelength-End of life [1] |
lc |
lc -100 |
lc |
lc+100 |
pm |
|
Optical Transmit Power |
Po |
-2 |
- |
+2 |
dBm |
|
Optical Transmit Power (disabled) |
PTX_DIS |
- |
- |
-30 |
dBm |
|
Extinction Ratio |
ER |
9 |
- |
- |
dB |
|
Jitter Generation(P-P) |
JG P-P |
- |
- |
0.1 |
UI |
|
Jitter Generation(RMS) |
JG RMS |
- |
- |
0.01 |
UI |
|
Spectral Width (-20dB) |
Δλ20 |
- |
0.3 |
nm |
|
|
Side Mode Suppression Ratio |
SMSR |
30 |
- |
- |
dB |
|
Dispersion penalty(2400ps/nm) [2] |
DP |
- |
- |
2 |
dB |
|
Relative Intensity Noise |
RIN |
- |
- |
-130 |
dB/Hz |
|
Eye Mask |
Compliant with ITU-T G.691 STM-64 eye mask |
||||
Note：
- Wavelength stability is achieved within 60 seconds (max) of power up.
- BER=10^-12; PRBS 2^31-1@9.95Gbps
Receiver Specifications – Optical
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
|||
|
Maximum Input Power |
RX-overload |
-7 |
- |
- |
dBm |
|||
|
Input Operating Wavelength |
λ |
1528 |
- |
1565 |
nm |
|||
|
Reflectance |
Rrx |
- |
- |
-27 |
dB |
|||
|
Loss of Signal Asserted |
LOS_A |
-34 |
- |
- |
dBm |
|||
|
LOS De-Asserted |
LOS_D |
- |
- |
-24 |
dBm |
|||
|
LOS Hysteresis |
LOS_H |
0.5 |
- |
- |
dB |
|||
|
Receiver Sensitivity |
||||||||
|
Data rate (Gb/s) |
BER |
Dispersion (ps/nm) |
Sensitivity back-to-back at OSNR>30dB (dBm) |
Power Penalty at OSNR>30dB (dB) |
||||
|
9.95 ~10.7 |
1e-12 |
-500 to 2400 |
-24 |
2 |
||||
|
11.1 ~11.3 |
1e-12 |
-500 to 2400 |
-23 |
2 |
||||
|
OSNR Performance |
||||||||
|
Data rate (Gb/s) |
BER |
Dispersion (ps/nm) |
Min OSNR Back-to-back at Power: -7 to -18dBm (dB) |
Max OSNR Penalty at Power:-7 to -18dBm (dB) |
||||
|
9.95 ~10.7 |
1e-12 |
-500 to 2400 |
24 |
4 |
||||
|
11.1 ~11.3 |
1e-4 |
-500 to 2400 |
16 |
4 |
||||
Note：
1. BER=10^-12; PRBS 2^31-1;
订货信息/Ordering information :
| Part No. | Description |
| FTCX-DXX1X-120 | DWDM XFP 120km, XX(X)=differentcablelengths,0°C to 70°C |
| FTCX-DXX1X-120I | DWDM XFP 120km, XX(X)=differentcablelengths, -40°C to 85°C |
相应的传输波长有C-band λc Wavelength Guide
| ITU Channel Product Code | Frequency(THz) | Wavelength | ITU Channel Product Code | Frequency(THz) | Wavelength |
| 17 | 191.7 | 1563.86 | 40 | 194 | 1545.32 |
| 18 | 191.8 | 1563.05 | 41 | 194.1 | 1544.53 |
| 19 | 191.9 | 1562.23 | 42 | 194.2 | 1543.73 |
| 20 | 192 | 1561.42 | 43 | 194.3 | 1542.94 |
| 21 | 192.1 | 1560.61 | 44 | 194.4 | 1542.14 |
| 22 | 192.2 | 1559.79 | 45 | 194.5 | 1541.35 |
| 23 | 192.3 | 1558.98 | 46 | 194.6 | 1540.56 |
| 24 | 192.4 | 1558.17 | 47 | 194.7 | 1539.77 |
| 25 | 192.5 | 1557.36 | 48 | 194.8 | 1538.98 |
| 26 | 192.6 | 1556.55 | 49 | 194.9 | 1538.19 |
| 27 | 192.7 | 1555.75 | 50 | 195 | 1537.4 |
| 28 | 192.8 | 1554.94 | 51 | 195.1 | 1536.61 |
| 29 | 192.9 | 1554.13 | 52 | 195.2 | 1535.82 |
| 30 | 193 | 1553.33 | 53 | 195.3 | 1535.04 |
| 31 | 193.1 | 1552.52 | 54 | 195.4 | 1534.25 |
| 32 | 193.2 | 1551.72 | 55 | 195.5 | 1533.47 |
| 33 | 193.3 | 1550.92 | 56 | 195.6 | 1532.68 |
| 34 | 193.4 | 1550.12 | 57 | 195.7 | 1531.9 |
| 35 | 193.5 | 1549.32 | 58 | 195.8 | 1531.12 |
| 36 | 193.6 | 1548.51 | 59 | 195.9 | 1530.33 |
| 37 | 193.7 | 1547.72 | 60 | 196 | 1529.55 |
| 38 | 193.8 | 1546.92 | 61 | 196.1 | 1528.77 |
| 39 | 193.9 | 1546.12 |
Related Products
XFP-850多模光模块
Supports 9.95Gbps to 10.5Gbps bit rates
Maximum link length of 300m (50um,MMF,2000MHz.Km)
850nm VCSEL laser and PIN receiver
Low power consumption <1.5W
+3.3V +1.8Vpower supply
XFP MSA package with duplex LC connector
XFI electrical interface
No reference clock required
Compatible with RoHS
Excelllent EMI performance
Built-in digital diagnostic functions
Temperature range: 0℃ to +70℃
High reliability
CWDM XFP 10KM
- Supports 9.95Gb/s to 11.1Gb/s bit rates
- Hot-pluggable XFP footprint
- Maximum link length of 10km with SMF
- 4-Wavelengths Uncooled CWDM DFB laser from1270nm to 1330nm, with Step 20nm
- XFP MSA package with duplex LC connector
- No reference clock required
- Compatible with RoHS
- +3.3V power supply
- Power dissipation <2.5W
- Built-in digital diagnostic functions
- Temperature range 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
80KM CWDM XFP
- Wavelength selectable to ITU-T standards covering CWDM grid wavelengths
- XFP MSA Compliant
- data rate from 9.95 Gbps to 11.3Gbps
- No Reference Clock required
- Cold EML transmitter and APD receiver
- 1470nm~1570nm link length up to 80km (1600ps/nm)
- 1590nm~1610nm link length up to 70km (1400ps/nm)
- Low Power Dissipation 3.5W Maximum
- Operating Case Temperature 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- Diagnostic Performance Monitoring of module temperature, supply Voltages, laser bias current, transmit optical power, receive optical power
- RoHS compliant and lead free
CWDM XFP 40KM
- Wavelength selectable to ITU-T standards covering CWDM grid wavelengths
- XFP MSA Compliant
- data rate from 9.95 Gbps to 11.3Gbps
- No Reference Clock required
- Cold EML transmitter and PIN receiver
- link length up to 40km (800ps/nm)
- Low Power Dissipation 3.5W Maximum
- Operating Case Temperature 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- Diagnostic Performance Monitoring of module temperature, supply Voltages, laser bias current, transmit optical power, receive optical power
- RoHS compliant and lead free
DWDM XFP 40KM
- Wavelength selectable to C-band ITU-T grid
- Suitable for use in 100GHz channel spacing DWDM systems
- XFP MSA Compliant
- data rate from 9.95 Gbps to 11.3Gbps
- No Reference Clock required
- Cold Start up Wavelength Compliance
- DWDM-rated EML transmitter and PIN receiver
- link length up to 40km
- Low Power Dissipation 3.5W Maximum
- Operating Case Temperature 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- Diagnostic Performance Monitoring of module temperature, supply Voltages, laser bias current, transmit optical power, receive optical power
- RoHS compliant and lead free
DWDM XFP 80KM
- Wavelength selectable to C-band ITU-T grid
- Suitable for use in 100GHz channel spacing DWDM systems
- XFP MSA Compliant
- data rate from 9.95 Gbps to 11.1Gbps
- No Reference Clock required
- Cold Start up Wavelength Compliance
- DWDM-rated EML transmitter and APD receiver
- link length up to 80km
- Low Power Dissipation 3.5W Maximum
- Operating Case Temperature 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- Diagnostic Performance Monitoring of module temperature, supply Voltages, laser bias current, transmit optical power, receive optical power
- RoHS compliant and lead free