其它产品
非金属野战光缆
Description
非金属野战光缆
产品简介
专门为野战和复杂环境下快速布线或反复收放条件下使用而设计的光缆，重量轻、抗张力大、抗压力强；柔软性好；易弯曲；耐油、耐磨、阻燃；适用温度范围广等特点。适用于军用野外通信系统快速布线或反复收放；雷达、航空和舰船布线；油田、矿山、港口、电视现场转播、通信线路抢修等条件严酷的场合。
产品特点
-
采用紧凑的全介质配线型结构，内为Ф0.9mm紧套光纤，使光缆具有极高的强重比，便于快速布线；
-
复合结构的高强度光纤二次被覆，提供了最好的温度性能和最小的附加衰减，确保光缆在恶劣条件下的可靠性和使用寿命；
-
特制的高强度、柔韧型中心增强元件，保证光缆的强度和弯曲性能；
-
大面积的芳纶增强纤维为光缆提供了极高的机械强度；
-
小节距SZ绞合的紧套光纤和单螺旋绞合的芳纶纤维相组合，保证野战光缆有较大的拉伸应变能力；
-
热塑性聚氨酯弹性体阻燃护套为光缆提供了良好的结构稳定性和抗压、耐磨、耐油、低温柔韧和阻燃等性能
主要应用于
光纤性能
产品参数
配套连接器
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
3/10W 1064nm PM Circulator, CW or Pulsed, 1.0 μm Fiber Laser
3/10W 1064nm PM Circulator, CW or Pulsed, 1.0 μm Fiber Laser
The High Power Polarization Maintaining Circulator is characterized with low insertion loss, high isolation, high power handling, high return loss, and high extinction ratio. It is ideal for fiber laser and instrumentation applications.
2W 1064nm Isolator, CW or Pulsed
2W 1064nm Isolator, CW or Pulsed
The 1064nm High Power Polarization Insensitive Isolator is characterized with low insertion loss, high isolation, high power handling, high return loss, excellent environmental stability and reliability. It is ideal for fiber laser and instrumentation applications.
Unidirectional Integrated Tap Photodiode (UTPD)
Unidirectional Integrated Tap Photodiode (UTPD)
The Unidirectional Integrated Tap Photodiode (UTPD) integrates the functionality of an optical coupler and a photodiode for optical network's power monitoring. The unidirectional feature allows the PD to respond power from input port only. It can be applied for channel power monitoring in DWDM system, optical fiber line auto switch protection equipment (OLP), re-configurable optical add/drop multiplexer (OADM), and gain/attenuation monitoring in EDFA, etc.
Integrated Tap Photodiode Isolator
Integrated Tap Photodiode Isolator
The Integrated Tap Photodiode Isolator (TPDI) integrates the functionality of a miniature polarization insensitive isolator with a tap photodiode for power monitoring in one package. The product provides a more compact solution in EDFA or other modules where both Isolator and monitoring function are needed.
2W 1064nm PM Isolator, CW or Pulsed, 1.0 μm Fiber Laser
2W 1064nm PM Isolator, CW or Pulsed, 1.0 μm Fiber Laser
The 1064nm Polarization Maintaining Isolator is a micro optics device with low insertion loss, high isolation, high return loss, high extinction ratio and excellent environmental stability and reliability. It is ideal for amplifiers, fiber lasers and test instrument applications.
1064nm Isolator PBC/PBS
1064nm Isolator PBC/PBS
The 1064nm Isolator Polarization Beam Combiner/Splitter is a compact device which provides both polarization beam combining and optical isolation function in one integrated device. The most common application is to combine the light of two pump lasers into a single fiber to double the pump power.