100GBASE-SR4 CFP4 Optical Transceiver
● Hot pluggable CFP4 MSA form factor
● Supports 103.1Gb/s to 112.2Gb/s aggregate bit rates
● Compliant to IEEE 802.3bm 100GBASE-SR4
● Power class 2 (<2.5W max)
● Up to70m on OM3 and 100m OM4 MMF transmission
● Up to 28Gb/s data rate per channel
● 4x28G Electrical Serial Interface (CEI-28G-VSR)
● MDIO management interface with digital diagnostic monitoring (Optional)
● Maximum power consumption <2.5W
● Utilizes a standard 12/8 lane optical fiber with MPO connector
● RoHS 6 compliant(lead free)
● 4×28Gb/s 850mm VCSEL-based transmitter
● Case operating temperature
Commercial:0 ~ +70℃
Industrial:-40 ~ +85℃
● 100GBASE-SR4 Ethernet
● OTN OTU4
● 128G Fiber Channel
The F-tone Networks’s100Gb/s transceiver module for optical communication applications compliant to 100GBASE-SR4 of the IEEE P802.3bm standard. The module converts 4 input channels of 25Gb/s electrical data to 4 channels of VCSEL optical signals over 4 multimode fibers for 100Gb/s optical transmission. Reversely, on the receiver side, the module receives 4 channels of VCSEL optical signals over 4 multimode fibers and then converts them to 4 output channels of electrical data.
The high speed VCSEL transmitters and high sensitivity PIN receivers provide superior performance for 100Gigabit Ethernet applications up to 100m links over OM4 multimode fibers and compliant to optical interface with IEEE802.3bm Clause 95 100GBASE-SR4 requirements.
This product contains anMTP/MPO optical connector for the optical interface and a 56-pin connector for the electrical interface. Figure 1 shows the functional block diagram of this product.
FTC4-HG-SR4 |
CFP4-SR4 100m optical transceiver with full real-time digital diagnostic monitoring and pull tab,0ºC ~ +70ºC |
FTC4-HG-SR4I |
CFP4-SR4 100m optical transceiver with full real-time digital diagnostic monitoring and pull tab,-40ºC ~ +85ºC |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must bespecifically confirmed in writing by F-tone before they become applicable to any particular order or contract. In accordance with the F-tone policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone or others. Further details are available from any F-tone sales representative.