标准光模块
100Gbps QSFP28 PSM4 10km Optical Transceiver Module
Description
Description
The F-tone Networks FTQ2-HG-PSMLR4 is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP 28 PSM4 for 100 or 40 Gigabit Ethernet , Infiniband DDR/EDR Applications. This transceiver is a high performance module for data communication and interconnect applications. It integrates four data lanes in each direction with 104 Gbps bandwidth. Each lane can operate at 26Gbps up to 10km over G.652 SMF. These modules are designed to operate over singlemode fiber systems using a nominal wavelength of 1310nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses an 12 fiber MTP (MPO) connector. This module incorporates F-tone Networks proven circuit and Optical technology to provide reliable long life, high performance, and consistent service.
Features
● 4 channels full-duplex transceiver modules
● Transmission data rate up to 26Gbps per channel
● 4 channels 1310nm DFB
● 4 channels PIN photo detector array
● Internal CDR circuits on both receiver and transmitter channels
● Support CDR bypass
● Low power consumption <3.5W
● Hot Pluggable QSFP form factor
● Up to 10km reach for G.652 SMF
● Single male MPO(APC 8-degree) connector receptacle
● Operating case temperature 0°C to +70°C
● 3.3V power supply voltage
● RoHS 6 compliant(lead free)
Applications
● 100G Ethernet links
● Infiniband DDR/EDR
● Datacenter and Enterprise networking
Mechanical Dimensions
Ordering information
|
Part Number |
Product Description |
|
FTQ2-HG-PSMLR4 |
100Gb/s QSFP28 PSM4, MPO Connector, reach 10km on G.652 |
本产品为25G~400G高速光模块系列，如有需要，请联系我们。
注：本产品有全国产化型号可选
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
Multi-rate 100G QSFP28 LR4 Optical Transceiver Module
Multi-rate 100G QSFP28 LR4 Optical Transceiver Module
Description
This product is a 100Gb/s transceiver module designed for optical communication applications compliant to 100GBASE-LR4 of the IEEE P802.3ba standard and OTU4 4I1-9D1F requirements specified in ITU-T Recommendations G.959.1/G.709 and Supplement 39(G.sup39).
100GBASE-LR4 10km QSFP28 Optical Transceiver
100GBASE-LR4 10km QSFP28 Optical Transceiver
Description
The F-tone Networks 100GBASE-LR4 10km QSFP28 optical transceiver (FTQ2-HG-LR4-10xx) is designed for use in 100-Gigabit Ethernet links up to 10km on Single Mode Fiber (SMF). It is compliant with the QSFP28 MSA, IEEE 802.3ba 100GBASE-LR4 and IEEE 802.3bm CAUI-4.
100GBASE-LR4 QSFP28 Optical Transceiver Module(FTQ2-HG-LR4-20xx)
100GBASE-LR4 QSFP28 Optical Transceiver Module(FTQ2-HG-LR4-20xx)
Description
This product is a 100Gb/s transceiver module designed for optical communication applications compliant to 100GBASE-LR4 of the IEEE P802.3ba standard. The module converts 4 input channels of 25Gb/s electrical data to 4 channels of LAN WDM optical signals and then multiplexes them into a single channel for 100Gb/s optical transmission.
100GBASE-LR4 Lite 4km QSFP28 Optical Transceiver
100GBASE-LR4 Lite 4km QSFP28 Optical Transceiver
Description
The F-tone Networks 100GBASE-LR4 Lite 4km QSFP28 optical transceiver, 100G QSFP28 LR4L (FTQ2-HG-LR4Lxx) is designed for use in 100-Gigabit Ethernet links up to 4km on Single Mode Fiber (SMF). It is compliant with the QSFP28 MSA, IEEE 802.3ba 100GBASE-LR4, and IEEE 802.3bm CAUI-4.
100GBASE-LR4 QSFP28 Optical Receiver Module
100GBASE-LR4 QSFP28 Optical Receiver Module
Description
This product is a 100Gb/s receiver module designed for optical communication applications compliant to 100GBASE-LR4 of the IEEE P802.3ba standard and ONT OUT4. The receiver module de-multiplexes a 100Gb/s optical input into 4 channels of LAN WDM optical signals and then converts them to 4 output channels of electrical data.
100Gb/s QSFP28 PSM4 2km Optical Transceiver Module
100Gb/s QSFP28 PSM4 2km Optical Transceiver Module
Description
The F-tone Networks FTQ2-HG-PSMIR4xx is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP 28 PSM4 for 100 or 40 Gigabit Ethernet , Infiniband DDR/EDR Applications. This transceiver is a high performance module for data communication and interconnect applications.