800G DR8+ OSFP Optical Transceiver

Product Description
F-tone Networks’s OSFP transceiver module is designed for use in 800 Gigabit Ethernet links over 2km single mode fiber. The module has 8 independent electrical input/output channels operating up to 106.25Gbps per channel. This transceiver consists of two transmitter/receiver units, with each operating on a set of wavelengths on the ITU G.694.2 CWDM grid at 1310nm. The transmitter path of the module incorporates a bi-directional PAM4 re-timer ASIC integrated with Silicon Photonics Laser and two 4-channel modulator driver. On the receiver path, used 8 photodiodes and two 4-channel TIA arrays, along with the PAM4 re-timer.

Features
● 0 to 2km over SMF with KP4 FEC supported at the Host side
● MPO-16 connector
● Triple Rate operation:
         106.25Gbps (PAM4)
         53.125Gbps (PAM4)
         26.5625Gbps (NRZ)
● Silicon Photonics 1310nm transmitter
● PIN and TIA array on the receiver side
● Power dissipation < 18W
● Case temperature range: 0°C to 70°C(commercial)
● Safety Certification: TUV/UL/FDA
● RoHS Compliant

Applications
● 8x100G Ethernet
● 2x400G Ethernet
● 1x800G Ethernet
● 2x200G Ethernet

本产品为FT-AM系列，仅展示部分参数，如有需要，请联系我们。
注：本产品有全国产化型号可选
Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.