标准光模块
工业级DWDM SFP+万兆光模块（40km）
Description
工业级DWDM SFP+万兆光模块（40km）
北亿纤通（F-tone Networks）的工业级DWDM SFP+万兆光收发模块用于数据中心万兆以太网和5G前传CPRI/eCPRI链路,通过单模光纤（SMF）传输距离最高可达40千米。
特征:
▪ 采用可热插拔的SFP+封装
▪ 全双工收发一体模块
▪ 制冷型CWDM EML发射器和APD接收器
▪ 接收和发射通道内置CDR电路
▪ 符合SFP+ MSA、万兆以太网和CPRI标准
▪ 最大速率高达10.3125Gbps
▪ 可选波长:1470nm-1610nm（间隔20nm）
▪ 通过单模光纤传输距离最高可达40千米
▪ 最大功耗小于1.8W
▪ 双工LC光口
▪ 内置数字诊断接口
▪ 工作温度范围从-40到+85摄氏度
▪ 电源电压3.3V
▪ 符合RoHS环保标准（无铅）
应用:
▪ 数据中心万兆以太网
▪ 5G前传CPRI/eCPRI
Related Products
DWDM SFP+ 10G 40KM
- Compliant with SFF-8431 and IEE802.3ae
- Suitable for use in 100GHz channel spacing DWDM systems
- Data rate selectable ≤4.25Gbps or 9.95Gbps to 10.3Gbps bit rates
- Cooled EML transmitter and PIN receiver
- link length up to 40km
- Low Power Dissipation 1.5W Maximum
- Operating Case Temperature:Standard : 0 to +70°C / Industrial : -40 to +85°C
- Single 3.3V power supply
- Diagnostic Performance Monitoring of module temperature, supplyVoltages, laser bias current, transmit optical power, receive optical power
- RoHS compliant and lead free
DWDM SFP+ 10G 80KM
- Compliant with SFF-8431 and IEE802.3ae
- Suitable for use in 100GHz channel spacing DWDM systems
- Data rate selectable ≤4.25Gbps or 9.95Gbps to 10.3Gbps bit rates
- Cooled EML transmitter and PIN receiver
- link length up to 80km
- Low Power Dissipation 1.5W Maximum
- Operating Case Temperature:Standard : 0 to +70°C / Industrial : -40 to +85°C
- Single 3.3V power supply
- Diagnostic Performance Monitoring of module temperature, supplyVoltages, laser bias current, transmit optical power, receive optical power
- RoHS compliant and lead free
50GHz DWDM SFP+
- SFP+ Single-Mode for DWDM Application
- Duplex SFP+ Transceiver
- Digital Diagnostic Function
- RoHS6 Compliant
- Available in all C-Band Wavelengths on the 50GHz
- DWDM ITU Grid
- Temperature-Stabilized DWDM EML Transmitter
- Duplex LC Connector
- Power Dissipation ＜1.5W
- Dispersion tolerance from -300ps/nm to 800ps/nm
- Hot-Pluggable SFP+ Footprint
- Compliant with SFF-8431 MSA
- Compliant with SFF-8432 MSA
- Operating Case Temperature:0°C to 70°C(Standard), -40°C to 85°C (Industrial)
80km Multi-Rate SFP+ Transceiver
F-tone's SFP-10G-80KM tranceivers are Enhanced Small Form Factor Pluggable SFP+ transceivers designed for use in 10-Gigabit multi-rate links up to 80km of G.652 single mode fiber. They are compliant with SFF-8431, SFF-8432 and G.959.1 P1L1-2D2, and support SONET OC-192, SDH STM-64, 10G Ethernet ZR and 10G Fibre Channel. F-tone's SFP-10G-80KM transceivers use internal clock and data recovery (CDR) IC's for the transmitter and the receiver.
Tunable DWDM SFP+ Transceiver
F-tone tunable SFP+ transceiver is fully compliant to SFP+ MSA. It supports 50GHz DWDM 10Gb/s SONET/SDH, 10 Gigabit Ethernet, and 10 Gigabit Fibre Channel applications over fiber without dispersion compensation. Digital diagnostics functions are available via a 2-wire serial interface, as specified in the SFP+ MSA and SFF 8472 MSA.
工业级CWDM SFP+万兆光模块（40km）
工业级CWDM SFP+万兆光模块（40km）
北亿纤通（F-tone Networks）的工业级CWDM SFP+万兆光收发模块用于数据中心万兆以太网和5G前传CPRI/eCPRI链路,通过单模光纤（SMF）传输距离最高可达40千米。