其它产品
Isolator/Filter WDM Hybird (980/1550)
Description
Isolator/Filter WDM Hybird (980/1550)
The 980/1550 IWDM series combines Filter WDM and isolator into a compact package to offer cost saving solution. This device is ideal for fiber amplifier application to combine signal and pump wavelengths with very stable 1550 nm signal isolation. It is designed according to Telcordia standard and capable of high power handling.
|
Specifications |
|||
|
Parameter |
Unit |
Single Stage |
Dual Stage |
|
Pass Band Signal Wavelength Range |
nm |
1530 - 1580 |
|
|
Max. Insertion Loss |
dB |
0.8 |
1.0 |
|
Typ. Insertion Loss |
dB |
0.6 |
0.8 |
|
Typ. Peak of Signal Isolation |
dB |
40 |
55 |
|
Min. Signal Isolation (1550 ± 10 nm for single |
dB |
30 |
45 |
|
stage, 1550 ± 30 nm for dual stage, 23 ℃) |
|||
|
Max. Polarization Dependent Loss |
dB |
0.1 |
0.15 |
|
Max. Polarization Mode Dispersion |
ps |
0.25 |
0.05 |
|
Reflection Band Wavelength Range |
nm |
950 - 1010 |
|
|
Max. Insertion Loss |
dB |
0.6 |
|
|
Typ. Insertion Loss |
dB |
0.4 |
|
|
Max. Polarization Dependent Loss |
dB |
0.1 |
|
|
Min. Return Loss |
dB |
50 |
|
|
Thermal Stability |
dB/℃ |
0.005 |
|
|
Max. Optical Power (Continuous Wave) |
mW |
300 |
|
|
Max. Tensile Load |
N |
5 |
|
|
Fiber Type |
SMF-28 fiber for Pass Port |
||
|
HI 1060 fiber for Reflect and Common Ports |
|||
|
Operating Temperature |
℃ |
-5 to +70 |
|
|
Storage Temperature |
℃ |
-40 to +85 |
|
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
3/10W 1064nm PM Circulator, CW or Pulsed, 1.0 μm Fiber Laser
3/10W 1064nm PM Circulator, CW or Pulsed, 1.0 μm Fiber Laser
The High Power Polarization Maintaining Circulator is characterized with low insertion loss, high isolation, high power handling, high return loss, and high extinction ratio. It is ideal for fiber laser and instrumentation applications.
2W 1064nm Isolator, CW or Pulsed
2W 1064nm Isolator, CW or Pulsed
The 1064nm High Power Polarization Insensitive Isolator is characterized with low insertion loss, high isolation, high power handling, high return loss, excellent environmental stability and reliability. It is ideal for fiber laser and instrumentation applications.
Dense Wavelength Division Multiplexers Module (4/8/16 Channels) (DWDMM Series)
Dense Wavelength Division Multiplexers Module (4/8/16 Channels) (DWDMM Series)
The multi-channel Dense Wavelength Division Multiplexer Module is based on thin film DWDM devices by cascading individual channels into sequence. Channel numbers can be as high as 40 (16) for 100 (200) GHz systems in C band or in L band. They are featured with wide passband, low insertion loss, high channel isolation and high environmental stability. They can be used in dense WDM systems to perform mutiplexing or demutiplexing function.
Coarse Wavelength Division Multiplexers Module (4 Channels/8 Channels) (CWDMM Series)
Coarse Wavelength Division Multiplexers Module (4 Channels/8 Channels) (CWDMM Series)
The Coarse WDM Module is expanding the bandwidth of Metro/Access Networks. The 4 channel and 8 channel CWDM modules are based on Coarse Wavelength Division Multiplexer devices. They can act as MUX/DEMUX with 20 nm channel spacing. It has low insertion loss, low PDL, high isolation and good thermal stability.
Coarse Wavelength Division Multiplexers (CWDM Series ), Filter Component
Coarse Wavelength Division Multiplexers (CWDM Series ), Filter Component
The Coarse Wavelength Division Multiplexer series is designed and manufactured to Telcordia standard. The devices use environmentally stable thin film filter and advanced packaging technology to achieve wide passband, low insertion loss, high channel isolation and excellent environmental stability. They can be used individually to perform single channel add or drop function or can be cascaded into sequence for multi-channel applications in CWDM systems.
PM Filter Tap Isolator
PM Filter Tap Isolator
The Polarization Maintaining Tap Isolator combines a tap coupler and polarization sensitive/insensitive isolator into a single compact package. It has high extinction ratio and very low insertion loss. The component is ideal for fiber amplifier and fiber optic system where signal monitoring is required.