兼容光模块
SFF-8074
Description
SFF-8074
The SFP extender board was designed to access SFP low speed control signals while a DUT SFP compliant to SFF-8074 is plugged into the target application system such as a network switch and router. TX & RX high speed signals are routed on the board with 50 ohm transmission lines to maintain signal integrity. The extender board is a useful tool for trouble shooting any problems associated with SFP’s running in systems. This SFP extender board is not intended for SFP+use however, it can still be used to monitor SFP+ low speed control signals.
Related Products
AFBR-83PDxxZ
AFBR-83PDxxZ
AFBR-2CARxxZ
AFBR-2CARxxZ
The Avago AFBR-2CARxxZ Active Optical Cable (AOC) is part of a family of SFP+ products to serve 10Gb Ethernet (10GbE) applications. The letters “xx” of the part number AFBR-2CARxxZ denote the cable length in meters. The AFBR-2CARxxZ enables 10GbE equipment designs with very high port density based on the electrical and mechanical specification enhancements to the well known SFP specifications developed by the SFF committee. The specifications are referred to as “SFP+” to represent the enhancements over previous SFP specifications. The SFP+ AOCs have a cable length up to 20m. These AOCs can be used as an alternative solution to SFP+ passive and active copper cables, while providing improved signal integrity, longer reach, superior electromagnetic immunity and better bit error rate performance
AFBR-83EDxxZ
AFBR-83EDxxZ
The Avago AFBR-83EDxxZ is a pluggable 10-channel, parallel optics CXP Active Optical Cable (AOC) for multi-channel 10Gbps proprietary interconnect and 100 Gigabit Ethernet (100GbE) applications.
The AFBR-83EDxxZ is designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. The electrical interface uses an 84-contact edge type connector. The AOC incorporates Avago Technologies' proven integrated circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
AFBR-83CDxxZ
AFBR-83CDxxZ
AFBR-79Q2EKZ
AFBR-8420EVK
AFBR-8420EVK
The Avago AFBR-8420EVK evaluation kit is designed to provide designers with a convenient means of evaluating Avago 100G CFP2 SR10 module. The evaluation kit supports the Avago AFBR-8420Z, a 10-channel pluggable, multi-mode parallel optic transceiver module for high-density 100G Ethernet and Optical Transport Network (OTN) applications.