标准光模块
SFP+ DAC Twinax Cable, SFP+ Direct Attach Copper Cable, Passive 3~7 meter
Description
Description
SFP+ DAC (Direct Attach Copper) passive twinax cable is suitable for very short distances transmission and offers a highly cost-effective and low power solution to connect within racks and across adjacent racks. SFP+ twinax passive cable allows for a serial data transmission up to 10.3Gb/s, which is a low cost choice for very short reach applications of 10GbE or 1-8G Fiber Channel. SFP+ DAC which replaces two optical modules and a connectorized optical fiber with a twinaxial copper cable assembly offers the higher density, lower cost, and lower power 10 Gigabit Ethernet solution than other cable types such as 10GBASE-CX4 and CAT6/CAT6A 10GBASE-T. AWG(American wire gauge), decreasing gauge numbers denote Increasing wire diameters, the transmission will be more longer, 24AWG for 3~7 meters application.
Notice: 1. When link "Intel NIC" with over 3 meters SFP+ DAC Passive, you need to choose 24AWG, otherwise there will exist instability (1 or 2 meters, 30AWG is ok). 2. When link "Cisco switch" with 5 meters SFP+ DAC Passive, you could also choose 30AWG to save cost (because Cisco has enough compensation in the switch’s chipset ). 3. When link "Aruba (HP Provurve) switch"，the hardware is different with others. 4. The compatible for "Brocade CNA", please choice the Active SFP+ DAC.
- 10GBase-CU
- SFP+ to SFP+ Connetor
- 2-pair differential twinax cable
- Impedance: 100-ohm
- EEPROM I2C (MCU: customized)
- Compliant to SFP MSA
- Low power consumption
- Excellent EMI performance
- RoHS Compliant
- Temp. Range(℃): 0~70 (Industrial Temp.: customized)
- 1-8G Fiber Channel
- 1-10G Gigabit Ethernet
- Networking, Storage, Telecommunications
- Hub, Switches, Routers, Servers, Network Interface Card(NICs)
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
10G SFP+ LR Transceiver
10G SFP+ LR Transceiver
FT-MTRS-02X13-Gis a high performance, cost effective modules, which is supporting Multi Rate 2.5-10.3125Gbps, and transmission distance up to 10km on SM fiber. The transceiver consists of two sections: The transmitter section incorporates a 1310nm DFB driver.
6G 2km SFP+ Transceiver
6G 2km SFP+ Transceiver
FT-MTRS-6E21-01is a high performance, cost effective modules, which is supporting Multi Rate 1.25-6.25Gbps, and transmission distance up to 2km on SM fiber. The transceiver consists of two sections: The transmitter section incorporates a 1310nm FP Laser and a driver.
XG PON N1 OLT XFP Transceiver
XG PON N1 OLT XFP Transceiver
The F-tone NetworksFT-PLGX1-01A transceiver consists 1577nm DFB EML laser, 1270nm APD photodiode WDM filter and Preamplifier in a high-integrated optical sub-assembly for 2.5G upstream and 10G downstream GPON applications up to 20km.
XGPON ONU SFP+ Transceiver
XGPON ONU SFP+ Transceiver
The F-tone NetworksFT-PNGS1-01A transceiver consists 1270nm DFB laser, 1577nm APD photodiode WDM filter and Preamplifier in a high-integrated optical sub-assembly for 2.5G upstream and 10G downstream XGPON applications up to 20km.
FDR 56GBASE-SR4 QSFP+ Transceiver for MMF, 150M
FDR 56GBASE-SR4 QSFP+ Transceiver for MMF, 150M
F-tone Networks’s FT-77-AMQ14-SR4-M1 Modules are designed for use in Ethernet, SAS, and Infiniband links over multimode fiber. They are compliant with the QSFP+ MSA and the Ethernet, SAS and InfiniBand architecture specifications.
SFP+ DAC Twinax Cable,SFP+ Direct Attach Copper Cable,0.5~3 meter,Passive,30AWG
SFP+ DAC Twinax Cable,SFP+ Direct Attach Copper Cable,0.5~3 meter,Passive,30AWG
SFP+ DAC (Direct Attach Copper) passive twinax cable is suitable for very short distances transmission and offers a highly cost-effective and low power solution to connect within racks and across adjacent racks.