The FT-BE-F7226 is intended for the XGS-PON OLT duplex optical transceiver module designed for low cost point-to-multipoint (P2MP) Fiber to the Home (FTTH), Business or Curb (FTTx) applications. It employs a 1577nm CW mode downlink EML operating at 9.953Gb/s and a 1270nm APD/TIA burst mode uplink receiver operating at 9.953Gbps and 2.488Gb/s. It is housed in a rugged die cast SFP+ package and is designed to operate over the commercial temperature range of 0 to 70°C. The transceiver requires a 3.3V power supply for operation. The laser transmitter can be controlled by the LVTTL Tx_Disable function, and the optical receiver incorporates LVTTL Rx_SD output.
It is FDA 21CFR1040.10 and IEC 60825-2 Class I laser safety compliant and meets the EEC Directive 2002/95/EC for RoHS compliance. The Transceiver is ESD safe when tested according to IEC61000-4-2. The device complies with (US) FCC Class A, (Europe) CE Class A.
Part Number | Package | Interface | Reach | Temp | Fiber Type | Wavelength | Rate | Tx Output | Rx Input |
---|---|---|---|---|---|---|---|---|---|
FT-BE-F7226B-BC+ FT-BE-F7226B-BH+ FT-BE-F7226B-BCA+ FT-BE-F7226B-BHA+ |
SFP+ | SC | 20km | C, H | 2~5dBm 2~5dBm 4~7dBm 4~7dBm |
-26dBm -26dBm -28dBm -28dBm |
Features
● Dual Wavelength Bidirectional Transceiver
● Signal Fiber needed
● 2x10 SFP+ Die Cast Housing
● SC Optical Interface
● Optical Transmitter
3.3V DC Power Supply
● Low Power Consumption
● 9.953Gb/s Tx CW Mode Data Rate
● 1577nm CW Mode EML
● Optical Receiver
9.953Gb/s Rx Burst Mode Data Rate
● 2.488Gb/s Rx Burst Mode Data Rate
● 1270nm Burst Mode APD/TIA Receiver
● Case Operating Temperature Range:
● Commercial: 0 to 70ºC
● Monitor and Control Functions
● Tx_DISABLE LVTTL
● I2C Serial Clock Input LVTTL
● I2C Bidirectional Serial Data LVTTL
● Rx_SD LVTTL
● Trigger for Digital RSSI LVTTL
● RoHS Compliance
注:本产品有全国产化型号可选
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative