Single-Mode, 800G, QSFP-DD800 With AOC interface

Product Description
F-tone Networks’s QSFP-DD800 AOC is designed for use in 800 Gigabit Ethernet links up to 30m. Each of AOC modules consists of 8 independent electrical input/output channels which can converts 106.25Gbps (PAM4) electrical input data to 8 channels of 106.25Gbps (PAM4) parallel optical signals, and also converts 8 channels of parallel optical signals of 106.25Gbps (PAM4) for each channel into 8 channels of 106.25Gbps (PAM4) electrical output data. The module incorporates 8 parallel channels on 1310nm center wavelength, operating at 106.25G per channel. The electrical interface of the module is compliant with the 800GAUI-8 interface as defined by IEEE 802.3ck, and the form factor, optical/electrical connection and digital diagnostic interface compliant with QSFP-DD800 MSA.

Features
● Supports 850Gbps
● Single 3.3V Power Supply
● Power Dissipation < 16 W
● Up to 30m over SMF with KP4 FEC supported at the Host side
● QSFP-DD MSA Compliant
● 8x53.125GBd(PAM4) Electrical Interface
● Commercial Case Temperature Range of 0°C to 70°C
● PIN and TIA array on the receiver side
● I2C interface with Integrated Digital Diagnostic Monitoring
● Safety Certification: TUV/UL/FDA
● RoHS Compliant

Applications
● 8x100G Ethernet
● 2x400G Ethernet
● 1x800G Ethernet

本产品为FT-AM系列，仅展示部分参数，如有需要，请联系我们。
注：本产品有全国产化型号可选

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.