标准光模块
Tunable 1.2GHz XFP-RF Transmitter
Specifications
- 产品型号: Tunable 1.2GHz XFP-RF Transmitter
- 兼容品牌: 全系列
- 封装类型: XFP
- 传输速率: All-Digital QAM loading from 50 MHz to 1.2 GHz
- 传输距离: Link distance up to 60 kilometers without any dispersion compensation
- 发射波长: Wavelength can be tuned across the entire C-band at 100GHz ITU DWDM spacings
- 接收波长: Wavelength can be tuned across the entire C-band at 100GHz ITU DWDM spacings
- 工作温度: 商业级0℃～+70℃/工业级-40℃～+85℃ 可选
- 数字诊断: Tunable 1.2GHz XFP-RF Transmitter
- 接收灵敏度: Link distance up to 60 kilometers without any dispersion compensation
- 接收灵敏度: Link distance up to 60 kilometers without any dispersion compensation
Description
Tunable DWDM 1.2GHz XFP-RF Transmitter
F-tone Networks’s XFP-RF transmitter is a small form factor hot-pluggable optical module that is compliant with interface specifications developed by the Society of Cable Telecommunications Engineers (SCTE). The wavelength of the transmitter can be electronically set to any of 43 DWDM wavelengths across the entire C-band in less than 0.5 second. An integrated wavelength locker keeps the wavelength within 2 GHz of the wavelength center over the life of the transmitter. It can be fully loaded with digital QAM channels from 50 MHz to 1218 MHz to enable cable operators to more effectively segment their serving groups and offer more services to their subscribers. The small XFP module significantly reduces power consumption and increases density for downstream transmitters. These modules can be integrated into today’s Hybrid-Fiber Coaxial (HFC) optical broadband platforms and tomorrow’s converged
access platforms (CCAP).
Features
- DOCSIS 3.1 compatible: All-Digital QAM loading from 50 MHz to 1.2 GHz
- Wavelength can be tuned across the entire C-band at 100GHz ITU DWDM spacings
- Packaged in standard XFP pluggable optical module
- Built-in digital diagnostic functions
- Link distance up to 60 kilometers without any dispersion compensation
- LC Angled-Physical Contact (APC) optical connection for low reflection
- Low power consumption
- Compliant with SCTE 195 2013: Interface Specifications for an RF-Modulated Small Form Factor Pluggable Optical Module
- Mechanical dimensions compliant with 10 Gigabit Small Form Factor Pluggable Module (XFP) Multi-Source Agreement (INF-8077i, Rev. 4.5)
Applications
- Hybrid Fiber Coaxial Systems, DOCSIS 3.1, RF-over-Glass, RF Video Overlay for PON
Related Products
3G ROF射频光模块
0.01-3 GHz Wideband;Wide Dynamic Range;1310 /1550 nm/CWDM/DWDM/ Option;Integrated Automatic Power Control;Variety of RF and Optical Interfaces;D-9 Monitoring Connector;Available with integrated Low Noise Amplifier;Customization Available;Satellite Signal Backhaul;Analog Signal Distribution;Wireless Antenna Remote;Phase Array Radar;Secure Communications;Radio over Fiber
18GHz ROF射频光模块
18GHz ROF射频光模块:0.01-18 GHz Ultra Wide Bandwidth; Power DFB laser;High speed Modulation;1310 /1550 nm/DWDM Option;Integrated Automatic Power Control;Variety of RF and Optical Interfaces;D-9 Monitoring Connector;Internal TX/RX Pre-Amplifier available;Customization Available;Remote Monitoring and Alarm;Variety of RF and Optical Connectors;DAS System Solutions;Optional Rack-Mount or Outdoor Solutions
DC 0～10Mbps微型RS光模块
FTRS-1300-10xx双纤双向超短型DC～10Mbps光收发模块
特性描述
- 更紧凑的结构设计——模块高度仅12mm
- 适应于高速信号完整性的表贴I/O引脚
- 全金属外壳
- 军品级温度范围，采用抗振动设计
- 仅使用+3.3 V/+5V单电源
- LC接口形式
应用
- 控制信号的光纤传送
- 光纤通道
FTRS-1300-10xx型双纤双向超短型光收发模块将发送和接收部分封装在一个小尺寸金属壳体内，增强了模块抗电磁干扰能力。光发射部分采用LD,发送信号引脚TD,接口电平标准为TTL/LVTTL。光接收部分包括探测器，跨阻放大器和比较器，接收信号引脚RD，接口电平为TTL/LVTTL。模块经过严格的军品级筛选及环境试验，保证了模块的可靠性和环境适应性，具有抗振动、抗电磁干扰、耐湿热、温度适应性强等特点，广泛适用于机载、舰载、高海拔等环境。模块体积小，重量轻，全金属结构，高度仅12mm，易于安装在空间狭小的插板或机箱内。
3GHz XFP-RF光发射模块
3GHz XFP-RF Optical Transmitter
Features
- Low power consumption
- XFP form factor
- DOCSIS3.1 compatible
- SCTE 195 2013 compatible
- Double Optical Isolator
- LC/APC optical connection
- Fiber link up to 60km
- Excellent EMI/EMC design
Transmitter
- Automatic optical power control
- Operating frequency from 100MHz to 3GHz
- Operating Case Temperature
Standard : 0 to +70°C
Industrial : -40 to +85°C
XFP-OA Optical Amplifier
RF-over-Fiber XFP-OA Optical Amplifier
F-tone Networks’s XFP-OA Optical Amplifier is an Erbium-Doped Fiber Amplifier (EDFA) in a small form factor hot-pluggable optical module. It amplifies optical signals to enable long Hybrid Fiber Coaxial links and/or high optical splitting for RF-over-Glass architectures. The optical output power, which is settable by the user, is kept constant through an active feedback loop.
The XFP-OA can be paired with F-tone Networks’s wavelength-tunable XFP-RF Transmitters for single wavelength applications or Dense Wavelength Division Multiplexing (DWDM) up to 8 wavelengths. It installs into the same F-tone Networks XFP-RF host system so it can be monitored and controlled through embedded Web Browser Graphical User Interface or through a network management system.
Tunable 3GHz XFP-RF Transmitter
Tunable DWDM 3GHz XFP-RF Transmitter
F-tone Networks’s 3GHz XFP-RF transmitter is a small form factor hot-pluggable optical module that is compliant with interface specifications developed by the Society of Cable Telecommunications Engineers (SCTE). The wavelength of the transmitter can be electronically set to any of 43 DWDM wavelengths across the entire C-band in less than 0.5 second. An integrated wavelength locker keeps the wavelength within 2GHz of the wavelength center over the life of the transmitter. It can be fully loaded with analog carriers from 50 MHz to 3000 MHz in order to enable operators to effectively utilize a broad range of frequencies when designing distributed antenna systems and RF Over Fiber networks. The small XFP module significantly reduces power consumption and increases density for downstream transmitters.