标准光模块
XGSPON OLT XFP 20km
Description
XGSPON OLT XFP 20km
XGSPON OLT,20km,Tx 1577nm 9.953G,Rx 1270nm 9.953G,XFP外形,SC / UPC插座连接器。 XGSPON标准,XFP型OLT收发器模块（GNTP-27299-XSCD）。
特征:
● 符合ITU-T XGS-PON和G.987.2
● 支持XGSPON 20km应用
● 单纤双向数据链路
● 带EML激光器的1577nm 9.953G连续模式发射器
● 带有APD-TIA的1270nm 9.953G突发模式接收器
● 数字接收信号强度指示（RSSI）
● 带有SC / UPC或SC / APC插座光接口的XFP MSA封装
● 工作温度:0~70°C
● + 3.3V和+ 5V电源
● 符合RoHS-6（无铅）
应用:
● XGSPON OLT
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
0-10Mb/s 多模双纤光收发一体模块
0-10Mb/s 多模双纤光收发一体模块
0-10M/S TTL MULTI-MODE DUPLEX FIBERS OPTICAL TRANSCEIVER
特点:
● SC/FC/ST 或尾纤型光接口,多模双纤收发一体光模块
● +3.3V /+5V 供电
● 接口电平兼容标准 TTL 电平和 CMOS 电平
● 标准 1×9 管脚封装
● 发射器件为 1310nm MQW FP LD 或 850nm VCSEL LD
● 极低功耗设计,满足特殊要求
● 传输速率低至直流,上限速率可选,最高可达 10Mb/s
0-10Mb/s Duplex Fibers SFP Optical Transceiver
0-10Mb/s Duplex Fibers SFP Optical Transceiver
Applications
● Applied to RS232、RS485 optical-electrical converter for electric power control and industrial control with bit rate up to 10Mbps
波长可调SFP+万兆光模块
波长可调SFP+万兆光模块
设计用于10G以太网,OTN OTU2e,10G光纤通道,SONET OC-192和SDH STM-64通过双工单模光纤链路,使用50GHz间隔的C波段可调谐DWDM波长。
波长可调XFP万兆光模块
波长可调XFP万兆光模块
设计用于10G以太网,OTN OTU2e,10G光纤通道,SONET OC-192和SDH STM-64通过双工单模光纤链路,使用50GHz间隔的C波段可调谐DWDM波长。
XGSPON ONU SFP+ 20km
XGSPON ONU SFP+ 20km
XGSPON ONU,20km,Tx 1270nm 9.953G,Rx 1577nm 9.953G,SFP +外形,SC / UPC或SC / APC插座连接器。 XGSPON标准,SFP +型ONU收发器模块（GNUP-2555S-R3CDH,GNUP-2555S-R3TDH,GNUP-2555S-S3CDH和GNUP-2555S-S3TDH）。