Description
FT-MTRQ-4S101 is a Four-Channel,Parallel,Fiber-Optic QSFP28 transceiver for 100G Base-SR4 Ethernet Applications.This transceiver is a high performance module for short-reach muti-lane data communication and interconnect applications.it integrates four data lanes in each direction with 103.125Gbps bandwidth.Each lane can operate 25.78125Gbps up to 70m OM3 or 100m OM4 fiber These module are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector.The optical interface uses an 12 fiber MTP(MPO). connector
A serial EEPROM in the transceiver allows the user to access transceiver monitoring and configuration data via the 2-wire QSFP Management Interface. This interface uses a single address, A0h, with a memory map divided into a lower and upper area.Basic digital diagnostic (DD) data is held in the lower area while specific data is held in a series of tables in the high memory area.
Features
● Support Data Rate 103.125Gbps
● Up to 70m OM3 和 100m OM4
● 4 channels 850nm VCSEL array
● 4 channels PIN photo detector array
● DDM function implemented
● Single MPO connector receptacle
● Hot Pluggable QSFP+ form factor
● Single +3.3V power supply
● Power consumption less than 3.5W
● Operating case temperature: 0〜+70°C
Applications
● 100GBASE-SR4 Ethernet
● Datacom/Telecom switch&router connections
● Data Aggregation and 巳ackplane Applicationgs
● Infiniband transmission at 4ch QDR,FDR and EDR
Compliance
● Compliant with SFF-8636 Rev 2.7
● Compliant with IEEE 802.3bm
● Compliant with IEEE 802.3bj
● Compliant with QSFP+ MSA
● GR-468-CORE
● RoHS compliance
Specification
Absolute Maximum Ratings |
|
|
|
|
Parameter |
Symbol |
Min. |
Max. |
Unit |
Storage Temperature |
TS |
-40 |
+85 |
℃ |
Supply Voltage |
VCC3 |
0 |
3.6 |
V |
Relative Humidity |
RH |
5 |
95 |
% |
Recommended Operating Conditions |
|
|
|
|
|
|
Parameter |
Symbol |
Min. |
Typica● |
Max. |
Unit |
Note |
Operating Case Temperature |
TC |
0 |
|
70 |
℃ |
|
Power Supply Voltage |
VCC3 |
3.13 |
3.3 |
3.47 |
V |
|
ICC3 |
|
|
1008 |
mA |
|
|
Power Dissipation |
PD |
|
|
3.5 |
W |
|
Data Rate |
|
|
103.125 |
|
Gbps |
|
Transmission Distance |
|
|
|
70 |
m |
OM3 |
|
|
|
100 |
m |
OM4 |
Transmitter Optical Characteristic |
|
|
|
|||
Parameter |
Symbol |
Min. |
Typical |
Max. |
Unit |
Note |
Center Wavelength |
λC |
840 |
850 |
860 |
nm |
|
RMS Spectral width |
|
|
|
0.6 |
nm |
|
Optical Power for TX DISABLE |
|
- |
- |
-30 |
dBm |
|
Average launch power, each lane |
P |
-8.4 |
- |
2.4 |
dBm |
|
Optical Modulation Amplitude (OMA), each lane |
OMA |
-6.4 |
|
3 |
|
|
Launch power in OMA minus TDEC |
|
-7.3 |
|
|
|
|
Extinction Ratio |
ER |
2 |
|
|
|
|
Signaling rate, each lane |
|
|
25.78125 |
|
Gbps |
|
Optical eye mask |
|
Compliant with IEEE std 802.3bm-2015 |
|
|
||
Optical Return Loss Tolerance |
|
- |
- |
12 |
dB |
|
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.