标准光模块
10Gb/s SFP+ CWDM 40km 光收发模块（定制款）
Description
10Gb/s SFP+ CWDM 40km 光收发模块
产品描述
FTCS-Cxx1X（1470~1610）-DZxx SFP+光模块设计用于单模光纤上长达40km的万兆以太网链路。该模块由CWDM EML激光器、850nm VCSEL和前置放大器组成一个高度集成的光学子组件。数字诊断功能可通过SFF-8472中规定的2线串行接口获得。
FTCS-Cxx1X（1470~1610）-DZxx光模块提供独特的增强型数字诊断监测接口，可实时访问设备运行参数，如光模块温度、激光偏置电流、传输光功率、接收光功率和光模块电源电压。它还定义了一个复杂的警报和警告标志系统，当特定的操作参数超出工厂设定的正常范围时，该系统会向最终用户发出警报。
SFP+MSA在EEPROM中定义了一个256字节的内存映射，可通过8位地址1010000X（A0h）的2线串行接口进行访问。数字诊断监控接口使用8位地址1010001X（A2h），因此最初定义的序列号存储器映射保持不变。
产品特征
● 高达11.3Gb/s的数据链路
● CWDM EML发射机和VCSEL接收机
● 9/125µm SMF上可达40公里
● 可热插拔SFP+占地面积
● 双工LC/UPC型可插拔光接口
● 符合RoHS-10标准且无铅
● 支持数字诊断监测接口
● 单路+3.3V电源
● 符合SFF+MSA和SFF-8472
● 金属外壳，用于降低EMI
● 满足ESD要求，抗8KV直接接触电压
● 外壳工作温度
工业：-40～+85℃
应用
● 10GBASE-LR/LW和10G以太网
● SDH STM64
● 其他光链路
机械规格（单位：mm）
订购信息
|
产品型号 |
速率 (Gb/s) |
波长 (nm) |
传输距离(km) |
温度范围（级别） |
|
FTCS-Cxx1X(1470~1610)-DZxxI |
10.3125 |
Refer to wavelength selection |
40km SMF |
-40~85 Industrial |
Wavelength Selection: CWDM λ Wavelength Guide Pin Descriptions
|
Wavelength |
xx |
Clasp Color Code |
Wavelength |
xx |
Clasp Color Code |
|
1470 nm |
47 |
Gray |
1550 nm |
55 |
Yellow |
|
1490 nm |
49 |
Purple |
1570 nm |
57 |
Orange |
|
1510 nm |
51 |
Blue |
1590 nm |
59 |
Red |
|
1530 nm |
53 |
Green |
1610 nm |
61 |
Brown |
备注：LOS脚是OMA LOS模式，有信号加载的时候低电压，有光无信号加载或者无光的时候高电压。
注：本产品有全国产化型号可选
本产品为SFP+ CWDM系列光模块，如有需要，请您联系我们。
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
DWDM中长距光模块
DWDM中长距光模块
速率可达10Gb/s，MINISFF、SFP+封装可选| 工业级温度范围，符合RoHS，DWDM 100G ITU GRID C波段波长可选，+3.3V单电源
10.3Gb/s SFP+ Transceiver,850nm
10.3Gb/s SFP+ Transceiver,850nm
F-tone Networks's FTCP-851X-02D Small Form Factor Pluggable (SFP+) transceivers are compatible with SFF-8431,SFF-8432 and support 10G Ethernet SR and 10G Fibre Channel .It is designed for use in 10G-Gigabit multi-rate links up to 300m of OM3 . Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.
10Gb/s SFP+ 850nm Optical Transceiver Module
10Gb/s SFP+ 850nm Optical Transceiver Module
Description
FTCS-C85xx1X-DZxx SFP+ transceiver is designed for use in 10-Gigabit Ethernet links up to 300m over Multi-mode fiber. The module consists of 850nm VCSEL Laser, 1310nm PIN and Preamplifier in a high-integrated optical sub-assembly. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.
10Gb/s SFP+ CWDM 10km Optical Transceiver Module
10Gb/s SFP+ CWDM 10km Optical Transceiver Module
Description
FTCS-Cxx1X-DZ01I SFP+ transceiver is designed for use in 10-Gigabit Ethernet links up to 10km over single mode fiber. The module consists of CWDM DFB Laser, 850nm VCSEL and Preamplifier in a high-integrated optical sub-assembly. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.
10Gb/s SFP+ CWDM 10km 光模块（1270~1450）
10Gb/s SFP+ CWDM 10km 光模块
Description
FTCS-Cxx1X(1270~1450)-DZxx SFP+ transceiver is designed for use in 10-Gigabit Ethernet links up to 10km over single mode fiber. The module consists of CWDM DFB Laser, 850nm VCSEL and Preamplifier in a high-integrated optical sub-assembly.
10Gb/s SFP+ CWDM 10km 光模块（定制款军品级）
10Gb/s SFP+ CWDM 10km 光模块（定制款军品级）
产品描述
FTCS-C371X-DZM-210726 SFP+光模块设计用于单模光纤上长达10km的万兆以太网链路。该模块由CWDM DFB激光器、PIN和前置放大器组成一个高度集成的光学子组件。数字诊断功能可通过SFF-8472中规定的2线串行接口获得。