标准光模块
10Gbps 300m SFP+ Optical Transceiver
Description
10Gbps 300m SFP+ Optical Transceiver
Features
● Optical interface compliant to IEEE 802.3ae 10GBASE-SR
● Electrical interface compliant to SFF-8431
● Hot Pluggable
● Supports rate up to 10.3 Gb/s bit rates
● 1G/2G/4G/ 8G/10G Fiber Channel applications.
● 850nm VCSEL transmitter, PIN photo-detector
● Maximum link length of 300m on 2000MHz/km MMF
● Low power consumption
● All-metal housing for superior EMI performance
● Advanced firmware allow customer system encryption information to be stored in transceiver
● Cost effective SFP+ solution, enables higher port densities and greater bandwidth
● For the OBSAI application, the rates are 6.144Gb/s, 3.072 Gb/s, 1.536 Gb/s and 0.768 Gb/s.
● For the CPRI application, the rates are 6.144Gb/s, 3.072 Gb/s, 2.4576 Gb/s, 1.2288 Gb/s, 0.6144 Gb/s.
● RoHS6 compliant (lead free)
● Operating case temperature:
Standard : 0 to +70°C
Industrial : -40 to +85°C
Applications
● 10GBASE-SR at 10.3125Gbps
● 10GBASE-SW at 9.953Gbps
● Other optical links
● For the OBSAI application, the rates are 6.144Gb/s, 3.072 Gb/s, 1.536 Gb/s and 0.768 Gb/s.
● For the CPRI application, the rates are 6.144Gb/s, 3.072 Gb/s, 2.4576 Gb/s, 1.2288 Gb/s, 0.6144 Gb/s.
Mechanical Dimensions
Part Number Ordering Information
|
Part Number |
Product Description |
|
FTCS-851X-02D |
850nm, 10Gbps, SFP+ 300m, 0ºC ~ +70ºC |
|
FTCS-851X-02DI |
850nm, 10Gbps, SFP+ 300m, -40 to +85°C |
注：本产品有全国产化型号可选
本产品为SFP+系列光模块，如有需要，请联系我们。
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
10G-BASE-T Copper SFP+ Transceiver
10G-BASE-T Copper SFP+ Transceiver
Description
F-tone Networks’s FTCS-10G-Txx-M Copper Small Form Pluggable Plus (SFP+) transceivers is high performance, cost effective module compliant with the 10 Gigabit Ethernet and 10G BASE-T standards as specified in IEEE 802. 3-2015 and IEEE 802.3an, which supporting 10Gbps data-rate up to 30 meters reach over shielded twisted-pair category 6A cable.
10Gbps 2km SFP+ Optical Transceiver
10Gbps 2km SFP+ Optical Transceiver
Product description
This 1310 nm FP 10Gigabit SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 2km.The SFP+ 2km module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential.
10Gb/s SFP+ 1310nm 10km Optical Transceiver Module
10Gb/s SFP+ 1310nm 10km Optical Transceiver Module
Description
F-tone Networks’FTCS-131X-10Dxx SFP+ transceiver is designed for use in 10-Gigabit Ethernet links up to 10km over single mode fiber. The module consists of 1310 DFB Laser, PIN and Preamplifier in a high-integrated optical sub-assembly. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.
10Gbps 20km SFP+ Optical Transceiver
10Gbps 20km SFP+ Optical Transceiver
Product description
This 1310 nm DFB 10Gbps SFP+ transceiver is designed to transmit and receive optical data over single mode optical fiber for link length 20km.The SFP+ 20km module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential.
10Gb/s SFP+ 1550nm 80km Optical Transceiver Module
10Gb/s SFP+ 1550nm 80km Optical Transceiver Module
Description
FTCS-151X-80Dxx SFP+ transceiver is designed for use in 10-Gigabit Ethernet links up to 80km over single mode fiber. The module consists of 1550 EML Laser, APD and Preamplifier in a high-integrated optical sub-assembly. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.
10Gb/s SFP+ 1550nm 120km Optical Transceiver Module
10Gb/s SFP+ 1550nm 120km Optical Transceiver Module
Description
F-tone Networks’FTCS-151X-H2Dxx SFP+ transceiver is designed for use in 10-Gigabit Ethernet links up to 120km over single mode fiber. The module consists of 1550 EML Laser, APD and Preamplifier in a high-integrated optical sub-assembly. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.