标准光模块
12GHz High Dynamic Analog Optic Transmitter
Specifications
- 产品型号: 12GHz High Dynamic Analog Optic Transmitter
- 兼容品牌: 全系列
- 封装类型: 12GHz High Dynamic Analog Optic Transmitter
- 传输速率: Wide operating frequency from 100MHz to 12GHz
- 传输距离: 12GHz High Dynamic Analog Optic Transmitter
- 发射波长: 12GHz High Dynamic Analog Optic Transmitter
- 接收波长: 12GHz High Dynamic Analog Optic Transmitter
- 工作温度: 商业级0℃～+70℃/工业级-40℃～+85℃ 可选
- 数字诊断: 12GHz High Dynamic Analog Optic Transmitter
- 接收灵敏度: 12GHz High Dynamic Analog Optic Transmitter
- 接收灵敏度: 12GHz High Dynamic Analog Optic Transmitter
Description
12GHz High Dynamic Analog Optic Transmitter
Features
- Low noise
- Small size
- Flat frequency response
- High dynamic range
- Excellent EMI/EMC design
- Wide operating frequency from 100MHz to 12GHz
- APC&ATC maintain small vibration of output power and IP3
Applications
- Delay line
- Antenna remoting
- Secure communication
- OFDM fiber transmission
- Distributed antenna system
- Wideband wireless communication
Absolute Maximum Ratings
|
Parameter |
Symbol |
Condition |
Min. |
Max. |
Unit |
|
Operating Temperature |
Tc |
-20 |
+50 |
°C |
|
|
Storage Temperature |
Tstg |
-40 |
+85 |
°C |
|
|
DC Operating Voltage |
VD |
-6V@Tx +6V@Rx |
V |
||
|
RF Input Power |
PRF |
20 |
dBm |
||
|
Relative Humidity |
HR |
95 |
% |
||
|
Pressure |
PR |
86 |
106 |
kpa |
|
|
ESD |
Human body model |
Class 1A |
Typical Specification
|
Parameter |
Test Condition |
MIN. |
TYP. |
MAX. |
Unit |
|
Frequency Range |
100M ~ 12G |
Hz |
|||
|
Optical Wavelength |
Transmitter |
optional |
nm |
||
|
Output Optical Power |
+25℃ |
-- |
10 |
-- |
dBm |
|
Gain |
10GHz Tx no Gain, Rx no Gain |
-30 |
-28 |
-- |
dB |
|
Ripple of Passband |
100MHz ~ 6GHz |
-- |
±0.5 |
±2 |
dB |
|
6GHz ~ 12GHz |
-- |
±0.6 |
±2 |
dB |
|
|
Input Return Loss (50 Ω) |
100MHz ~ 12GHz |
-- |
-10 |
-8 |
dB |
|
P-1 |
1GHz |
-- |
18 |
-- |
dBm |
|
SFDR |
1GHz |
110 |
116 |
-- |
dB·Hz2/3 |
|
6GHz |
108 |
113 |
-- |
dB·Hz2/3 |
|
|
12GHz |
104 |
110 |
-- |
dB·Hz2/3 |
|
|
Input IP3 |
1GHz |
30 |
34 |
-- |
dBm |
|
6GHz |
28 |
33 |
-- |
dBm |
|
|
12GHz |
27 |
31 |
-- |
dBm |
|
|
Noise Figure |
1GHz |
-- |
35 |
38 |
dB |
|
6GHz |
-- |
39 |
42 |
dB |
|
|
12GHz |
-- |
41 |
44 |
dB |
|
|
Power Consumption |
+5V, TX no Gain |
-- |
-- |
4.0 |
W |
|
-5V |
-- |
0.35 |
0.5 |
W |
|
|
Operating Voltage |
+5V, -5V |
VDC |
|||
Note: With F-tone Networks Optical Receiver and 1.0 meter SMF-28 single-mode fiber.
Connector
|
Type |
Connector |
|
RF |
K (2.92mm,50Ω) |
|
Optical |
FC/APC |
|
Optical Fiber Type |
SMF-28(Standard) |
|
Power |
EMI Low Pass Filter Feed ThroughCapacitor |
PIN Function
Optical Transmitter
|
PIN |
Name |
Direction |
Note |
|
1 |
POWER |
Ⅰ |
+5V |
|
2 |
POWER |
Ⅰ |
-5V |
|
3 |
GND |
Ⅰ |
GND |
|
4 |
SMA |
Ⅰ |
RF in |
Ordering Information
|
FTRFT |
- |
0 |
X |
N |
xxx |
F |
K |
- |
U |
000 |
|
Transmitter |
Gain N: No Gain |
Laser Wavelength 270：1270nm …………………… 370：1370nm |
Temperature Range U: -20 to 50℃ |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networksbefore they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
3G ROF射频光模块
0.01-3 GHz Wideband;Wide Dynamic Range;1310 /1550 nm/CWDM/DWDM/ Option;Integrated Automatic Power Control;Variety of RF and Optical Interfaces;D-9 Monitoring Connector;Available with integrated Low Noise Amplifier;Customization Available;Satellite Signal Backhaul;Analog Signal Distribution;Wireless Antenna Remote;Phase Array Radar;Secure Communications;Radio over Fiber
XFP-OA Optical Amplifier
RF-over-Fiber XFP-OA Optical Amplifier
F-tone Networks’s XFP-OA Optical Amplifier is an Erbium-Doped Fiber Amplifier (EDFA) in a small form factor hot-pluggable optical module. It amplifies optical signals to enable long Hybrid Fiber Coaxial links and/or high optical splitting for RF-over-Glass architectures. The optical output power, which is settable by the user, is kept constant through an active feedback loop.
The XFP-OA can be paired with F-tone Networks’s wavelength-tunable XFP-RF Transmitters for single wavelength applications or Dense Wavelength Division Multiplexing (DWDM) up to 8 wavelengths. It installs into the same F-tone Networks XFP-RF host system so it can be monitored and controlled through embedded Web Browser Graphical User Interface or through a network management system.
Tunable 3GHz XFP-RF Transmitter
Tunable DWDM 3GHz XFP-RF Transmitter
F-tone Networks’s 3GHz XFP-RF transmitter is a small form factor hot-pluggable optical module that is compliant with interface specifications developed by the Society of Cable Telecommunications Engineers (SCTE). The wavelength of the transmitter can be electronically set to any of 43 DWDM wavelengths across the entire C-band in less than 0.5 second. An integrated wavelength locker keeps the wavelength within 2GHz of the wavelength center over the life of the transmitter. It can be fully loaded with analog carriers from 50 MHz to 3000 MHz in order to enable operators to effectively utilize a broad range of frequencies when designing distributed antenna systems and RF Over Fiber networks. The small XFP module significantly reduces power consumption and increases density for downstream transmitters.
Tunable 1.2GHz XFP-RF Transmitter
Tunable 1.2GHz XFP-RF Transmitter
F-tone Networks’s XFP-RF transmitter is a small form factor hot-pluggable optical module that is compliant with interface specifications developed by the Society of Cable Telecommunications Engineers (SCTE). The wavelength of the transmitter can be electronically set to any of 43 DWDM wavelengths across the entire C-band in less than 0.5 second. An integrated wavelength locker keeps the wavelength within 2 GHz of the wavelength center over the life of the transmitter. It can be fully loaded with digital QAM channels from 50 MHz to 1218 MHz to enable cable operators to more effectively segment their serving groups and offer more services to their subscribers. The small XFP module significantly reduces power consumption and increases density for downstream transmitters. These modules can be integrated into today’s Hybrid-Fiber Coaxial (HFC) optical broadband platforms and tomorrow’s converged
access platforms (CCAP).
20GHz Mini Analog Optic Receiver
20GHz Mini Analog Optic Receiver
Features
- Small size: 19.8*16.0*9.6mm
- High responsivity: ≥0.6 @ 1310nm
≥0.7 @ 1550nm
- Wide operating frequency from 10MHz to 20GHz
- Wide wavelength range from 1260nm to 1620nm
- DC-block and matched to 50 Ohm
Applications
- Antenna remoting
- GPS signal transport
- Wireless signal transport
- Distributed antenna system
- High speed test and measurement
- Video Signal Distribution in HFC and FTTx Nodes
18GHz High Dynamic Analog Optic Transmitter
18GHz High Dynamic Analog Optic Transmitter
Features
- Low noise
- Small size
- Flat frequency response
- High dynamic range
- Excellent EMI/EMC design
- Wide operating frequency from 100MHz to 18GHz
- APC&ATC maintain small vibration of output power and IP3
Applications
- Delay line
- Antenna remoting
- Secure communication
- OFDM fiber transmission
- Distributed antenna system
- Wideband wireless communication