波分复用器
1U机架式50G AWG DWDM(80通道)
Description
80-CH 50G Athermal AWG module in 1U Rackmount
This document presents the generic specification for the 80-channel 50GHz Athermal AWG MUX/DEMUX Rackmount supplied for use in DWDM system.
C-Band
L-Band
C+L-Band
Special
50G
100G
200G
Special
16
32
40
48
Special
Gaussian
Broad Gaussian
Flat Top
Module
Rack
Special
0.5m
1m
1.5m
2m
2.5m
3m
Specify
None
FC/APC
FC/PC
SC/APC
SC/PC
LC/APC
LC/PC
ST/UPC
Specify
H58
C59
H59
C60
Special
This document presents the generic specification for the 80-channel 50GHz Athermal AWG MUX/DEMUX Rackmount supplied for use in DWDM system.
Athermal AWG(AAWG) have equivalent performance to standard Thermal AWG(TAWG) but require no electrical power for stabilization. They can be used as direct replacements for Thin Film Filters(Filter type DWDM module) for cases where no power is available, also suitable for outdoor applications over -30 to +70 degree in access networks. F-tone Networks’s Athermal AWG(AAWG) provide excellent optical performance, high reliability, ease of fiber handling and power saving solution in a compact package. Different input and output fibers, such as SM fibers, MM fibers and PM fiber can be selected to meet different applications. We can just offer 19” 1U rackmount package for 50G AWG products.
The planar DWDM components(Thermal/Athermal AWG) from F-tone Networks Optronics are fully qualified according to Telcordia reliability assurance requirements for fiber optic and opto-electronic components (GR-1221-CORE/UNC, Generic Reliability Assurance Requirements for Fiber Optic Branching Components, and Telcordia TR-NWT-000468, Reliability Assurance Practices for Opto-electronic Devices).
Features
Low Insertion Loss
Established silica-on-silicon
Low PDL
Low chromatic dispersion
Telcordia GR-1221-CORE qualified
工作温度：商业级0℃～+70℃/工业级-40℃～+85℃ 可选
Applications
DWDM transmission
Wavelength Routing
Optical add/drop multiplexing
Performance Specifications(Flattop Thermal AWG)
| Parameter | Specification | |||
| MIN | Typ | Max | ||
| Number of Channels | 80 | |||
| Number Channel Spacing（GHz） | 50 | |||
| Cha. Center Wavelength（nm） | C-Band | |||
| Clear Channel Passband(GHz) | ±6.5 | |||
| Wavelength Stability（nm） | ±0.005 | |||
| -1 dB Channel Bandwidth（nm） | 0.2 | |||
| -3 dB Channel Bandwidth（nm） | 0.3 | |||
| Optical Insertion Loss at ITU grid（dB） | 6.0 | 7.0 | ||
| Isolation（dB） | Adjacent | 25 | ||
| Non-Adjacent | 29 | |||
| Total Channel Isolation | 22 | |||
| Insertion Loss Uniformity（dB） | 2.0 | |||
| Directivity(Mux Only)（dB） | 40 | |||
| Insertion Loss Ripple（dB） | 1.5 | |||
| Optical Return loss（dB） | 40 | |||
| PDL/Polarization Dependent Loss in Clear Channel Band（dB） | 0.3 | 0.5 | ||
| Polarization Mode Dispersion（ps） | 0.5 | |||
| Maximum Optical Power（mW） | 23 | |||
| MUX/DEMUX input/ output Monitoring range(dB/℃) | -35 | +23 | ||
| Operating Temperature(℃) | -5 | +25 | +65 | |
| Operating Humidity(%RH) | 5 | 95 | ||
| Storage Temperature(℃) | -40 | +85 | ||
| Storage Humidity(%RH) | 5 | 95 | ||
| Package Size(ABS Box)(mm) | L150×W65×H16 | |||
| Package Size(1U Rackmount)(mm) | L440×W200×H44 | |||
1、IL Represents the worst case over a +/-0.01nm window around the ITU wavelength;
2、PDL was measured on average polarization over a +/- 0.01nm window around the ITU wavelength.
{loadmodule mod_custom,Important Notice}
Related Products
3port FWDM in 1U Rackmount
3 port FWDM in 1U Rackmount：F-tone Networks' Micro-Optical WDM utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging. It provides low insertion loss, high channel isolation, low temperature sensitivity and epoxy free optical path.
100G密集波分复用器
100G密集波分复用器:密集波分复用器是将不同波长的光信号复用至一根光纤上（复用），或将复用在一根光纤中的多个光信道按波长分开（解复用）．100G信道间隔密集光波分复用器/解复用器采用成熟的多腔介质膜实现光的滤波，波长稳定性好，采用密封工艺封装，环境稳定性高．
200G密集波分复用器
200G密集波分复用器：密集波分复用器是将不同波长的光信号复用至一根光纤上（复用），或将复用在一根光纤中的多个光信道按波长分开（解复用）．200G信道间隔密集光波分复用器/解复用器采用成熟的多腔介质膜实现光的滤波，波长稳定性好，采用密封工艺封装，环境稳定性高.
100G有热AWG（40通道）
100G有热AWG（40通道）：北亿纤通的40通道热AWG 100克是设计用于在C波段DWDM系统的释放。降低设备的功耗在不同的环境条件,TAWG包特别设计选择可靠的低热传导,热塑料和TAWG操作温度控制用箔抵制加热器或珀尔帖TEC热敏电阻温度传感器。不同的输入和输出的纤维,如SM纤维,可以选择下午毫米纤维和纤维来满足不同的应用程序。我们也可以提供不同的产品包,包括特殊的金属盒和19个“1 u架装安装。
100G无热AWG DWDM
北亿纤通专业研发生产100G无热AWG DWDM,100G Athermal AWG DWDM,100G无热AWG DWDM密集波分复用器,100G Athermal AWG DWDM密集波分复用器,工业级100G无热AWG DWDM,工业级100G Athermal AWG DWDM,工业级100G无热AWG DWDM密集波分复用器,工业级100G Athermal AWG DWDM密集波分复用器 ,是一个专业的工业级100G无热AWG DWDM密集波分复用器制造商
50G无热AWG(80通道)
北亿纤通专业研发生产50G无热AWG,50G Athermal AWG DWDM,50G无热AWG DWDM密集波分复用器,50G Athermal AWG DWDM密集波分复用器,50G无热AWG(80通道),50G Athermal AWG DWDM(80通道),50G无热AWG DWDM密集波分复用器(80通道),50G Athermal AWG DWDM密集波分复用器(80通道),工业级50G无热AWG,工业级50G Athermal AWG DWDM,工业级50G无热AWG DWDM密集波分复用器,工业级50G Athermal AWG DWDM密集波分复用器,是一个专业的50G Athermal AWG DWDM密集波分复用器(80通道)制造商