标准光模块
3.3V 1.25Gbps 1X10 MiniSFF Transceiver
Description
3.3V 1.25Gbps 1X10 MiniSFF Transceiver
FEATURES
● Surface mount I/O pins for high speed signal integrity
● All metal body, screw mounting
● Industrial Temp Range, Vibration tolerant design
● 850nm VCSEL Transmitter
● 300 m links with 62.5/125 mm MMF Cables
● 500 m links with 50/125 mm MMF Cables
● Single 3.3V Power Supply
● 2-Fiber MiniSFF LC Transceiver
● Operating Temperature
Standard : 0℃~+70℃ (FTMF-8512-02)
Industrial: -40℃~+85℃ (FTMF-8512-02I)
APPLICATIONS
● SONET/SDH Equipment Interconnect
● Fiber Channel Links
Outline Specification
Recommended PCB Layout
Ordering Information
|
P/No. |
Package
|
Bit Rate (Gb/s) |
Dist. (m) |
Wavelength (nm) |
Volt. (V) |
TX Power (dBm) |
RX Sens (dBm) |
Temp. (℃) |
|
FTMF-8512-02 |
LC |
1.25 |
500 |
850 |
3.3 |
-9~-3 |
-17 |
0~70 |
|
FTMF-8512-02I |
LC |
1.25 |
500 |
850 |
3.3 |
-9~-3 |
-17 |
-40~85 |
注：本产品有全国产化型号可选
本产品为FTMF系列，仅展示部分参数，如有需要，请联系我们。
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
单模双纤双向超短型光模块
单模双纤双向超短型光模块
FTRS-1542-02I型单模双纤双向超短型光收发模块将发送和接收部分封装在一个小尺寸金属壳体内，增强了模块抗电磁干扰能力。光发射部分采用大功率LD，发送信号引脚（TD+和TD-）接口电平标准为CML。
6.25Gbps 双纤双向超短型光模块
6.25Gbps 双纤双向超短型光模块
FTRS-8562-02I型双纤双向超短型光收发一体模块将发送和接收部分封装在一个小尺寸金属壳体内，增强了模块抗电磁干扰能力。光发射部分采用VCSEL激光器，发送信号引脚（TD+和TD-）接口电平标准为CML。
单纤双向表贴型光模块
单纤双向表贴型光模块
FTPI型单纤双向表贴型光收发模块将发送和接收部分封装在一个小尺寸金属壳体内，增强了模块抗电磁干扰能力。光发射部分采用大功率LD，发送信号引脚（TD+和TD-）接口电平标准为CML。
10.3125Gbps 10km 单纤双向FC插拔型光模块
10.3125Gbps 10km 单纤双向FC插拔型光模块
FTFC-Bxx1X-021是单纤双向，接口为标准FC插拔型的超小紧凑型光收发模块，该模块将发送和接收部分封装在一个小尺寸金属壳体内，增强了模块抗电磁干扰能力。光发射部分采用DFB激光器，发送信号引脚（TD+和TD-）接口电平标准为OML。
4.25Gbps SFP Optical Transceiver, 40km Reach
4.25Gbps SFP Optical Transceiver, 40km Reach
Description
The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.
10Gbps MiniSFF LC Transceiver (300m)
10Gbps MiniSFF LC Transceiver (300m)