标准光模块
40GHz射频光模块,40GHz模拟光收发模块
Specifications
- 产品型号: 40GHz射频光模块,40GHz模拟光收发模块
- 兼容品牌: 全系列
- 封装类型: 超宽的工作频率范围：500MHz to 40GHz
- 传输速率: 超宽的工作频率范围：500MHz to 40GHz
- 传输距离: 40GHz射频光模块,40GHz模拟光收发模块
- 发射波长: 40GHz射频光模块,40GHz模拟光收发模块
- 接收波长: 40GHz射频光模块,40GHz模拟光收发模块
- 工作温度: 商业级0℃～+70℃/工业级-40℃～+85℃ 可选
- 数字诊断: 40GHz射频光模块,40GHz模拟光收发模块
- 接收灵敏度: 40GHz射频光模块,40GHz模拟光收发模块
- 接收灵敏度: 40GHz射频光模块,40GHz模拟光收发模块
Description
|
特点 ◆ 低噪声 ◆ 平坦的频率响应 ◆ 大动态范围 ◆ 出色的 EMC/EMI 设计 ◆ 超宽的工作频率范围：500MHzto40GHz ◆ 带有 APC&ATC 电路确保输出光功率和线性随温度极小变化 |
运用 ◆ 天线拉远 ◆ 保密通信 ◆ 光纤延迟线 ◆ 分布式天线系统 ◆ 宽带无线通信 |
最大最小绝对值范围
|
项目 |
符号 |
测试条件 |
最小 |
最大 |
单位 |
|
光发模块工作温度范围 |
Tc |
|
-10 |
+60 |
°C |
|
光发模块存储温度范围 |
Tstg |
|
-40 |
+85 |
°C |
|
光收模块工作温度范围 |
Tc |
|
-55 |
+85 |
°C |
|
光收模块存储温度范围 |
Tstg |
|
-55 |
+85 |
°C |
|
直流工作电压 |
VD |
|
|
+16V@光发模块 +6V@光收模块 |
V |
|
射频输入功率 |
PRF |
|
|
25 |
dBm |
|
相对湿度 |
HR |
|
|
95 |
% |
|
大气压强 |
PR |
|
86 |
106 |
kpa |
|
静电等级 |
|
人体模型 |
|
Class 1A |
典型指标
|
项目 |
测试条件 |
最小 |
典型 |
最大 |
单位 |
|
工作频率范围 |
|
500M ~ 40G |
Hz |
||
|
光波长 |
光发 |
可选 |
nm |
||
|
光收 |
1100~1620 |
||||
|
发射光功率 |
+25℃，Tx |
-- |
7 |
-- |
dBm |
|
增益 (1) |
10GHz |
-30 |
-26 |
-- |
dB |
|
带内波动 |
500MHz ~ 40GHz |
-- |
±4 |
±5 |
dB |
|
回波损耗(50 Ω) |
500MHz ~ 40GHz |
-- |
-10 |
-5 |
dB |
|
输 入 P-1dB |
1GHz |
-- |
22 |
-- |
dBm |
|
SFDR (1) |
20GHz |
100 |
103 |
-- |
|
|
输入三阶交调点(1) |
20GHz |
15 |
18 |
-- |
|
|
噪声系数 (1) |
20GHz |
-- |
35 |
38 |
|
|
功耗 |
+15V,Tx no Gain |
-- |
4 |
10 |
W |
|
+5V, Rx no Gain |
-- |
0.35 |
0.5 |
||
|
工作电压 |
|
TX:+12 ~ +15 RX:+5 |
VDC |
||
说明: 用 1 米光纤进行测试。
接头定义
|
类型 |
接头 |
|
射频接口 |
V 型 母 头 (2.4 mm,50Ω) |
|
光接口 |
FC/APC |
|
光纤类型 |
SMF-28(标准) |
|
供电和告警 |
DB9 母头 |
管脚定义
光发模块
|
引脚 |
名字 |
方向 |
说明 |
|
1 |
POWER |
Ⅰ |
+12 ~ +15V |
|
2 |
POWER |
Ⅰ |
+12 ~ +15V |
|
3 |
GND |
Ⅰ |
电源地 |
|
4 |
GND |
Ⅰ |
电源地 |
|
5 |
LD MON |
O |
光发模块输出光功率监控，输出 0~4V，4V 是最大输出光功率，0V 是输 出光功率为零。 |
|
6 |
LD ALM |
O |
光发模块告警，告警电压为+5V. |
|
7 |
NC |
|
预留 |
|
8 |
NC |
|
预留 |
|
9 |
ENB |
Ⅰ |
控制光模块工作状态，当 VEN ≥ 4.5V，模块打开，并开始工作；当 VEN≤0.5V，模块关闭。 |
光收模块
|
管脚 |
名字 |
方向 |
说明 |
|
1 |
GND |
Ⅰ |
电源地 |
|
2 |
电源 |
Ⅰ |
+5V |
说明: 使用模块时请确保模块已经充分散热。.
订购信息
光发模块
|
FTRFT |
- |
0 |
A |
N |
xxx |
F |
V |
- |
T |
200 |
|
光发模块 |
|
|
|
放大 N: 不带放大 |
发射波长550：1550nm 支持 DWDM |
FC/APC |
V 型 |
|
温度范围 T: -10 to 60℃ |
|
光收模块
|
FTRFR |
- |
0 |
A |
N |
B00 |
F |
V |
- |
P |
000 |
|
光收模块 |
|
|
|
放大 N: 不带放大 |
波长范围 1100nm ~ 1620nm |
FC/APC |
V 型 |
|
温度范围 T: -55 to 70℃ |
|
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
3G ROF射频光模块
0.01-3 GHz Wideband;Wide Dynamic Range;1310 /1550 nm/CWDM/DWDM/ Option;Integrated Automatic Power Control;Variety of RF and Optical Interfaces;D-9 Monitoring Connector;Available with integrated Low Noise Amplifier;Customization Available;Satellite Signal Backhaul;Analog Signal Distribution;Wireless Antenna Remote;Phase Array Radar;Secure Communications;Radio over Fiber
XFP-OA Optical Amplifier
RF-over-Fiber XFP-OA Optical Amplifier
F-tone Networks’s XFP-OA Optical Amplifier is an Erbium-Doped Fiber Amplifier (EDFA) in a small form factor hot-pluggable optical module. It amplifies optical signals to enable long Hybrid Fiber Coaxial links and/or high optical splitting for RF-over-Glass architectures. The optical output power, which is settable by the user, is kept constant through an active feedback loop.
The XFP-OA can be paired with F-tone Networks’s wavelength-tunable XFP-RF Transmitters for single wavelength applications or Dense Wavelength Division Multiplexing (DWDM) up to 8 wavelengths. It installs into the same F-tone Networks XFP-RF host system so it can be monitored and controlled through embedded Web Browser Graphical User Interface or through a network management system.
Tunable 3GHz XFP-RF Transmitter
Tunable DWDM 3GHz XFP-RF Transmitter
F-tone Networks’s 3GHz XFP-RF transmitter is a small form factor hot-pluggable optical module that is compliant with interface specifications developed by the Society of Cable Telecommunications Engineers (SCTE). The wavelength of the transmitter can be electronically set to any of 43 DWDM wavelengths across the entire C-band in less than 0.5 second. An integrated wavelength locker keeps the wavelength within 2GHz of the wavelength center over the life of the transmitter. It can be fully loaded with analog carriers from 50 MHz to 3000 MHz in order to enable operators to effectively utilize a broad range of frequencies when designing distributed antenna systems and RF Over Fiber networks. The small XFP module significantly reduces power consumption and increases density for downstream transmitters.
Tunable 1.2GHz XFP-RF Transmitter
Tunable 1.2GHz XFP-RF Transmitter
F-tone Networks’s XFP-RF transmitter is a small form factor hot-pluggable optical module that is compliant with interface specifications developed by the Society of Cable Telecommunications Engineers (SCTE). The wavelength of the transmitter can be electronically set to any of 43 DWDM wavelengths across the entire C-band in less than 0.5 second. An integrated wavelength locker keeps the wavelength within 2 GHz of the wavelength center over the life of the transmitter. It can be fully loaded with digital QAM channels from 50 MHz to 1218 MHz to enable cable operators to more effectively segment their serving groups and offer more services to their subscribers. The small XFP module significantly reduces power consumption and increases density for downstream transmitters. These modules can be integrated into today’s Hybrid-Fiber Coaxial (HFC) optical broadband platforms and tomorrow’s converged
access platforms (CCAP).
20GHz Mini Analog Optic Receiver
20GHz Mini Analog Optic Receiver
Features
- Small size: 19.8*16.0*9.6mm
- High responsivity: ≥0.6 @ 1310nm
≥0.7 @ 1550nm
- Wide operating frequency from 10MHz to 20GHz
- Wide wavelength range from 1260nm to 1620nm
- DC-block and matched to 50 Ohm
Applications
- Antenna remoting
- GPS signal transport
- Wireless signal transport
- Distributed antenna system
- High speed test and measurement
- Video Signal Distribution in HFC and FTTx Nodes
1.5GHz Mini Analog Optical Transceiver
1.5GHz Mini Analog Optical Transceiver
Features
- Smallsize
- Low powerconsumption
- Flat frequencyresponse
- Excellent EMI/EMCdesign
- High dynamic input and outputrange
- Wide operating frequency from 2MHz to1.5GHz
- APC maintain small vibration of output power and IP3
Applications
- SecureCommunications
- GPS SignalTransport
- Cellular/Wireless SignalTransport
- Analog SignalDistribution
- RF/IF signaldistribution
- Distributed AntennaSystem