标准光模块
50G Ethernet 26.56GBaud 850nm 100m SFP56 Optical Transceiver
Description
The FT-BE-F8011 is SFP56 transceiver. It operates at 26.56GBaud and up to 100m with a 2-fiber duplex LC OM4 multi-mode fiber. It is compliant with SFF-8431、SFF-8432 and SFF-8472.It incorporates the SFP+ MSA LVTTL Loss of Signal (Rx_LOS), Tx Fault (Tx_FAULT), MOD_ABS and Tx Disable (Tx_DIS) monitor and control functions. The differential AC coupled Tx and Rx data interfaces are CML compatible.
| Part Number | Package | Interface | Reach | Temp | Fiber Type | Wavelength | Rate | Tx Output | Rx Input |
|---|---|---|---|---|---|---|---|---|---|
| FT-BE-F8011-BC+ | SFP56 | LC | 100m | C | Multi-mode | 850nm | 50Gb/s | -6.4~4dBm | -8.4~4dBm |
Features
● LC Duplex optical interface
● Reach: max up to 100m on OM4 MMF
● 2x10 SFP+ MSA compliant package
● SFF-8472 Compliance
● High performance 850 nm VCSEL laser
● High sensitivity PIN/TIA optical receiver
● Case Operating temperature range:
● Commercial: 0 to 70ºC
● 2-wire I2C data bus
● RoHS compliance
注：本产品有全国产化型号可选
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
CLASS C++ 2488/1244Mb/s With Digital RSSI SFP GPON OLT Transceiver
CLASS C++ 2488/1244Mb/s With Digital RSSI SFP GPON OLT Transceiver
It is based on the ITU-T G.984.2 Class C+ specifications for bidirectional communications over a single fiber and incorporates a high performance 1310nm Burst Mode APD/TIA receiver and 1490nm CW mode DFB transmitter with internal optical isolator.
25Gb/s 40km SFP28 Optical Transceiver
25Gb/s 40km SFP28 Optical Transceiver
850nm SFP28 Optical Transceiver
850nm SFP28 Optical Transceiver
Fiber Chanel 850nm 2.125/4.25/8.5Gb/s 50m-500m SFP+ Optiaca Transceiver
Fiber Chanel 850nm 2.125/4.25/8.5Gb/s 50m-500m SFP+ Optiaca Transceiver
The FT-BE-F8503 SFP+ triple rate transceiver is intended for up to 500m reach service in 2.125Gb/s to 8.5Gb/s 850nm multi mode, high-speed LAN and SAN data communications equipment where low-cost, extraordinary performance and reliability are essential.
16G Fiber Channel 14.025Gb/s 850nm 100m SFP+ Optical Transceiver
16G Fiber Channel 14.025Gb/s 850nm 100m SFP+ Optical Transceiver
The FT-BE-F8504 SFP+ transceiver is designed for using in Fiber Channel up to 14.025Gb/s over multimode fiber. It is compliant with FC-PI-5 Rev.6.01,SFF-8431 and SFF-8432. It consumes low power, operates from a 3.3V DC power supply and is offered in the commercial temperature range.
32G Fiber Channel 28.05Gb/s 850nm 100m SFP28 Optical Transceiver
32G Fiber Channel 28.05Gb/s 850nm 100m SFP28 Optical Transceiver
The FT-BE-F8508 SFP+ transceiver is designed for using in Fiber Channel links up to 28.05 Gbps data rate over multimode fiber .It consumes low power, operates from a 3.3V DC power supply and is offered in the commercial temperature range.