622Mbps 1x9 SM Transceiver Module
F-tone’s FTTR-1X06X-X series of transceiver modules are the perfect solution for high-speed communication networks.
The transceiver modules support data rates up to 622Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.
The transceiver modules supplies the Differential PECL of3.3V, 5V, 3.3V/5.0V Voltage and provide the system designer with products to implement arange of FDDI and ATM (Asynchronous Transfer Mode) designs at the 622Mbps rateandSONET/OC-12, SDH/STM-4 for Telecommunication.
Business level transceiver module which operating at 0℃ to 70℃ and Industry level which operating extended temperature as -40℃ to +85℃ for available.
— 0°C to +70°C
— -40°C to +85°C for industry level
Operating of the transceiver beyond the Absolute Conditions Listed in Table 1 will degrade or damage the product. It’s not implied that the product would function above the recommended operating environment, it’s possible to reduce the reliability and lifetime of device if Recommended Operating Environment is exceeded (Refer to table 2)
Table 1-- Absolute Maximum Conditions
Parameter |
Symbol |
Min |
Max |
Units |
Storage Temperature |
TST |
-40 |
+85 |
℃ |
Supply Voltage |
VCC |
0 |
+6 |
V |
Relative Humidity |
RH |
5 |
95 |
% |
Lead Soldering Temperature & Time |
- |
- |
260/10 |
℃/S |
Table 2-- Recommended Operating Environment
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Supply Voltage |
3.3V power |
VCC |
3.1 |
3.3 |
3.5 |
V |
5V power |
4.75 |
5.0 |
5.25 |
|||
Ambient operating Temperature |
Commerce level |
TOP |
0 |
+70 |
℃ |
|
Industry level |
-40 |
+85 |
||||
Supply Current |
ITX+IRX |
- |
150 |
200 |
mA |
Table 3 FTTR-1306X-20X Transceiver Optical and Electrical Characteristics
(Ambient Operating Temperature Ta=25°C, VCC= 3.3V)
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
Transmitter |
|||||
Data rate |
B |
622 |
- |
Mb/s |
|
Output Center Wavelength |
λc |
1260 |
1310 |
1360 |
nm |
Output Spectral width (RMS) |
λ |
- |
3.0 |
nm |
|
Average Optical Output Power |
Po |
-14 |
-8 |
-5 |
dBm |
Extinction Ratio |
EXT |
10 |
- |
- |
dB |
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
Receiver |
|||||
Receiver Sensitivity |
PMIN |
- |
-28 |
dBm |
|
Maximum Input Power |
PMAX |
-3 |
- |
dBm |
|
Signal Detect -- Asserted |
PA |
- |
-28 |
dBm |
|
Signal Detect -- Deasserted |
PD |
-38 |
- |
dBm |
|
Signal Detect--Hysteresis |
PHYS |
1.0 |
4.0 |
dB |
Table 4FTTR-1306X-40X Transceiver Optical and Electrical Characteristics
(Ambient Operating Temperature Ta=25°C, VCC= 3.3V)
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
Transmitter |
|||||
Data rate |
B |
- |
622 |
Mb/s |
|
Output Center Wavelength |
λc |
1260 |
1310 |
1360 |
nm |
Output Spectral width (RMS) |
λ |
- |
3.0 |
nm |
|
Average Optical Output Power |
Po |
-8 |
-5 |
-3 |
dBm |
Extinction Ratio |
EXT |
10 |
- |
- |
dB |
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
Receiver |
|||||
Receiver Sensitivity |
PMIN |
- |
-28 |
dBm |
|
Maximum Input Power |
PMAX |
-3 |
- |
dBm |
|
Signal Detect -- Asserted |
PA |
- |
-28 |
dBm |
|
Signal Detect -- Deasserted |
PD |
-38 |
- |
dBm |
|
Signal Detect--Hysteresis |
PHYS |
1.0 |
4.0 |
dB |
Table 5FTTR-1506X-20X Transceiver Optical and Electrical Characteristics
(Ambient Operating Temperature Ta=25°C, VCC= 3.3V)
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
Transmitter |
|||||
Data rate |
B |
622 |
- |
Mb/s |
|
Output Center Wavelength |
λc |
1480 |
1550 |
1580 |
nm |
Output Spectral width (-20dB) |
λ |
- |
1.0 |
nm |
|
Average Optical Output Power |
Po |
-15 |
-10 |
-8 |
dBm |
Extinction Ratio |
EXT |
10 |
- |
- |
dB |
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
Receiver |
|||||
Receiver Sensitivity |
PMIN |
- |
-28 |
dBm |
|
Maximum Input Power |
PMAX |
-3 |
- |
dBm |
|
Signal Detect -- Asserted |
PA |
- |
-28 |
dBm |
|
Signal Detect -- Deasserted |
PD |
-38 |
- |
dBm |
|
Signal Detect--Hysteresis |
PHYS |
1.0 |
4.0 |
dB |
Table 6FTTR-1506X-40X Transceiver Optical and Electrical Characteristics
(Ambient Operating Temperature Ta=25°C, VCC= 3.3V)
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
Transmitter |
|||||
Data rate |
B |
622 |
- |
Mb/s |
|
Output Center Wavelength |
λc |
1480 |
1550 |
1580 |
nm |
Output Spectral width (-20dB) |
λ |
- |
1.0 |
nm |
|
Average Optical Output Power |
Po |
-10 |
-18 |
-5 |
dBm |
Extinction Ratio |
EXT |
10 |
- |
- |
dB |
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
Receiver |
|||||
Receiver Sensitivity |
PMIN |
- |
-28 |
dBm |
|
Maximum Input Power |
PMAX |
-3 |
- |
dBm |
|
Signal Detect -- Asserted |
PA |
- |
-28 |
dBm |
|
Signal Detect -- Deasserted |
PD |
-38 |
- |
dBm |
|
Signal Detect--Hysteresis |
PHYS |
1.0 |
4.0 |
dB |
Table 7FTTR-1506X-60X Transceiver Optical and Electrical Characteristics
(Ambient Operating Temperature Ta=25°C, VCC= 3.3V)
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
Transmitter |
|||||
Data rate |
B |
- |
622 |
Mb/s |
|
Output Center Wavelength |
λc |
1480 |
1550 |
1580 |
nm |
Output Spectral width (-20dB) |
λ |
- |
1.0 |
nm |
|
Average Optical Output Power |
Po |
-8 |
-5 |
-3 |
dBm |
Extinction Ratio |
EXT |
10 |
- |
- |
dB |
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
Receiver |
|||||
Receiver Sensitivity |
PMIN |
- |
-29 |
dBm |
|
Maximum Input Power |
PMAX |
-3 |
- |
dBm |
|
Signal Detect -- Asserted |
PA |
- |
-29 |
dBm |
|
Signal Detect -- Deasserted |
PD |
-38 |
- |
dBm |
|
Signal Detect--Hysteresis |
PHYS |
1.0 |
4.0 |
dB |
Table 8FTTR-1506X-80X Transceiver Optical and Electrical Characteristics
(Ambient Operating Temperature Ta=25°C, VCC= 3.3V)
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
Transmitter |
|||||
Data rate |
B |
- |
622 |
Mb/s |
|
Output Center Wavelength |
λc |
1480 |
1550 |
1580 |
nm |
Output Spectral width (-20dB) |
λ |
- |
1.0 |
nm |
|
Average Optical Output Power |
Po |
-5 |
-3 |
0 |
dBm |
Extinction Ratio |
EXT |
10 |
- |
- |
dB |
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
Receiver |
|||||
Receiver Sensitivity |
PMIN |
- |
-30 |
dBm |
|
Maximum Input Power |
PMAX |
-3 |
- |
dBm |
|
Signal Detect -- Asserted |
PA |
- |
-30 |
dBm |
|
Signal Detect -- Deasserted |
PD |
-40 |
- |
dBm |
|
Signal Detect--Hysteresis |
PHYS |
1.0 |
4.0 |
dB |
Table 9FTTR-1506X-100XTransceiver Optical and Electrical Characteristics
(Ambient Operating Temperature Ta=25°C, VCC= 3.3V)
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
Transmitter |
|||||
Data rate |
B |
- |
622 |
Mb/s |
|
Output Center Wavelength |
λc |
1480 |
1550 |
1580 |
nm |
Output Spectral width (-20dB) |
λ |
- |
1.0 |
nm |
|
Average Optical Output Power |
Po |
0 |
1 |
2 |
dBm |
Extinction Ratio |
EXT |
10 |
- |
- |
dB |
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
Receiver |
|||||
Receiver Sensitivity |
PMIN |
- |
-30 |
dBm |
|
Maximum Input Power |
PMAX |
-3 |
- |
dBm |
|
Signal Detect -- Asserted |
PA |
- |
-32 |
dBm |
|
Signal Detect -- Deasserted |
PD |
-45 |
- |
dBm |
|
Signal Detect--Hysteresis |
PHYS |
1.0 |
4.0 |
dB |
Table 10 (Ambient Operating Temperature Ta=25°C, VCC = 3.3V/5V)
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
Transmitter |
|||||
Data Input Current - High |
IIL |
- |
- |
350 |
μA |
Data Input Voltage - Low |
VIL |
VCC-1.81 |
- |
VCC-1.48 |
V |
Data Input Voltage - High |
VIH |
VCC-1.17 |
- |
VCC-0.88 |
V |
Receiver |
|||||
Data Output Voltage – Low |
VOL |
VCC-1.83 |
- |
VCC-1.56 |
V |
Data Output Voltage – High |
VOH |
VCC-1.09 |
- |
VCC-0.88 |
V |
Signal Detect Output Voltage-Low |
VOL |
VCC-1.83 |
- |
VCC-1.56 |
V |
Signal Detect Output Voltage-High |
VOH |
VCC-1.09 |
- |
VCC-0.88 |
V |
Table11—Connector pin assignment
Pin # |
Pin Name |
Description |
|
1 |
Rx VEE |
Receiver Signal Ground |
|
2 |
RD+ |
Receiver Data Out |
|
3 |
RD- |
Receiver Data Out Bar |
|
4 |
SD |
Signal Detect |
|
5 |
Rx VCC |
Receiver Power Supply |
|
6 |
Tx VCC |
Transmitter Power Supply |
|
7 |
TD- |
Transmitter Data In Bar |
|
8 |
TD+ |
Transmitter Data In |
|
9 |
Tx VEE |
Transmitter Ground |
1X9-3.3V-622M-SM系列 |
||
FTTR-1X06-YYXX |
1x9-3.3V-PECL-(SD PECL)-622M-SC/FC/ST,0 ~ +70°C/-40 ~ +85°C, |
|
FTTR-1X06C-YYXX |
1x9-3.3V-CML-(SD PECL)-622M-SC/FC/ST,0 ~ +70°C/-40 ~ +85°C, |
|
FTTR-1X06L-YYXX |
1x9-3.3V- LVDS-(SD PECL)-622M-SC/FC/ST,0 ~ +70°C/-40 ~ +85°C, |
|
FTTR-1X06T-YYXX |
1x9-3.3V-PECL-(SD TTL)-622M-SC/FC/ST,0 ~ +70°C/-40 ~ +85°C, |
|
FTTR-1X06CT-YYXX |
1x9-3.3V-CML-(SD TTL)-622M-SC/FC/ST,0 ~ +70°C/-40 ~ +85°C, |
|
FTTR-1X06LT-YYXX |
1x9-3.3V- LVDS-(SD TTL)-622M-SC/FC/ST,0 ~ +70°C/-40 ~ +85°C, |
|
1X9-5V-622M-SM系列 |
||
FTTR-1X06H-YYXX |
1x9-5V-PECL-(SD PECL)-622M-SC/FC/ST,0 ~ +70°C/-40 ~ +85°C, |
|
FTTR-1X06HC-YYXX |
1x9-5V-CML-(SD PECL)-622M-SC/FC/ST,0 ~ +70°C/-40 ~ +85°C, |
|
FTTR-1X06HL-YYXX |
1x9-5V- LVDS-(SD PECL)-622M-SC/FC/ST,0 ~ +70°C/-40 ~ +85°C, |
|
FTTR-1X06HT-YYXX |
1x9-5V-PECL-(SD TTL)-622M-SC/FC/ST,0 ~ +70°C/-40 ~ +85°C, |
|
FTTR-1X06HCT-YYXX |
1x9-5V-CML-(SD TTL)-622M-SC/FC/ST,0 ~ +70°C/-40 ~ +85°C, |
|
FTTR-1X06HLT-YYXX |
1x9-5V- LVDS-(SD TTL)-622M-SC/FC/ST,0 ~ +70°C/-40 ~ +85°C, |
|
1X: |
YY: |
XX: |
13: TX1310nm |
0~160KM |
none: SC 0 ~ +70°C |
15: TX1550nm |
I: SC -40 ~ +85°C |
|
F: FC 0 ~ +70°C |
||
FI: FC -40 ~ +85°C |
||
T:ST 0 ~ +70°C |
||
TI: ST -40 ~ +85°C |
Note: Specifications subject to change without notice.