F-tone’sFLTR-8502H-05X series of transceiver modules are the perfect solution for Low-speed communication networks.The transceiver modules support data rates up 2 to 52 Mbps. These modules are fully compliant with the Multi-sourced 1×9 protocol.The transceiver modules suppliesthe TTL interface of 5.0 Voltage and provide the system designer with products to implement arange of low-speed data and digital video transmission designs at the 2 to 52 Mbps rate for fiber communications.Commerce level transceiver module which operating at 0℃ to 70℃.
— 0°C to +70°C
— -40°C to +85°C for industry level
Operating of the transceiver beyond the Absolute Conditions Listed in Table 1 will degrade or damage the product. It’s not implied that the product would function above the recommended operating environment, it’s possible to reduce the reliability and lifetime of device if Recommended Operating Environment is exceeded (Refer to table 2)
Table 1-- Absolute Maximum Conditions
Parameter |
Symbol |
Min |
Max |
Units |
Storage Temperature |
TST |
-40 |
+85 |
℃ |
Operating Temperature |
TOP |
0 |
+70 |
℃ |
Supply Voltage |
VCC |
0 |
+6 |
V |
Relative Humidity |
RH |
5 |
95 |
% |
Lead Soldering Temperature & Time |
- |
- |
260/10 |
℃/S |
Table 2-- Recommended Operating Environment
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
Supply Voltage |
VCC |
4.75 |
5.0 |
5.25 |
V |
Ambient operating Temperature |
TOP |
0 |
- |
+70 |
℃ |
Supply Current |
ITX+IRX |
- |
100 |
150 |
mA |
Table 3 FLTR-8502H-05X Transceiver Optical and Electrical Characteristics
(Ambient Operating Temperature Ta=0°C to +70°C, VCC =4.75V to 5.25V)
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
Transmitter |
|||||
Data rate |
B |
- |
- |
52 |
Mb/s |
Output Center Wavelength |
λC |
830 |
850 |
860 |
nm |
Output Spectral width (RMS) |
λ |
- |
- |
0.85 |
nm |
Average Optical Output Power |
PO |
-15 |
-8 |
-5 |
dBm |
Extinction Ratio |
EXT |
10 |
- |
- |
dB |
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
Receiver |
|||||
Receiver Sensitivity |
PMIN |
- |
- |
-30 |
dBm |
Maximum Input Power |
PMAX |
-3 |
- |
- |
dBm |
Signal Detect -- Asserted |
PA |
- |
- |
-30 |
dBm |
Signal Detect -- Deasserted |
PD |
-42 |
- |
- |
dBm |
Signal Detect - Hysteresis |
PHYS |
1.0 |
- |
4.0 |
dB |
Table 4 (Ambient Operating Temperature Ta=0°C to +70°C, VCC = 4.75V to 5.25V)
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
Transmitter |
|||||
Power Supply Current |
ICC |
- |
- |
50 |
mA |
Data Input Current - Low |
IIL |
-350 |
- |
- |
μA |
Data Input Current - High |
IIL |
- |
- |
350 |
μA |
Data Input Voltage - Low |
VIL |
- |
- |
0.7 |
V |
Data Input Voltage - High |
VIH |
2.0 |
- |
- |
V |
Receiver |
|||||
Power Supply Current |
ICC |
- |
- |
100 |
mA |
Data Output Voltage – Low |
VOL |
- |
- |
0.7 |
V |
Data Output Voltage – High |
VOH |
2.0 |
- |
- |
V |
Signal Detect Output Voltage-Low |
VOL |
- |
- |
0.7 |
V |
Signal Detect Output Voltage-High |
VOH |
2.0 |
- |
V |
Table 5 Connector pin assignment
Pin # |
Pin Name |
Description |
1 |
Rx VEE |
Receiver Signal Ground |
2 |
RD+ |
Receiver Data Out |
3 |
N/C |
N/C |
4 |
SD |
Signal Detect |
5 |
Rx VCC |
Receiver Power Supply |
6 |
Tx VCC |
Transmitter Power Supply |
7 |
N/C |
N/C |
8 |
TD+ |
Transmitter Data In |
9 |
Tx VEE |
Transmitter Ground |
Table 1: Order Information
FLTR-8502H-05 |
1X9,2 ~52 Mbps rate,850(VCSEL),0.5KM,SC, 0°C to +70°C |
FLTR-8502H-05I |
1X9,2 ~52 Mbps rate,850(VCSEL),0.5KM,SC, -40°C to +85°C |
FLTR-8502H-05F |
1X9,2 ~52 Mbps rate,850(VCSEL),0.5KM,FC, 0°C to +70°C |
FLTR-8502H-05FI |
1X9,2 ~52 Mbps rate,850(VCSEL),0.5KM,FC, -40°C to +85°C |
FLTR-8502H-05T |
1X9,2 ~52 Mbps rate,850(VCSEL),0.5KM,ST, 0°C to +70°C |
FLTR-8502H-05TI |
1X9,2 ~52 Mbps rate,850(VCSEL),0.5KM,ST, -40°C to +85°C |
Note: Specifications subject to change without notice.