其它产品
850nm, LC / SC connectorized TOSA component, 10Gbps serial operation
Description
The FT-E6x92-x61 uses a high-performance Vertical Cavity Surface Emitting Laser (VCSEL) designed to meet performance requirements for 10Gbps data communication over multimode optical fiber. Applications include Ethernet, Fibre Channel and ATM protocols. The optical assembly is designed to interface either 50µm or 62.5µm multimode fiber and ensure launch conditioning requirements compatibility with enhanced bandwidth fiber as specified by TIA 455-203.
The FT-E6x92-x61 incorporates a power monitoring photodiode that can be used for temperature compensation, average power control, and for compliance with Class 1 eye safety limits.
Buy Now
一、主要特性
- FT-E6x92-761 normal polarity
- FT-E6x92-861 inverted polarity
- High performance VCSEL
- Low electrical parasitic TO package with flexible interface
- Data rates from DC to 12.5Gbps
- Differential, Cathode or Anode driven versions available
- Complete isolation between the VCSEL, Monitor Photodiode and Case
- Mechanically compatible with all 10Gbps MSAs
二、类型
Type: VCSEL
Data Rate: 10 Gbps
Wavelength: 850nm Band
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
2.5 Gb/s 850nm VCSEL - LC TOSA FT-E419x-441
These products are high radiance VCSELs designed to convert electrical current into optical power that can be used in fiber optic communications and other applications. As the current varies above threshold, the light intensity increases proportionally.
These products are designed to be used with inexpensive silicon or gallium arsenide detectors, but excellent performance can also be achieved with some indium gallium arsenide detectors (see HFD3180-103 and FT-D3180-108 product data sheets).
4.25 Gb/s 850nm VCSEL - LC TOSA
This product is a high-performance 850nm VCSELs (Vertical Cavity Surface-Emitting Lasers) designed for high-speed data communications and packaged with a custom designed power monitor diode. The power monitor diode can be used with appropriate feedback control circuitry to set a maximum power level for the VCSEL. These combined features simplify design for high data rate communication and eye safety.
10G 850nm PIN + Preamp - LC ROSA with RSSI
The FT-D6180-421 uses a high-performance GaAs PIN photo-detector packaged with a transimpedance amplifier designed to meet performance requirements for 10Gbps data communication over multi-mode optical fiber at 850nm. Applications include Ethernet, Fiber Channel and ATM protocols. The optical assembly is designed to interface either 50mm or 62.5mm multi-mode fiber.
The FT-D6180-421 is designed to be paired with Advanced Optical Components FT-E6x9x VCSEL 10Gbps TOSA products (see data sheets for FT-E6x9x products).
SFP+ Bail and Latch Assembly
These parts are designed to provide the latching and release mechanism for pluggable SFP+ modules. Finisar offers the bail and latch as piece parts for external sale to module manufacturers for use within particular modules. The bail is available in various colors as listed in the Product Features tab.
1/2/4/8 Gb/s 850nm VCSEL - LC TOSA
The FT-E7192-xxx uses a high-performance Vertical Cavity Surface Emitting Laser (VCSEL) designed to meet performance requirements for 1/2/4/8 Gbps data communication over multimode optical fiber for the ANSI X2.T11 Fibre Channel protocols. The optical assembly is designed to interface either 50μm or 62.5μm multimode fiber and ensure launch conditioning requirements compatibility with enhanced bandwidth fiber as specified by TIA 455-203.
超小型18CH-Mini-CCWDM波分复用器
超小型18CH-Mini-CCWDM波分复用器,工业级超小型18CH-Mini-CCWDM波分复用器,超小型18CH-Mini-CCWDM波分复用器价格,工业级超小型18CH-Mini-CCWDM波分复用器价格,超小型18CH-Mini-CCWDM波分复用器厂家,工业级超小型18CH-Mini-CCWDM波分复用器厂家
Optic Specifications
|
Items |
18CH |
|
Operating wavelength |
1260-1620nm |
|
Channel spacing |
20nm |
|
Passband |
±6.5nm |
|
Insertion Loss |
≤2.5 dB |
|
Adjacent ChannelIsolation |
≥28dB |
|
Non Adjacent ChannelIsolation |
≥45dB |
|
Return Loss |
≥45 dB ( for UPC)、≥50 dB ( for APC) |
|
PDL |
≤0.2 dB |
|
Ripple |
≤0.5 dB |
|
Directivity |
≥50dB |
|
Power handling |
300mw
|
|
Package Dimension |
L44xW41xH11mm
|