标准光模块
8G Long-Wavelength SFP+ Transceiver
Specifications
- 产品型号: FTCS-XX85-10X
- 兼容品牌: 全系列
- 封装类型: SFP+
- 传输速率: Up to 8.5 Gb/s
- 传输距离: 1km~10km
- 发射波长: 1310nm
- 接收波长: 1310nm
- 工作温度: 商业级0℃～+70℃/工业级-40℃～+85℃ 可选
- 数字诊断: 带DDM
- 接收灵敏度: 1km~10km
- 接收灵敏度: 1km~10km
Description
8 Gigabit Long-Wavelength SFP+ Transceiver
F-tone's FTCS-XX85-XX SFP+ transceivers are designed for use in Fibre Channel links up to 1.4 km at 8.5 Gb/s data rate. These transceivers also support 4 km at 4.25 Gb/s and 10 km at 2.125 Gb/s. They are compliant with FC-PI-4 Rev. 8.00, SFF-8432 and SFF-8472 Rev 10.2, and compatible with applicable portions of SFF-8431 Rev 3.0. The product is RoHS compliant and lead-free per Directive 2002/95/EC and F-tone Application Note FN-2038.
Key Features
- Up to 8.5 Gb/s bi-directional data links
- Hot-pluggable SFP+ footprint
- Built-in digital diagnostic functions
- 1310nm Fabry-Perot transmitter
- Duplex LC connector
- RoHS compliant and Lead Free
- Up to 1.4 km at 8 Gb/s on 9/125μm SMF
- Metal enclosure, for lower EMI
- Single 3.3V power supply
- Extended operating temperature range: 0°C to 70°C/-40°C to 85°C
Applications
- Tri Rate 2.125 / 4.25 / 8.5 Gb/s Fibre Channel through Rate Select
Specifications
Related Products
XFP-850多模光模块
Supports 9.95Gbps to 10.5Gbps bit rates
Maximum link length of 300m (50um,MMF,2000MHz.Km)
850nm VCSEL laser and PIN receiver
Low power consumption <1.5W
+3.3V +1.8Vpower supply
XFP MSA package with duplex LC connector
XFI electrical interface
No reference clock required
Compatible with RoHS
Excelllent EMI performance
Built-in digital diagnostic functions
Temperature range: 0℃ to +70℃
High reliability
SFP+ 850nm多模光模块
- Hot-pluggable SFP+ footprint
- Supports rate selectable 1.25 Gb/sOr 9.95 to 10.3 Gb/s bit rates
- Power dissipation < 1W
- RoHS-6 compliant ( lead-free )
- Single 3.3V power supply
- Maximum link length of 300m on2000 MHZ-km MMF
- Uncooled 850nm VCSEL laser
- Receiver limiting electrical interface
- Duplex LC Connector
- Built-in digital diagnostic functions
- Commercial temperature range： 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
10Gbps SFP+ 10KM单模光模块
- Optical interface compliant to IEEE 802.3ae 10GBASE-LR
- Electrical interface compliant to SFF-8431
- Hot Pluggable
- 1310nm DFB transmitter, PIN photo-detector
- Operating case temperature: 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- Low power consumption
- Applicable for 10km SMF connection
- All-metal housing for superior EMI performance
- Advanced firmware allow customer system encryption information to be stored in transceiver
- Cost effective SFP+ solution, enables higher port densities and greater bandwidth
10Gbps SFP+ 40KM单模光模块
- Compliant with SFF-8431 and IEE802.3ae
- Data rate selectable ≤4.25Gbps or 9.95Gbps to 10.3Gbps bit rates
- Cooled EML transmitter and PIN receiver
- link length up to 40km
- Low Power Dissipation 1.5W Maximum
- Operating Case Temperature：0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- Single 3.3V power supply
- Diagnostic Performance Monitoring of module temperature, supplyVoltages, laser bias current, transmit optical power, receive optical power
- RoHS compliant and lead free
10Gbps SFP+ 80KM单模光模块
- Compliant with SFF-8431 and IEE802.3ae
- Data rate selectable ≤4.25Gbps or 9.95Gbps to 11.3Gbps bit rates
- Cooled EML transmitter and APD receiver
- link length up to 80km
- Low Power Dissipation 1.4W Typical (Maximum:2W)
- Operating Case Temperature:0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- Single 3.3V power supply
- Diagnostic Performance Monitoring of module temperature, supplyVoltages, laser bias current, transmit optical power, receive optical power
- RoHS compliant and lead free
zSFP+ 互连系统
F-tone 为 25 Gbps 串行通道推出首个完整的 zSFP+ 互连系统，为新一代以太网和光纤通道应用提供具有卓越 EMI 保护的无与伦比的信号完整性
zSFP+ SMT 20 电路连接器和屏蔽罩组件提供绝佳的信号完整性和电磁干扰 (EMI) 保护。
F-tone 的 zSFP+ SMT 连接器支持电流为 10 Gbps 的以太网和 16 Gbps 的光纤通道应用，并能够支持高达 40 Gbps 的串行通道。首选的接合设计使用窄边、耦合盲插、形成接触的构型以及嵌件成型，以优化电气性能。zSFP+ 连接器具有与 SFP+ 型式相同的 PCB 覆盖区、接合界面以及 EMI 屏蔽罩尺寸，使其向后兼容。